Browse > Article
http://dx.doi.org/10.12772/TSE.2018.55.425

Adhesion Characteristics and Air Permeability of PP Mono-component and PE/PP Sheath-core Nonwovens Affected by Differences in Thermal Bonding Behavior  

Choi, Sejin (Department of Organic Material Science and Engineering, Pusan National University)
Lee, Do Jun (Department of Organic Material Science and Engineering, Pusan National University)
Park, Choong Ryoel (Jeongsan International)
Lee, Hyun Seok (Korea Textile Development Institute)
Kim, Han Seong (Department of Organic Material Science and Engineering, Pusan National University)
Publication Information
Textile Science and Engineering / v.55, no.6, 2018 , pp. 425-431 More about this Journal
Abstract
Herein, the thermal adhesion behavior of polypropylene (PP) mono-component and polyethylene/PP sheath-core non-wovens was investigated. The materials generally showed good mechanical properties and environmental benefits. The proper bonding temperature was determined because thermal bonding among fiber networks results in adversely affects bonding strength and structural integrity. The morphology of the adhesive interface, thermal shrinkage, wrinkle properties, and compressive properties were also characterized and showed that differences in thermal behaviors due to the material and dimensional variation affected bonding strength and air permeability. It is expected that these results, that also include flexibility and durability measurements, will provide guidance for the manufacturing of products containing these materials.
Keywords
thermal bonding; bonding strength; thickness; heat transfer;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 K. J. Ryu and C. Y. Park, "Synthesis and Properties of Ecofriendly Polyurethane Adhesive without Solvent : Effect of DPE-41, TDI, Initiator and Plasticizer Content", J. Environ. Sci. Int., 2014, 23, 1909-1918.   DOI
2 Y. S. Chun, Y. K. Hong, and K. H. Chung, "Functional Improvement of Hot Melt Adhesive Using Polyamide Type Resin-(I) Physical Properties of Adhesives", J. Korean Ind. Eng. Chem., 1996, 7, 194-202.
3 L. Wang and F. Iidal, "Physical Connection and Disconnection Control Based on Hot Melt Adhesives", IEEE-ASME Transactions on Mechatronics, 2013, 18, 1397-1409.   DOI
4 K. H. Chung, Y. K. Hong, and Y. S. Chun, "Functional Improvement of Hot Melt Adhesive Using Polyamide Type Resin (II) The Effects of Terpene Resin", J. Korean Ind. Eng. Chem., 1998, 9, 226-231.
5 M. J. Choi, B. Y. Jeong, J. M. Cheon, C. S. Ha, and J. H. Chun, "Adhesioin Property of Low-Viscosity Polyurethane Hot-Melt Adhesive in according to the Deblocking Temperature and Content of Reactive Diluents", J. Adhes. Interface, 2016, 17, 67-71.   DOI
6 E. Masaeli, M. Morshed, and H. Tavanai, "Study of the Wettability Properties of Olypropylene Nonwoven Mats by Low-pressure Oxygen Plasma Treatment", Surface and Interface Analysis, 2007, 39, 770-774.   DOI
7 O. G. Armagan, B. K. Kayaoglu, H. C. Karakas, and F. S. Guner, "Adhesion Strength Behaviour of Plasma Pre-treated and Laminated Polypropylene Nonwoven Fabrics Using Acrylic and Polyurethane-based Adhesives", J. Ind. Text., 2014, 43, 396-414.   DOI
8 S. B. Gwak and S. R. Lee, "The Technology of Lightweight Interior Parts in Automotive with Uni-material & Process", Journal of the Korean Society of Automotive Engineers, 2011, 33, 39-47.   DOI
9 L. Wang and F. Iidal, "Physical Connection and Disconnection Control Based on Hot Melt Adhesives", IEEE-ASME Transactions on Mechatronics, 2013, 18, 1397-1409.   DOI
10 M. C. Lee, M. C. Park, and I. S. Seo, "Environment-friendly Adhesives", Fiber Sci. Technol., 2000, 11, 450-459.
11 J. H. Cheon, "Technical Trend of High Functional Adhesive Material", J. Adhes. Interface, 2016, 17, 72-76.
12 H. S. Ju, H. R. Yun, S. M. Yeon, and K. T. Ko, "Case Study on the Target Products for Applicable Uni-materailization", Clean Technology, 2013, 19, 173-183.   DOI
13 J. S. Kim, J. K. Yang, J. S. Kim, and M. H. Hong, "A Study on the Necessity of Package Used the Uni-Material: Focused on the Personal and Household Care Products Package", J. Korean Society of Design Culture, 2012, 18, 64-73.
14 J. S. Shin, J. M. Park, Y. H. Lee, and H. D. Kim, "Preparation and Properties of Eco-friendly Waterborne Polyurethane-urea Primer for Thermoplastic Polypropylene Applied to Automobile Interiors", Clean Technology, 2014, 20, 232-240.   DOI
15 D. Mann, "Automotive Plastics & Composites", 2nd ed., Elsevier Advanced Technology, UK, 1999, pp.28-30.
16 H. P. Lee and Y. T. Kim, "A Study on the Fire Risk of Car Interior Materials", Journal of Korean Institute of Fire Science and Engineering, 2010, 24, 82-88.
17 C. H. Kim, S. J. Choi, H. S. Lee, and H. S. Kim, "Study on the Olefin Adhesion Layer Produced by Melt-blowing LDPE", Text. Sci. Eng., 2016, 53, 68-74.   DOI
18 J. S. Youm and H. J. Kang, "Adhesioin Mechanism of Polyurethane Adhesive for Laminated Steel Plate", Polymer (Korea), 2012, 36, 119-123.   DOI
19 S. Choi, J. H. Lim, and H. S. Kim, "Effect of Bonding Temperature on the Adhesion Characteristics and Mechanical Properties of Non-woven LMPET/PET", Text. Sci. Eng., 2018, 55, 112-117.
20 F. Rombaldoni, K. Mahmood, A. Varesano, M. B. Songia, A. Aluigi, C. Vineis, and G. Mazzuchetti, "Adhesion Enhancement of Electrospun Nanofiber Mats to Polypropylene Nonwoven Fabric by Low-temperature Oxygen Plasma Treatment", Surface & Coatings Technology, 2013, 216, 178-184.   DOI
21 M. Kucuk and Y. Korkmaz, "Sound Absorption Properties of Bilayered Nonwoven Composites", Fiber. Polym., 2015, 16, 941-948.   DOI
22 J. Lee, S. Lee, J. Shim, P. Jung, W. Lee, and B. Bang, "The Study on Improvement of Acoustic Performance for Automobile Sound-absorbing Materials Using Hollow Fiber", Transactions of the Korean Society for Noise and Vibration Engineering, 2011, 21, 850-857.   DOI
23 S. J. Choi, D. J. Lee, H. S. Lee, and H. S. Kim, "Thermal Behavior of Mono-component and Sheath-core Nonwoven Polyolefin", Text. Sci. Eng., 2017, 54, 80-86.   DOI
24 C. J. Choi, H. J. Kim, Y. C. Jin, and H. S. Kim, "Objective Wrinkle Evaluation System of Fabrics Based on 2D FFT", Fiber. Polym., 2009, 10, 260-265.   DOI