Browse > Article
http://dx.doi.org/10.5050/KSNVE.2013.23.4.301

Dynamic Characteristics Analysis for the Online Monitoring System Designing KTX MRU and Improvement of the Stability Related Variable High Speed  

Park, Byung Su (KTM engineering Inc.)
Kim, Jin Woo (KORAIL Research Institute Technology Research Department)
Choi, Sang Rak (KORAIL Research Institute Technology Research Department)
Song, Young Chun (KTM engineering Inc.)
Publication Information
Transactions of the Korean Society for Noise and Vibration Engineering / v.23, no.4, 2013 , pp. 301-307 More about this Journal
Abstract
MRU(motor reduction unit) for KTX is a assembled complex structure that is equipped with a lot of parts at the express train KTX and that is the core power source operating variable speeds. This study is recorded the dynamic characteristics analysis results tested by EMA which is done through the parts and assembly test, transient analysis and stoped train test in order to design the online monitoring system for KTX MRU. And the mode shapes result from critical vibration frequency explain the relation with variable speeds of express train over 250 km/hr. Also these variable speeds make variable operational frequencies at pinion, axle gear mesh frequency and normal bearing fault frequencies. As the specified speed can make resonance with natural frequencies of the MRU, for the train operating stability, this study also presents the MRU's critical speeds calculated by the each train speed.
Keywords
Gear Mesh Frequency; MRU; EMA(experimental modal analysis); Transient Analysis; Gear Box;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Berry, J. E., 2003, Analysis Special Vibration Signature Analysis Time Waveforms and Related Technologies Required to Evaluate Low High and Variable Speed Machines, Technical Associates of Charlotte, P.C, Charlotte.
2 Crawford, A. R. and Crawford, S., 1992, The Simplified Handbook of Vibration Analysis Volume 2, Computational Systems Incorporated, Knoxville.
3 Lee, S. H., Kim, K. J. and Ha, J. Y., 2000, An Experimental Study on Tooth-meshing Frequency Components in Noise/Vibration of a Gearbox Under Operational Conditions, Proceedings of the KSNVE Annual Spring Conference, pp. 1096-1101.
4 Eom, B. G. and Lee, H. S., 2012, Dynamic Analysis for Improvement of Running Stability of Rubber Tired AGT Localization Bogie, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 22, No. 4, pp. 307-317.   과학기술학회마을   DOI   ScienceOn
5 Ewins, D. J., 2000, Modal Testing 2nd Ed, Research Studies Press LTD. Hertfordshire.
6 Randall, R. B., 2011, Vibration-based Condition Monitoring, John Wiley & Sons, Inc. West Sussex.
7 Smith, J. D., 2003, Gear Noise and Vibration 2nd Ed, Marcell Dekker INC, New York.