Browse > Article
http://dx.doi.org/10.5050/KSNVN.2009.19.3.268

A Study on the Fault Detection of Auto-transmission Using the Vibrational Characteristics of Roller Bearings  

Park, Ki-Ho (현대파워텍 기술연구소)
Jung, Sang-Jin (현대파워텍 기술연구소)
Wee, Hyuk (현대파워텍 기술연구소)
Lee, Gook-Sun (현대파워텍 기술연구소)
Cho, Seong-Ho (현대파워텍 기술연구소)
Publication Information
Transactions of the Korean Society for Noise and Vibration Engineering / v.19, no.3, 2009 , pp. 268-273 More about this Journal
Abstract
The roller bearings play an important role not only sustain radial or axial load of system, but carry out a rotatory movement as a various operating conditions. They happen that incipient faults which were caused by excessive load, manufacturing or assembling process's errors and many other reasons are created. The bearing faults make noise and vibration by a continuous collision of rotatory components, which can lower the quality and stability of auto-transmission. Therefore, it is important to detect the early fault as soon as possible. This paper presents a detecting method for the improvement in quality by developing the program which can be used to analyze and predict the vibrational characteristics caused by roller bearing faults. We completed development of the inspection system of vibration by applying the most efficient detecting methods and verified the system's reliability through experiments.
Keywords
Auto-transmission; Needle Roller Bearing; Fault Detection; Early Fault; Vibrational Characteristics;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 McFadden, P. D. and Smith, J. D., 1984, “Model for the Vibration Produced by a Single Point Defect in a Rolling Element Bearing,” Journal of Sound and Vibration, Vol. 96, pp. 69~82   DOI   ScienceOn
2 Taylor, J. I., 1980, 'Identification of Bearing Defects by Spectral Analysis,' Journal of Mechanical Design, Vol. 102, pp. 199~204   DOI
3 Park, C. S., Choi, Y. C, Kim., Y. H. and Ko, E. S., 2002, “Bearing Ultra-fine Fault Detection Method and Application,” Proceedings of the KSNVE Annual Autumn Conference 2002, pp. 1093~1096
4 Kim, H. S. and Lee, S. K., 2002, “Bearing Fault Diagnostics in a Gearbox,” Proceedings of the KSNVE Annual Autumn Conference 2002, pp. 611~616
5 Park, K. H., Jung, S. J., Wee, H., Kim, J. S., Han, K. S. and Kim, M. H., 2008, “A Study on the Fault Detection of Auto-transmission According to Gear Damage,” Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 18, No. 1, pp. 47~56   DOI   ScienceOn
6 Yoo, J. H., Yoon, J. H., Kim, S. K. and Lee, J. M., 1995, “Automatic Diagnosis of Defects in Roller Element Bearings,” Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 5, No. 3, pp. 353~360
7 Johannes Brandlein and Paul Eschmann, 1999, “Ball and Roller Bearings,” 1999 Wiley, pp. 92~97, 421~458