Browse > Article
http://dx.doi.org/10.12772/TSE.2017.54.278

Dynamic Behavior of Staples in a One-Directional Flow Field  

Kim, Jong S. (Department of Mechanical Engineering, College of Engineering, Kyunghee University)
Lim, Jung Ho (Laboratory for Intelligent and Innovative Process and Control, Kyunghee University)
Huh, You (Department of Mechanical Engineering, College of Engineering, Kyunghee University)
Publication Information
Textile Science and Engineering / v.54, no.4, 2017 , pp. 278-286 More about this Journal
Abstract
This study deals with the dynamic characteristics of staples flowing in a one-directional flow field, when external forces exerted on the staples are generated at both the ends of the flow field. Based on a theoretical model describing fiber bundle flow dynamics, we introduced the effect of staple length on model parameters such as the speed variance of individual staples and the kinematic viscosity of staples through a beard diagram. Simulations for investigating the dynamic behaviors of the staple flow variables, namely, the average speed of the staples and the linear density of the staple bundle, were conducted numerically with respect to time and position in the flow field under predetermined conditions. The results indicated that the output linear density of the staple bundle has a periodic change, which could be explained by the dynamic behavior of the staples in the flow field. The dynamic distribution of the average speed of staples has a continuously increasing profile, which changes with time. Thus, the change in speed distribution leads to fluctuations in the linear density of the staple bundle. The acceleration of the staple bundle also fluctuated with time, which got stronger while approaching the exit of the flow field. This indicates that the output staple bundle could be very sensitive to the disturbances occurring near the exit. The fluctuation in output linear density was influenced by the length of the flow field. When the length of the flow field is short (the ratio of the field length to the maximum staple length is approximately 1.1), the fluctuation in linear density has a single peak in the amplitude spectrum. However, when the flow field becomes longer (the ratio of the field length to the maximum staple length is approximately 1.5), the spectrum of the linear density fluctuation shows multiple peaks.
Keywords
flow field; staples; average speed; linear density; fluctuations; disturbances; mode; field length; spectrum;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 P. F. Grishin, "A Theory of Drafting and Its Practical Applications." J. Text. Inst., 1954, 45, 167-266.   DOI
2 J. S. Rao, "A Mathmatical Model for the Ideal Sliver and Its Application to the Theory of Roller Drafting", J. Text. Inst., 1961, 52, T571-T601.   DOI
3 J. S. Rao, "Theory of Roller Drafting-II", J. Text. Inst., 1962, 53, T464-T476.   DOI
4 H. Balasubramanian, P. Grosberg, and Y. Turkes, "Studies in Modern Yarn Production", Textile Institute, Manchester, 1968, p.150.
5 B. Dutta and P. Grosberg, "The Dynamic Response of Drafting Tension to Sinusoidal Variations in Draft Ratio under Conditions of Sliver Elasticity in Short-staple Drafting", J. Text. Inst., 1973, 64, 534-540.   DOI
6 Y. Huh and J. L. Woo, "Identification of the Dynamic Behavior of Sliver by the Roller Drafting (1) - Structure Identification of the Dynamic Model -", J. Korean Fiber Soc., 1993, 30, 527-536.
7 B. Choi and Y. Huh, "Identification of the Dynamic Behavior of Sliver by the Roller Drafting (2) - Estimation of the Digital Model Parameters for the Thickness Behavior of the Output Sliver -", J. Korean Fiber Soc., 1995, 32, 300-307.
8 Y. Huh and J. S. Kim, "Modeling the Dynamic Behavior of the Fiber Bundle in a Roll-Drafting Process", Text. Res. J., 2004, 74, 872-878.   DOI
9 Y. Huh and J. S. Kim, "Effect of Material parameters and Process Conditions on the Roll-Drafting Dynamics", Fiber. Polym., 2006, 7, 424-431.   DOI
10 Y. Huh and J. S. Kim, "Steady-Flow Characteristics of Bundle Fluid in Drawing", Trans. of the KSME (B), 2006, 30, 612-621.
11 J. S. Kim and Y. Huh, "Operation Adjustment and Sliver Thickness Variation in Roller Drafting", Text. Sci. Eng., 2011, 48, 201-213.
12 J. Ho Lim, J. S. Kim, and Y. Huh, "Efficacy of the Velocity Variance Model to Estimate the Thickness Irregularity in a Fiber Bundle Flow", Text. Sci. Eng., 2011, 48, 322-329.