Browse > Article
http://dx.doi.org/10.5050/KSNVN.2009.19.9.899

Modal Characteristics and Vibration Control of Cylindrical Shell Structure : Experimental Results Comparison in the Air and Water  

Sohn, Jung-Woo (인하대학교 기계공학과)
Kwon, Oh-Cheol (인하대학교 기계공학과)
Choi, Seung-Bok (인하대학교 기계공학부)
Publication Information
Transactions of the Korean Society for Noise and Vibration Engineering / v.19, no.9, 2009 , pp. 899-906 More about this Journal
Abstract
In the present paper, dynamic characteristics and vibration control performance of a cylindrical shell structure are experimentally investigated and results are presented in the air and underwater conditions. End-capped cylindrical shell structure is manufactured and macro-fiber composite(MFC) actuators are attached on the inside-surface of the structure. Modal characteristics are studied in the air and under the water conditions and then equation of motion of the structure is derived from the test results. Structural vibration control performances of the proposed structure are evaluated via experiments with optimal control algorithm. Vibration control performances are presented both in the frequency and time domains.
Keywords
Cylindrical Shell Structure; Modal Characteristics; Vibration Control; Underwater Structure; Piezoelectric Composite Actuator;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Wilkie, W. K., Bryant, R. G., High, J. W., Fox, R. L., Hellbaum, R. F., Jalink, A., Little, B. D. and Mirick, P. H., 2000, “Low-cost Piezocomposite Actuator for Structural Control Applications,” Proceedings of Seventh SPIE International Symposium on Smart Structures and Materials, Newport Beach, CA, pp. 329-334
2 Wilkie, W., High, J. and Bockman, J., 2002, “Reliability Testing of NASA Piezocomposite Actuators,” ACTUATOR 2002, pp. 270-273
3 Williams, R. B., Schultz, M. R., Hyer, M. W., Inman, D. J. and Wilkie W. K., 2004, “Nonlinear Tensile and Shear Behavior of Macro Fiber Composite Actuators,” Journal of Composite Materials, Vol. 38, No, 10, pp. 855-870   DOI   ScienceOn
4 Sodano, H. A., Park, G. and Inman, D. J., 2004, “An Investigation into the Performance of Macro-fiber Composites for Sensing and Structural Vibration Applications,” Mechanical Systems and Signal Processing, Vol. 18, pp. 683-697   DOI   ScienceOn
5 Park, G., Ruggiero, E. J. and Inman, D. J., 2002, “Dynamic Testing on Inflatable Structures Using Smart Materials,” Smart Materials and Structures, Vol. 11, No. 1, pp. 147-155   DOI   ScienceOn
6 Ruggiero, E. J., Park, G. and Inman, D. J., 2004, “Multi-input Multi-output Vibration Testing of an Inflatable Torus,” Mechanical Systems and Signal Processing, Vol. 18, No. 5, pp. 1187-1201   DOI   ScienceOn
7 Sohn, J. W., Kim, H. S. and Choi, S. B., 2007, “Vibration Suppression of Hull Structure Using MFC Actuators,” Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 17, No. 7, pp. 587-595   DOI   ScienceOn
8 Kwak, M. K. and Jung, M., 2007, “Dynamic Modeling, Active Vibration Controller Design and Experiments for Cylindrical Shell Equipped with MFC Actuators,” Proceedings of the KSNVE Annual Autumn Conference, pp. KSNVE07A-21-4
9 Chopra, I., 2002, “Review of State-of-Art of Smart Structures and Integrated Systems,” AIAA Journal, Vol. 40, pp. 2145-2187   DOI   ScienceOn
10 Gandi, M. V. and Thompson, B. S., 1992, “Smart Materials and Structures,” Chapman & Hall, New York
11 Qui, J. and Tani, J., 1995, “Vibration Control of a Cylindrical Shell Using Distributed Piezoelectric Sensors and Actuators,” Journal of Intelligent Material Systems and Structures, Vol. 6, pp. 474-481   DOI   ScienceOn