Browse > Article
http://dx.doi.org/10.12772/TSE.2014.51.096

Short-Term Compressive Properties and Transmissivity of Geonets  

Jeon, Han-Yong (Department of Applied Organic Materials Engineering, Inha University)
Publication Information
Textile Science and Engineering / v.51, no.2, 2014 , pp. 96-100 More about this Journal
Abstract
The relationship between the manufacturing parameters and the compressive behaviors of a traditional bi-planar geonet, the effect of various test conditions on the compression test results for bi- and tri-planar geonets, and the correlation between the normal pressure and the transmissivity of bi- and tri-planar geonets were investigated. The geonet strand inclination can mainly affect the after-compressive strength, i.e., roll-over behavior. For both bi- and tri-planar geonets, the compressive strength decreased and the strain at the yield point increased gradually with temperature. A significant reduction in flow capacity was observed for the traditional bi-planar geonet, and this value was consistent with the compressive strength. These decreases were anticipated owing to the abrupt thickness decrease in the geonet caused by roll-over. On the other hand, no significant decrease was observed in the transmissivity for the tri-planar geonet, which did not roll over.
Keywords
bi-planar; tri-planar geonets; flow capacity; compressive strength; roll-over behavior; transmissivity;
Citations & Related Records
연도 인용수 순위
  • Reference
1 R. J. Fannin, "Factors Influencing the Long-term Flow Capacity of Geonets", 3rd International Conference on Geosynthetics, 1995, pp.267-280.
2 N. S. Rad, C. Gokmen, and J. M. Stalcup, "Factors Affecting Hydraulic Transmissivity of Geocomposite Drain Systems", 6th International Conference on Geosynthetics, 1998, pp.1055-1058.
3 A. Zhao, "Effect of Soil Presence on Flow Capacity of Drainage Geocomposites under High Normal Loads", 7th International Conference on Geosynthetics, 1999, pp.799-812.
4 R. M. Koerner, "Designing with Geosynthetics", 5th ed., Chapter 5, Prentice Hall Inc., NJ, 2005.
5 R. M. Koerner and G. R. Koerner, "Geocomposite Drainage Materials Connections and Attachments", GRI-22 Conference, Salt Lake City, 2009, pp.57-65.
6 S. Allen, "Measuring the Strand Inclination Angle of a Biplanar Geonet", Proceeding of the Geosynthetics 2007 Conference, 2007, pp.79-92.
7 B. Kopp, "Membrane Sealing for an Irrigation Canal KIRKUK IRAQ", Geosynthetics Case Histories, International Society for Soil Mechanics and Foundation Engineering, 1993, pp.48-49.
8 I. D. Peggs, C. Lawrence, and R. Thomas, "The Oxidation and Mechanical Performance of HDPE Geomembrane: a More Practical Durability Parameter", Proceedings of the 7th IGS, 2002, pp.779-782.
9 D. Narejo, "Design Strength for Geonet Geocomposite", Proceedings of the Geoysnthetics 2007 Conference, 2007, pp.71-78.
10 D. Narejo, "Long-term Performance Considerations for Geonet Drainage Geocomposites", 57th Canadian Geotechnical Conference, Session 6D, 2005, pp.12-15.
11 S. S. Yeo and Y. G. Hsuan, "The Short and Long Term Compressive Behavior of HDPE Geonets and Geocomposites under Inclined Conditions", J Geotext Geomembr., 2007, 14(3), 154-164.
12 A. E. Eith, C. P. Ballod, G. R. Koerner, and R. M. Koerner, "Long Term Flow Rate Evaluation of Degraded MSW Placed Directly on Sand and Gravel Drainage Media", Proc. Global Waste Mgmt. Symp., Copper Mt., Colorado, NSWMA, (CD only), 2008.