Browse > Article
http://dx.doi.org/10.5050/KSNVN.2009.19.6.583

A New Type of Active Engine Mount System Featuring MR Fluid and Piezostack  

Lee, Dong-Young (인하대학교 기계공학과)
Sohn, Jung-Woo (인하대학교 기계공학과)
Choi, Seung-Bok (인하대학교 기계공학부)
Publication Information
Transactions of the Korean Society for Noise and Vibration Engineering / v.19, no.6, 2009 , pp. 583-590 More about this Journal
Abstract
An engine is one of the most dominant noise and vibration sources in vehicle systems. Therefore, in order to resolve noise and vibration problems due to engine, various types of engine mounts have been proposed. This work presents a new type of active engine mount system featuring a magneto-rheological (MR) fluid and a piezostack actuator. As a first step, six degrees-of freedom dynamic model of an in-line four-cylinder engine which has three points mounting system is derived by considering the dynamic behaviors of MR mount and piezostack mount. In the configuration of engine mount system, two MR mounts are installed for vibration control of roll mode motion whose energy is very high in low frequency range, while one piezostack mount is installed for vibration control of bounce and pitch mode motion whose energy is relatively high in high frequency range. As a second step, linear quadratic regulator (LQR) controller is synthesized to actively control the imposed vibration. In order to demonstrate the effectiveness of the proposed active engine mount, vibration control performances are evaluated under various engine operating speeds(wide frequency range) and presented in time domain.
Keywords
Engine; Hybrid Engine Mount; MR Fluid; Piezostack Actuator; Optimal Control;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Hong, S. R. and Choi, S. B., 2005, “Vibration Control of a Structural System Using Magnetorheological Fluid Mount,” Journal of Intelligent Material System and Structures, Vol. 16, No. 11-12, pp. 931-936   DOI   ScienceOn
2 Yook, J. Y., Choi, S. B., Sung, K. G. and Moon, S. J., 2007, “Design of Hybrid Mount Using Rubber Element and Piezoelectric Actuator with Application to Vibration Control,” Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 17, No. 5, pp. 390-397   과학기술학회마을   DOI   ScienceOn
3 Takayoshi, K., Takafumi, F., Takayoshi, H., Takeo, A., Nobuyoshi, M., Satoru, A. and Kohtaro, T., 1997, “Active Vibration Control of Frame Structures with Smart Structures Using Piezoelectric Actuators(Vibration Control by Control of Bending Moments of Columns),” Smart Materials Structures, Vol. 6, pp. 448-456   DOI   ScienceOn
4 Jolly, M. R., Bender, J. W. and Carlson, J. D., 1998, “Properties and Applications of Commercial Magneto Rheological Fluids,” Proceedings of the SPIE's 5th Annual Symposium on Smart Structures and Materials, Vol. 3327, pp. 262-275
5 Taylor, C, F, 1995, “The Internal Com- bustion Engine in Theory and Practice,” Vol. 2, Chp. 8, M.I.T. Press
6 Seki, Y. and Suzuki, T., 2001, “How to Predict Powertrain Vibration at the Engine Mounting Points under Running Conditions,” SAE 2001- 01-1592, pp. 1-5
7 Choi, S. B., Sohn, J. W., Han, Y. M. and Kim, J. W., 2008, “Dynamic Characteristics of Threeaxis Active Mount Featuring Piezoelectric Actuators,” Journal of Intelligent Material Systems and Structures, Vol. 19, No. 9, pp. 1053-1066   DOI   ScienceOn
8 Bernuchon, M., 1984, “A New Generation of Engine Mounts,” SAE, 840259, pp. 230-236
9 Yu, Y., Naganathan, N. G., Dukkipati, R. V., 2001, “A Literature Review of Automotive Vehicle Engine Mounting Systens,” Mechanism and Machine Theory, Vol. 36, pp. 123-142   DOI   ScienceOn
10 Sakai, T., Iwahara, M., Shirai, Y., Hagiwara, I., 2001, “Optimum Engine Mounting Layout by Genetic Algorithm,” SAE 2001-01-2810, pp. 1-7
11 Kim, S. H., Hong, S. R. and Choi, S. B., 2003, “Vibration Control of Flexible Beam Using Hybrid Mount,” Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 13, No. 7, pp. 524-531   DOI   ScienceOn