Browse > Article
http://dx.doi.org/10.4191/KCERS.2002.39.9.818

Redistribution of an Intergranular-Liquid Phase During Sintering of 1 mol%-Al2O3-doped Calcia-Stabilized Zirconia: Estimation by Impedance Spectroscopy  

Choi, Jung-Hae (School of Materials Science and Engineering and Center for Microstructure Science of Materials, Seoul National University)
Lee, Jong-Heun (School of Materials Science and Engineering and Center for Microstructure Science of Materials, Seoul National University)
Kim, Doh-Yeon (School of Materials Science and Engineering and Center for Microstructure Science of Materials, Seoul National University)
Publication Information
Journal of the Korean Ceramic Society / v.39, no.9, 2002 , pp. 818-821 More about this Journal
Abstract
The grain boundary resistivity of a 1-mol%-$Al_2O_3$-dopedd CaO-Stabilized Zirconia(CSZ) specimen was determined by impedance spectroscopy using sub-millimeter-scale electrodes. At the initial stage of sintering, the grain-boundary resistivity of the specimen interior was observed to be higher than that of the surface. However, upon further sintering the boundary resistivity of the specimen interior became lower than that of the surface. The results were explained in terms of a redistribution of the intergranular liquid phase. The liquid phase was predicted to initially coagulate at the interior of the specimen then spread outward during sintering.
Keywords
$Al_2O_3$-doped CSZ; Sintering; Redistribution of liquid phase; Impedance spectroscopy; Grain boundary resistivity;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 H.-H. Park, S.-J. Cho and D.-N. Yoon, 'Pore Filling Process in Liquid Phase Sintering,' Metall. Trans. A, 15A 1075-80 (1984)   DOI
2 O.-J. Kwon and D. N. Yoon, 'Closure of Isolated Pores in Liquid Phase Sintering of W-Ni,' Int. J. Powder Metall., 17 [2] 127-33 (1981)
3 J. S. Reed, Principles of Ceramic Processing, A Wiley-Interscience Publication, P.25 (1995)
4 J.-H. Lee, J. H. Lee and D.-Y. Kim, 'The Inhomogeneity of Grain-boundary Resistivity in Calcia-stabilized Zirconia,' J. Am. Ceram. Soc., 85 [6] 1622-24 (2002)   DOI   ScienceOn
5 T. M. Shaw, 'Liquid Redistribution during Liquid-phase Sintering,' J. Am. Ceram. Soc., 69 [1] 27-34 (1986)   DOI   ScienceOn
6 M. Miyayama, H. Yanagida and A. Asada, 'Effect of $Al_2O_3$ Addition on Resistivity and Microstructure of Yttria-stabilized Zircoma,' Am. Ceram. Soc. Bull., 65 [4] 660-64 (1986)
7 J.-W. Moon, G.-D. Kim, K.-T. Lee and H.-L. Lee, 'Effect of YSZ Particle Size and Sintering Temperature on the Microstructure and Impedance Property of Ni-YSZ Anode for Solid Oxide Fuel Cell,' J. Kor. Ceram. Soc., 38 [5] 466-73(2001)
8 D. P. E. De Souza and M. F. De. Souza, 'Liquid Phase Sintering of $Re_2O_3$: YSZ Ceramics' Part I Grain Growth and Expelling of the Grain Boundary Glass Phase,' J. Mater. Sci., 34 4023-30 (1999)   DOI   ScienceOn
9 O.-J. Kwon and D. N. Yoon, 'The Liquid Phase Sintering of W-Ni,' in Sintering and Related Phenomena, edited by G C. Kuczynski, Plenum Publishing Company, pp.203-218, 1980
10 Y.-S. Yoo, J.-J. Kim and D.-Y. Kim, 'Effect of Heating Rate on the Microstructural Evolution During Sintering of Ba$TiO_3$, Ceramics,' J. Am. Ceram. Soc., 70 [11] C322-24 (1987)
11 J.-H. Lee and S.-H. Cho, 'Effect of Abnormal Grain Growth and Heat Treatment on Electrical Properties of Semiconducting Ba$TiO_3$ Ceramics,' J. Kor. Ceram. Soc., 39 [1] 21-5(2002)   DOI   ScienceOn
12 S. J. Kim, K. H. Kim, S. J. Oh, T. K. Kang and I. H. Kuk, 'Effect of Microstructural Design on the Electrical Properties of $Y_2\O_3$-stabilized $ZrO_2$' J. Kor. Ceram. Soc., 30 [9]717-22 (1993)
13 J.-H. Lee, T. Mori, J.-G. Li, T. Ikegami and S. Takenouchi, 'Impedance Spectroscopic Estimation of Inter-granular Phase Distribution in 15 mo1% Calcia-stabilized Zircoma/Alumina Composites,' J. Euro. Ceram. Soc., 21 [1] 13-7 (2001)   DOI   ScienceOn
14 J.-H. Han and D.-Y. Kim, 'Analysis of the Proportionality Constant Correlating the Mean Intercept Length to the Average Grain Size,' Acta Metall. Mater., 43 [81 3183-88(1995)