Browse > Article
http://dx.doi.org/10.21289/KSIC.2022.25.5.783

Elastic Wave Properties of STS316L with Different Subzero Temperature and Time  

Lee, Gum-Hwa (Dept. of Marine Design Convergence Engineering, Pukyong National University)
Gu, Kyoung-Hee (Dept. of Marine Design Convergence Engineering, Pukyong National University)
Tak, Young-Joon (Department of Materials Science and Engineering, Pukyong National University)
Kwon, Yung-Kug (Department of Materials Science and Engineering, Pukyong National University)
Shin, Ki-Hang (Department of Materials Science and Engineering, Pukyong National University)
Nam, Ki-Woo (Dept. of Marine Design Convergence Engineering, Pukyong National University)
Publication Information
Journal of the Korean Society of Industry Convergence / v.25, no.5, 2022 , pp. 783-789 More about this Journal
Abstract
In this study, STS316L rolled at five rolling degrees were treated with two types of subzero temperatures for 10, 30, and 60 minutes, respectively, and the dominant frequencies of elastic waves was investigated. The dominant frequency was higher as the subzero temperature was lower and the subzero treatment time was longer at each rolling degree. On the other hand, the dominant frequency was higher as the elongation decreased. In the time-frequency analysis for subzero temperature and time of the specimen with a rolling degree of 33%, the dominant frequency was higher at a subzero temperature of -196℃ than -50℃ regardless of subzero treatment time.
Keywords
STS316L; Dominant Frequency; Elastic Wave; Rolling Degree; Subzero Temperature and Time;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 E. B. Zaretsky, G. I. Kanel, "Tantalum and vanadium response to shock-wave loading at normal and elevated temperatures. Non-monotonous decay of the elastic wave in vanadium", Journal of Applied Physics, vol. 115, 243502, (2014).   DOI
2 Z. Chuanzeng, C. Xinshuang, L. Zongrong, "Interaction of elastic waves with a periodic array of collinear inplane cracks", Acta Mechanica Sinica, vol. 8, pp. 328-335, (1992).   DOI
3 C. K. Mukhopadhyay, T. K. Haneef, S. K. Gupta, V. Bhasin, S. Vishnuvardhan, G. Raghava, P. Gandhi, "Use of Acoustic Emission f or Studying Ratcheting Behavior of 304LN Stainless Steel Elbows", Journal of Acoustic Emission, vol. 36, pp. 9-29, (2019).
4 K. W. Nam, A. Mal, "Characteristics of elastic waves generated by crack initiation in aluminum alloys under fatigue loading", Journal of Materials Research, vol. 16, pp. 1745-1751, (2001).   DOI
5 K. W. Nam, B. K. Ahn, S. C. Lee, "Acoustic Emission of Heat Treated Compacted Graphite Iron under 873~1173 K", Journal of the Korean Society for Nondestructive Testing, vol. 33, pp. 415-421, (2013).   DOI
6 Y. J. Tak, K. H. Gu, G. H. Lee, K. W. Nam, "Elastic Wave Properties of STS316L with Different Rolling Temperature", Journal of the Korean Society of Industry Convergence, vol. 25, pp. 325-331, (2022).   DOI
7 J. Skoczylas, M. Klonica, S. Samborski, "A study on the FRP composite's matrix damage resistance by means of elastic wave propagation analysis, Composite Structures", vol. 297, 115935, (2002).
8 Y. H. Hong, K. Song, "Ef f ect of Cryogenic Treatment on Wear Resistance of STD 11 Steel", Journal of the Korean Society for Heat Treatment, vol. 16, pp. 134-140, (2003).
9 R. F. Barron, "Cryogenic treatment of metals to improve wear resistance", Cryogenics, vol. 22,, pp. 409-413, (1982).   DOI
10 T. H. Ju, J. D. Achenbach, L. J. Jacobs, J. Qu, "Nondestructive evaluation of thermal aging of adhesive joints by using a nonlinear wave mixing technique", NDT & E International, vol.103, pp. 62-67, (2019).   DOI
11 F. J. Rescalvo, C. Abarkane, E. Suarez, A. Gallego, "Acoustic Emission analysis during bending tests of timber beams reinforced with carbon fiber composite", Journal of Acoustic Emission, vol. 35, pp. s41s48, (2018).
12 P. H. Wen, M. H. Aliabadi, D. P. Rooke, "The influence of elastic waves on dynamic stress intensity factors (three-dimensional problems)", Archive of Applied Mechanics, vol. 66, pp. 385-394, (1996).   DOI
13 L. B. Freund, "The stress intensity f actor due to normal impact loading of the f aces of a crack", International Journal of Engineering Science, vol. 12, pp. 179-189, (1974).   DOI
14 Y. Chen, H. Li, L. Hou, X. Bu, "FFeature extraction using dominant frequency bands and time-frequency image analysis for chatter detection in milling", Precision Engineering, vol. 56, pp. 235-245, (2019).   DOI
15 O. D. Mohammed, M. Rantatalo, "JDynamic response and time-frequency analysis for gear tooth crack detection", Mechanical Systems and Signal Processing, vol. 66-67, pp. 612-624, (2016).   DOI
16 J. W. Kim, S. H. Ahn, S. Y. Lee, K. W. Nam, J. Y. Do, " Wavelet Analysis of Elastic Wave for Wall Thinned High-Pressure Service Pipes", Journal of the Korean Institute of Gas, vol. 9 pp.1-8, (2005).
17 H. S. Kim, M. K. Kim, J. W. Kim, S. H. Ahn, K. W. Nam, "Strength of Crack Healed-Specimen and Elastic Wave Characteristics of Al2O3/SiC Composite Ceramics", Transactions of the KSME A, vol. 31, pp. 425-431, (2007).   DOI
18 S. G. Lee, B. C. Choi, K. W. Nam, "Elastic Wave Characteristics of Incoloy 825 with Different Solution Treatment Temperature and Aging Time", Journal of the Korean Society of Industry Convergence, vol. 24, pp. 261-269, (2021).   DOI
19 K. W. Nam, H. Jeon, K. S. Lee, Y. J. Tak, "Elastic Wave Properties of STS202 depending on Rolling Temperature and Rolling Degree", Journal of Power System Engineering, vol. 25, pp. 15-22, (2021).   DOI
20 N. R. V. Bangaru, A. K. Sachdev, "Influence of cooling rate on the microstructure and retained austenite in an intercritically annealed vanadium containing HSLA steel", Metallurgical Transactions A, vol. 13, pp. 1899-1906, (1982).   DOI
21 A. Ning, R. Gao, S. Yue, H. Guo, L. Li, "Effects of cooling rate on the mechanical properties and precipitation behavior of carbides in H13 steel during quenching process", Materials Research Express, vol. 8, Paper No. 016503, (2021).
22 J. Sobotova, P. Jurci, I. Dlouhy, "The effect of subzero treatment on microstructure, fracture toughness, and wear resistance of Vanadis 6 tool steel", Materials Science and Engineering A, vol. 652, pp. 192-204, (2016).   DOI
23 R. F. Barron, C. R. Mulhern, "Cryogenic Treatment of AISI-T8 and C1045 Steels", In: Clark A.F., Reed R.P. (eds) Advances in Cryogenic Engineering Materials. Springer, Boston, MA, (1980).
24 H. G. Nanesa, M. Jahazi, "Alternative phase transformation path in cryogenically treated AISI D2 tool steel", Materials Science and Engineering A, vol. 634, pp. 32-36, (2015).   DOI