Browse > Article
http://dx.doi.org/10.5050/KSNVE.2012.22.10.985

Identification of Airborne-noise Source and Analysis for Noise Source Contribution of a GDI Engine Using Sound Intensity Method  

Kim, Byung-Hyun (AVSP Lab., Department of Mechanical Engineering, Inha University)
Lee, Sang-Kwon (AVSP Lab., Department of Mechanical Engineering, Inha University)
Yoon, Joon-Seok (Kefico)
Shin, Ki-Chul (Kefico)
Lee, Sang-Jik (Kefico)
Publication Information
Transactions of the Korean Society for Noise and Vibration Engineering / v.22, no.10, 2012 , pp. 985-993 More about this Journal
Abstract
In this paper, a new method is proposed to estimate the sound pressure generated from gasoline direct injection (GDI) engine. There are many noise sources as much as components in GDI engine. Among these components, fuel pump, fuel injector, fuel rail, pressure pump and intake/exhaust manifolds are major components generated from top of the engine. In order to estimate the contribution of these components to engine noise, the total sound pressure at the front of the engine is estimated by using airborne source quantification (ASQ) method. Airborne source quantification method requires the acoustic source volume velocity of each component. The volume velocity has been calculated by using the inverse method. The inverse method requires many tests and has ill-condition problem. This paper suggested a method to obtain volume velocity directly based on the direct measurement of sound intensity and particle velocity. The method is validated by using two known monopole sources installed at the anechoic chamber. Finally the proposed method is applied to the identification and contribution of noise sources caused by the GDI components of the test engine.
Keywords
GDI Engine; Sound Intensity; ASQ; Transfer Function;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Kinsler, L. E., 2000, Fundamentals of Acoustiecs, John Wiley & Sons. Inc.
2 Moschioni, G., Saggin, B. and Tarabini, M., 2007, Sound Source Identification Using Coherence and Intensity-Based Methods, IEEE, Vol. 56, No. 6, pp. 2478-2485,
3 Yang, J. J. and Lee, D. J., 2010, Identification of Noise Source of the HVAC Using Complex Acoustic Intensity Method, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 20, No. 11, pp. 1089-1096.   DOI
4 LMS International, Acousitic Intensity Measurement, 2011, Leuven, Belgium.
5 Fahy, F. J., 1987, Sound Intensity, Elsevier Applied Science.
6 Cheung, W. S., Suh, J. G. and Eun, H. J., 1997, Experimental Analysis of the Sound Radiation Characteristics of a Vibration Plate Using the Reciprocity Principle, Asia-Pacific Vibration Conference, pp. 876-881.
7 Byun, J. H. and Kang, Y. J., 2008, The Mathematical Model on Crosstalk Effect of Airborne Noise Sources and Verfication based on Comparison between Transfer Path Analysis Methods, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 18, No. 9, pp. 943-951.   DOI
8 Fleszar, A. R., van der Linden, P. J. G., Johnson, J. F. and Grimmer, M. J., 2001, Combining Vehicle and Test-bed Diagnosis Information to Guide Vehicle Development for Pass-by Noise, SAE, VDI-Berichte, No. 1616, pp. 317-327.
9 Kim, S. J. and Lee, S. K., 2009, Prediction of Structure-borne Noise caused by the Powertrain on the Basis of the Hybrid Transfer Path, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Vol. 223, No. 4, pp. 485-502.