Browse > Article
http://dx.doi.org/10.12772/TSE.2019.56.171

Preparation and Characterization of PAN-based Carbon Felt for Electrode  

Choi, Da Hee (Human Convergence Technology Group, Korea Institute of Industrial Technology)
Lee, Jae-Chul (Human Convergence Technology Group, Korea Institute of Industrial Technology)
Kim, Ki-Young (Human Convergence Technology Group, Korea Institute of Industrial Technology)
Publication Information
Textile Science and Engineering / v.56, no.3, 2019 , pp. 171-176 More about this Journal
Abstract
In this paper, carbon felt was produced by carbonizing and graphitizing Oxi-PAN fiber (oxidized polyacrylonitrile fiber, stabilized fiber) nonwoven fabric. The physical, mechanical and electrical properties of the carbon felt produced in this way were compared with those of commercialized carbon fiber felt for conventional Redox Flow Battery. As the GSM of Oxi-PAN increased, the porosity and pore size decreased. The GSM after carbonization of the prepared Oxi-PAN felt sample was reduced by about 40%, but the differences according to the carbonization and graphitization temperature conditions showed little change in all the basic characteristics except electrical resistivity and tensile characteristics. The specific resistivity was reduced to $1.25{\Omega}{\cdot}mm$ at $2000^{\circ}C$ compared to about $2.05{\Omega}{\cdot}mm$ at $1000^{\circ}C$ based on the Oxi-PAN 900 GSM sample. Compared with commercial products, carbon felt made with Oxi-PAN 900 GSM is considered to be the best electrode.
Keywords
PAN; carbon fiber; carbon felt; electrode;
Citations & Related Records
연도 인용수 순위
  • Reference
1 R. Schweiss, “Influence of Bulk Fibre Properies of PAN-based Carbon Felts on Their Performance in Vanadium Redox Flow Batteries”, J. Power Sources, 2015, 278, 308-313.   DOI
2 A. D. Blasi, O. D. Blasi, N. Briguglio, A. S. Arico, D. Sebastian, M. J. Lazaro, G. Monforte, and V. Antonucci, “Investigation of Several Graphite-based Electrodes for Vanadium Redox Flow Cell”, J. Power Sources, 2013, 227, 15-23.   DOI
3 M. E. Lee, S. H. Lee, H. J. Jin, and Y. S. Yun, "Standalone Macroporous Graphitic Nanowebs for Vanadium Redox Flow Batteries", J. Ind. Eng. Chem., 2018, 60, 85-90.   DOI
4 J. Langner, M. Bruns, D. Dixon, A. Nefedov, C. Woll, F. Scheiba, H. Ehrenberg, C. Roth, and J. Melke, “Surface Properties and Graphitization of Polyacrylonitrile Based Fiber Electrodes Affecting the Negative Half-cell Reaction in Vanadium Redox Flow Batteries”, J. Power Sources, 2016, 321, 210-218.   DOI
5 M. H. Chakrabarti, N. P. Brandon, S.A . Hajimolana, F. Tariq, V. Yufit, M. A. Hashim, M. A. Hussain, C. T. J. Low, and P. V. Aravind, “Application of Carbon Materials in Redox Flow Batteries”, J. Power Sources, 2014, 253, 150-166.   DOI
6 R. Schweiss, “Influence of Bulk Fibre Properties of PAN-based Carbon Felts on their Performance in Vanadium Redox Flow Batteries”, J. Power Sources, 2015, 278, 308-313.   DOI
7 I. L. Spain, "Electronic Transport Properties of Graphite, Carbons, and Related Materials", Chem. Phys. Carbon, 1981, 16, 119-124.
8 S. Hong, C. Padeste, M. Kazacos, and M. S. Kazacos, "Comparison of the Physical, Chemical and Electrochemical Properties of Rayon- and Polyacrylonitrile-based Graphite Felt Electrodes", J. Power Sources, 1993, 45, 29-41.   DOI
9 L. M. Manocha, H. Bhatt, and S. M. Manocha, “Development of Carbon/carbon Composites by Co-carbonization of Phenolic Resin and Oxidised PAN Fibers”, Carbon, 1996, 34, 841-849.   DOI
10 I. L. Spain, K. J. Volin, H. A. Goldberd, and I. Kalnin, “Electronic Properties of Pan-based Carbon Fibers-I: Experiment and Comparison with Properties of Bulk Carbons”, J. Phys. Chem. Solids, 1983, 44, 839-849.   DOI
11 C. Minke, U. Kunz, and T. Turek, “Carbon Felt and Carbon Fiber - A Techno-economic Assessment of Felt Electrodes for Redox Flow Battery Applications”, J. Power Sources, 2017, 342, 116-124.   DOI
12 M. S. A. Rahaman, A. F. Ismail, and A. Mustafa, "A Review of Heat Treatment on Polyacrylonitrile Fiber", Polym. Degrad. Stab., 2007, 92, 1421-1432.   DOI
13 Y. C. Chiang and C. C. Lee, "Characterization of Microstructure and Surface Properties of Heat-treated PAN-and Rayon-based Activated Carbon Fibers", J. Porous. Mater., 2007, 14, 227-237.   DOI