Browse > Article
http://dx.doi.org/10.5050/KSNVN.2003.13.5.400

Vibration Characteristics of Steam Generator U-tubes with Defect  

조종철 (한국원자력안전기술원 규제기술연구부)
정명조 (한국원자력안전기술원 원자력안전연구실)
김웅식 (한국원자력안전기술원 규제기술연구부)
김효정 (한국원자력안전기술원 규제기술연구부)
김태형 (한국전력기술주식회사 구조해석분야)
Publication Information
Transactions of the Korean Society for Noise and Vibration Engineering / v.13, no.5, 2003 , pp. 400-408 More about this Journal
Abstract
This paper investigates the vibration characteristics of steam generator (SG) U-tubes with defect. The operating SG shell-side flow field conditions for determining the fluidelastic instability parameters such as added mass are obtained from three-dimensional SG flow calculation. Modal analyses are performed for the U-tubes either with axial or circumferential flaw with different sizes. Special emphases are on the effects of flaw orientation and size on the modal and instability characteristics of tubes, which are expressed in terms of the natural frequency, corresponding mode shape and stability ratio. Also, addressed is the effect of the internal pressure on the vibration characteristics of the tube.
Keywords
Steam Generator; U-tube; Fluidelastic Instability; Natural Frequency; Mode Shape; Through-wall Crack; Internal Pressure;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 ANSYS, 2001, ANSYS Structural Analysis Guide, ANSYS, Inc., Houston.
2 Corners, H. J., 1981, "Flow-induced Vibration and Wear of Steam Generator Tubes," Nuclear Technology, Vol. 55, pp. 311-331.
3 Eisinger, F. L. and Juliano, T. M., 1975, "Flow-induced Vibration Analysis of Recuperator Tube Bank," Foster Wheeler Energy Corp. Report 156-MA-75-48.
4 Jhung, M. J. and Jeong K. H., 2001, "Natural Vibration Analysis of Two Circular Plates Coupled with Bounded Fluid," 한국소음진동공학논문집, 제 11권, 제 9호, pp. 439-453.   과학기술학회마을
5 Pettigrew, M. J., Rogers, R. J. and Axisa, F., 1986, "Damping of Multi-span Heat Exchanger Tubes, Part 2 : In Liquids," ASME Publication PVP-Vol. 104, New York.
6 Eisinger, F. L., Rao, M. S. M. and Steininger, D. A., 1989, "Numerical Simulation of Fluidelastic Instability of Multispan Tubes Partially Exposed to Crossflow," SMiRT-10, Vol. T, pp. 45-57.
7 Keeton, L. W. and Singhal. A. K., 1986, "ATHOS3 : A Computer Program for Thermal Hydraulic Analysis of steam Generators," EPRI Report NP-4604-CCM, Vols. 1-3.
8 Chen, S. S. and Chung, H., 1976, "Design Guide for Calculating Hydrodynamic Mass, Part 1 : Circular Cylindrical Structures," ANL Report ANL-CT-76-45, Argonne, IL.
9 Pettigrew, M. J., Taylor, C. E. and Kim, B. S., 1989, "Vibration of Tube Bundles in Two-phase Cross-flow: Part 1 Hydrodynamic Mass and Damping," ASME Journal of Pressure Vessel Technology, Vol. III, pp. 466-477.
10 Pettigrew, M. J., Carlucci, L. N., Taylor, C. E. and Fisher, N. J., 1991, "Flow-induced Vibration and Related Technologies in Nuclear Components," Nuclear Engineering and Design, Vol. 131, pp. 81-100.   DOI   ScienceOn