1 |
Kubo S, Yokota H, Yokota H, Hayashi Y : The effect of light-curing modes on the microleakage of cervical resin composite restorations. J Dent, 32:247-254, 2004.
DOI
|
2 |
Karthick K, Sivakumar K, Geetha P, Shankar S : Polymerization Shrinkage of Composites - A Review. J Ind Acad Dent Spec, 2:32-36, 2011.
|
3 |
Winkler MM, Katona TR, Paydar NH : Finite element stress analysis of three filling techniques for class V light-cured composite restorations. J Dent Res, 75:1477-1483, 1996.
DOI
|
4 |
Versluis A, Douglas WH, Cross M, Sakaguchi RL : Does an incremental filling technique reduce polymerization shrinkage stresses? J Dent Res, 75:871- 878, 1996.
DOI
|
5 |
Manhart J, Hickel R : Bulk-fill-composites. Modern application technique of direct composites for posterior teeth. Swiss Dent J, 124:19-37, 2014.
|
6 |
Czasch P, Ilie N : In vitro comparison of mechanical properties and degree of cure of bulk fill composites. Clin Oral Investig, 17:227-235, 2013.
DOI
|
7 |
Bucuta S, Ilie N : Light transmittance and micromechanical properties of bulk fill vs. conventional resin based composites. Clin Oral Investig, 18:1991- 2000, 2014.
DOI
|
8 |
Moorthy A, Hogg CH, Fleming GJ, et al. : Cuspal deflection and microleakage in premolar teeth restored with bulk-fill flowable resin-based composite base materials. J Dent, 40:500-505, 2012.
DOI
|
9 |
Campos EA, Ardu S, Krejci I, et al. : Marginal adaptation of class II cavities restored with bulk-fill composites. J Dent, 42:575-581, 2014.
DOI
|
10 |
Alrahlah A, Silikas N, Watts DC : Post-cure depth of bulk fill dental resin-composites. Dent Mater, 30: 149-154, 2014.
DOI
|
11 |
El-Damanhoury H, Platt J : Polymerization shrinkage stress kinetics and related properties of bulk-fill resin composites. Oper Dent, 39:374-382, 2014.
DOI
|
12 |
Leprince JG, Palin WM, Leloup G, et al. : Physicomechanical characteristics of commercially available bulk-fill composites. J Dent, 32:247-254, 2014.
|
13 |
Scotti N, Comba A, Berutti E, et al. : Microleakage at enamel and dentin margins with a bulk fills flowable resin. Eur J Dent, 8:1-8, 2014.
DOI
|
14 |
Jang JH, Park SH, Hwang IN : Polymerization shrinkage and depth of cure of bulk-fill resin composites and highly filled flowable resin. Oper Dent, 40:172-180, 2015.
DOI
|
15 |
Roggendorf MJ, Kramer N, Frankenberger R, et al. : Marginal quality of flowable 4-mm base vs. conventionally layered resin composite. J Dent, 39:643- 647, 2011.
DOI
|
16 |
Van Ende A, De Munck J, Van Meerbeek B, et al. : Bulk-filling of high C-factor posterior cavities: effect on adhesion to cavity-bottom dentin. Dent Mater, 29:269-277, 2013.
DOI
|
17 |
Ilie N, Schoner C, Bucher K, Hickel R : An in-vitro assessment of the shear bond strength of bulk-fill resin composites to permanent and deciduous teeth. J Dent, 42:850-855, 2014.
DOI
|
18 |
Goodis HE, Marshall GW Jr, Marshall SJ, et al. : Storage effects on dentin permeability and shear bond strengths. Dent Mater, 9:79-84, 1993.
DOI
|
19 |
Flury S, Peutzfeldt A, Lussi A : Influence of increment thickness on microhardness and dentin bond strength of bulk fill resin composites. Dent Mater, 30:1104-1112, 2014.
DOI
|
20 |
El-Safty S, Silikas N, Watts DC : Creep deformation of restorative resin-composites intended for bulk-fill placement. Dent Mater, 28:928-935, 2012.
DOI
|
21 |
Kim CY, Shin DH : Microleakage of composite resin restoration according to the number of thermocycling. J Korean Acad Conserv Dent, 32:377-384, 2007.
DOI
|
22 |
Venhoven BA, de Gee AJ, Davidson CL : Polymerization contraction and conversion of lightcuring BisGMA-based methacrylate resins. Biomaterials, 14:871-875, 1993.
DOI
|
23 |
Sakaguchi RL, Wiltbank BD, Shah NC : Critical configuration analysis of four methods for measuring polymerization shrinkage strain of composites. Dent Mater, 20:388-396, 2004.
DOI
|
24 |
Yamazaki PC, Bedran-Russo AK, Pereira PN, Wsift EJ Jr : Microleakage evaluation of a new lowshrinkage composite restorative material. Oper Dent, 31:670-676, 2006.
DOI
|
25 |
Eick JD, Welch FH : Polymerization shrinkage of posterior composite resins and its possible influence on postoperative sensitivity. Quintessence Int, 17: 103-111, 1986.
|
26 |
Technical Manual - SureFil SDR Flow from Dentsply Caulk. Assessment service. Available from URL: http://www.surefilsdrflow.com/sites/default/ files/SureFil_Technical _Manual.pdf (Assessd on September 7, 2014)
|
27 |
Xu X, Sandras DA, Burgess JO : Shear bond strength with increasing light-guide distance from dentin. J Esthet Restor Dent, 18:19-27, 2006.
DOI
|
28 |
Scientific Compendium Venus BulkFill reported by Heraeus kulzer. Available from http://heraeus-kulzer- us.com/media/webmedia_local/media/pdf_files/ scientific _compendiums___from_hkg/Venus_Bulk_ Fill_Scientific_Compendium.pdf (Assessd on September 7, 2014)
|
29 |
Tetric N-Ceram Bulk Fill - Ivoclar Vivadent Asia. Assessment service. Available from URL: http://asia.ivoclarvivadent.com/zoolu-website/ media/document/15761/Tetric+N-Ceram+Bulk+ Fill (Assessd on September 7, 2014)
|
30 |
Alshali RZ, Silikas N, Satterthwaite JD : Degree of conversion of bulk-fill compared to conventional resin-composites at two time intervals. Dent Mater, 29:e213-e217, 2013.
DOI
|
31 |
A laboratory Evaluation of Bulk-Fill Versus Traditional Multi-Increment-Fill Resin-Based Composites reported by ADA Professional Product Review. Assessment service. Availabe from URL: http:// www.ada.org/-/media/ADA/Publications/PPR/PPR _VOL8_ISS3. ashx (Assessd on December 10, 2014)
|
32 |
Leloup G, D'Hoore W, Vreven J, et al. : Meta-analytical review of factors involved in dentin adherence. J Dent Res, 80:1605-1614, 2001.
DOI
|
33 |
Hwang SJ, Shin DH : Estimation of relation for microleakage and SEM evaluation for marginal adaptation of the restoration. J Korean Acad Conserv Dent, 31:337-343, 2006.
DOI
|
34 |
Knobloch LA, Gailey D, Kerby RE, et al. : Bond strengths of one- and two-step self-etch adhesive systems. J Prosthet Dent, 97:216-222, 2007.
DOI
|
35 |
Margvelashvili M, Goracci C, Ferrari M, et al. : In vitro evaluation of bonding effectiveness to dentin of all-in-one adhesives. J Dent, 38:106-112, 2010.
DOI
|