Browse > Article
http://dx.doi.org/10.12772/TSE.2019.56.424

Effects of Drawing Conditions on the Properties of PBT/PTMGT-based Elastomeric Fibers  

Lee, Il Jae (Department of Advanced Organic Materials and Textile System Engineering, Chungnam National University)
Seo, Moo Song (Department of Advanced Organic Materials and Textile System Engineering, Chungnam National University)
Choi, Sung Wook (Department of Advanced Organic Materials and Textile System Engineering, Chungnam National University)
Kim, Hyun Taek (Department of Advanced Organic Materials and Textile System Engineering, Chungnam National University)
Baik, Doo Hyun (Department of Advanced Organic Materials and Textile System Engineering, Chungnam National University)
Publication Information
Textile Science and Engineering / v.56, no.6, 2019 , pp. 424-432 More about this Journal
Abstract
Segmented block copolyetheresters based on poly(butylene terephthalate) (PBT) as a hard segment and poly(tetramethylene ether glycol) (PTMG) as a part of a soft segment were synthesized with varying hard segment content (HSC). The number average molecular weights of PTMG selected for use in this study were 650, 1000, 1800. The effects of the HSC and PTMG's molecular weight on the thermal properties of the copolyetheresters were examined, and five samples were selected for melt-spinning. From the results of the mechanical properties of the samples, we concluded that copolyetherester having 30 wt% of HSC with PTMGT 1800 is the best candidate among the copolymers tested for elastomeric fiber application. The fiber prepared from HSC 30 and PTMG 1800 was then drawn at various drawing temperatures and ratios. When the draw ratio was held constant, fibers drawn at higher temperature showed higher tenacity but lower elongation at break. This result is proposed to be due to the differences in the effectiveness of heat on the crystallinity, crystal size, and crystal orientation increments during the hot drawing process.
Keywords
segmented block copolyetheresters; elastomeric fiber; hot drawing; mechanical property;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Y. Qiu, J. Wang, D. Wu, Z. Wang, M. Zhang, Y. Yao, and N. Wei, "Thermoplastic Polyester Elastomer Nanocomposites Filled with Graphene: Mechanical and Viscoelastic Properties", Compos. Sci. Technol., 2016, 132, 108-115.   DOI
2 N. Stribeck, D. Sapoundjieva, Z. Denchev, A. A. Apostolov, H. G. Zachmann, M. Stamm, and S. Fakirov, “Deformation Behavior of Poly(ether ester) Copolymer as Revealed by Small-and Wide-angle Scattering of X-ray Radiation from Synchrotron”, Macromolecules, 1997, 30, 1329-1339.   DOI
3 W. Gabrielse, M. Soliman, and K. Dijkstra, "Microstructure and Phase Behavior of Block Copoly(ether ester) Thermoplastic Elastomers", Macromolecules, 2001, 34, 1685-1693.   DOI
4 J. Hu, J. Lu, and Y. Zhu, "New Developments in Elastic Fibers", Polym. Rev., 2008, 48, 275-301.   DOI
5 Y. Su, J. Yu, Y. Wang, J. Zhu, and Z. Hu, "Effect of Hard Segment Length on the Properties of Poly(ether ester) Elastomer Prepared by One Pot Copolymerization of Poly(ethylene glycol) and Cyclic Butylene Terephthalate", J. Polym. Res., 2015, 22, 193-202.   DOI
6 T. Y. Lee, C. H. Lee, S. Cho, D. H. Lee, and K. B. Yoon, "Enhancement of Physical Properties of Thermoplastic Polyether-ester Elastomer by Reactive Extrusion with Chain Extender", Polym. Bull., 2011, 66, 979-990.   DOI
7 K. Mathur, E. ElNashar, P. J. Hauser, and A. F. M. Seyam, "Stretch Potential of Woven Fabrics Containing Spandex", In The 5th International Conference of Textile Research Division, National Research Center Cairo, Egypt, 2008.
8 H. Ismail, "Thermoplastic Elastomers Based on Polypropylene/ natural Rubber and Polypropylene/recycle Rubber Blends", Polym. Test., 2002, 21, 389-395.   DOI
9 S. Cho, Y. Jang, D. Kim, T. Lee, D. Lee, and Y. Lee, "High Molecular Weight Thermoplastic Polyether Ester Elastomer by Reactive Extrusion", Polym. Eng. Sci., 2009, 49, 1456-1460.   DOI
10 A. Szymczyk, E. Senderek, J. Nastalczyk, and Z. Roslaniec, "New Multiblock Poly(ether-ester) s Based on Poly(trimethylene terephthalate) as Rigid Segments", Eur. Polym. J., 2008, 44, 436-443.   DOI
11 H. Y. Kim, B. R. Jeon, and D. H. Baik, "Synthesis and Thermal Properties of Segmented Block Copolyetheresters Based on Poly(butylene terephthalate) and Poly(tetramethylene ether glycol)", Proceedings of the Korean Fiber Society Conference, The Korean Fiber Society, 1996, pp.176-179.
12 A. A. Deschamps, D. W. Grijpma, and J. Feijen, “Poly(ethylene oxide)/Poly(butylene terephthalate) Segmented Block Copolymers: the Effect of Copolymer Composition on Physical Properties and Degradation Behavior”, Polymer, 2001, 42, 9335-9345.   DOI
13 A. Szymczyk, "Structure and Properties of New Polyester Elastomers Composed of Poly(trimethylene terephthalate) and Poly(ethylene oxide)", Eur. Polym. J., 2009, 45, 2653-2664.   DOI
14 D. H. Baik and H. Y. Kim, "Synthesis and Properties of Segmented Block Copolyetherester Elastomers Based on PTT, PBT, PBN and Poly(tetramethylene ether glycol)(I)-Synthesis and Thermal Properties", Text. Sci. Eng., 2005, 42, 217-227.
15 E. R. Wright, R. A. McMillan, A. Cooper, R. P. Apkarian, and V. P. Conticello, "Thermoplastic Elastomer Hydrogels via Self‐assembly of an Elastin‐mimetic Triblock Polypeptide", Adv. Funct. Mater., 2002, 12, 149-154.   DOI
16 V. Aleksandrovic and J. Djonlagic, "Synthesis and Characterization of Thermoplastic Copolyester Elastomers Modified with Fumaric Moieties", J. Serb. Chem. Soc.(Yugoslavia), 2001, 66, 139-152.   DOI
17 J. M. Huang and F. C. Chang, "Crystallization Kinetics of Poly(trimethylene terephthalate)", J. Polym. Sci. Pol. Phys., 2000, 38, 934-941.   DOI
18 S. Benmesli and F. Riahi, "Dynamic Mechanical and Thermal Properties of a Chemically Modified Polypropylene/natural Rubber Thermoplastic Elastomer Blend", Polym. Test., 2014, 36, 54-61.   DOI