Browse > Article
http://dx.doi.org/10.5050/KSNVE.2014.24.4.332

Characteristics of Friction Noise with Changes of the Natural Frequencies in the Reciprocating Motion  

Choi, Hoil (Division of Automotive & Mechanical Engineering, Kongju National University)
Kang, Jaeyoung (Division of Automotive & Mechanical Engineering, Kongju National University)
Publication Information
Transactions of the Korean Society for Noise and Vibration Engineering / v.24, no.4, 2014 , pp. 332-338 More about this Journal
Abstract
Experimental study is conducted for investigating the characteristics of friction-induced noise with respect to the variation of system geometry. In this study, a vertically fixed rod is in contact with the reciprocating plate which is controlled by the step motor. Friction noise is generated during the reciprocating motion due to the frictional contact between the plastic pin and the aluminum plate. The frequencies of the friction noise are changed when the height of the rod varies. However, it is found that the vibration modes involved in the friction noise are not changed. It implies that the unstable modes remain unstable regardless of the change of the system geometry, and thus, there are the certain mode shapes which are likely to produce friction noise.
Keywords
Friction Noise; Reciprocation; Natural Frequency;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Choi, H. and Kang, J., 2013, Experimental Study under Reciprocating Sliding on the Friction Noise, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 23, No. 7, pp. 640-644.   과학기술학회마을   DOI   ScienceOn
2 Autay, R., Kchaou, M. and Dammak, F., 2012, Friction and Wear Behavior of Steels under Different Reciprocating Sliding Conditions, Tribology Transactions, Vol. 55, No. 5, pp. 590-598.   DOI
3 Chen, G. X. and Zhou, Z. R., 2007, Time-frequency Analysis of Friction-induced Vibration Under Reciprocating Sliding Conditions, Wear, Vol. 262, No. 1-2, pp. 1-10.   DOI   ScienceOn
4 Drees, D., Celis, J. P. and Achanta, S., 2004, Friction of Thin Coatings on Three Length Scales under Reciprocating Sliding, Surface and Coatings Technology, Vol. 118-189, pp. 511-518.
5 Mo, J. L., Wang, Z. G. and Chen, G. X., 2013, The Effect of Groove-textured Surface on Friction and Wear and Friction-induced Vibration and Noise, Wear, Vol. 301, No. 1-2, pp. 671-681.   DOI   ScienceOn
6 Park, C. W., Shin M. W. and Jang, H., 2014, Friction-induced Stick-slip Intensified by Corrosion of Gray Iron Brake Disc, Wear, Vol. 309, pp. 89-95.   DOI   ScienceOn
7 Nam, J. and Kang, J., 2013, Brake Squeal Analysis with Respect to Caliper Contact Stiffness, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 23, No. 8, pp. 717-724.   과학기술학회마을   DOI   ScienceOn
8 Nam, J. and Kang, J., 2013, Characteristics of Friction Noise with Respect to Friction Curve, Transactions of The Korean Society for Noise and Vibration Engineering, Vol. 23, No. 5, pp. 423-430.   과학기술학회마을   DOI   ScienceOn
9 Sherrington, I. and Hayhurst, P., 2001, Simultaneous Observation of the Evolution of Debris Density and Friction Coefficient in Dry Sliding Steel Contacts, Wear, Vol. 249, No. 3-4, pp. 182-187.   DOI   ScienceOn
10 Grandin, M. and Wilkund, U., 2013, Effects of Surface Texturing on Friction and Vibration Behaviors of Sliding Lubricated Concentrated Point Contacts under Linear Reciprocating Motion, Tribology International, Vol. 62, pp. 198-207.   DOI