Browse > Article
http://dx.doi.org/10.3741/JKWRA.2011.44.4.263

A Simplified Design Method of Culvert Outlet for Detention Pond  

Jang, Joo-Young (School of Civil Engrg., Kumoh National Institute of Technology)
Lee, Jae-Joon (School of Civil and Environmental Engrg., Kumoh National Institute of Technology)
Publication Information
Journal of Korea Water Resources Association / v.44, no.4, 2011 , pp. 263-273 More about this Journal
Abstract
Recently increased rainfall by abnormal climate, risen peak runoff by urbanization, and shorten time of concentration are causing frequent overflow at downstream basin. This problem will be solved through the runoff reduction facilities like detention pond. However so far, most studies about detention pond in Korea are focused on its capacity. A study with respect to outlet facilities of detention pond was insignificant. Design of culvert usually used for outlet facilities of detention pond is generally carried out by using "Road Drainage Design" of Korea Expressway Corporation (1991). So detention pond is unreasonable to apply it. In this study, the culvert flow in submerged condition of upstream at culvert was analyzed., and simplified design procedure for culvert outlet facilities were presented for detention pond.
Keywords
detention pond; runoff reduction facilities; culvert outlet; simplified design procedure;
Citations & Related Records
Times Cited By KSCI : 7  (Citation Analysis)
연도 인용수 순위
1 Dasika, B. (1995). “New approach to design of culverts.” Journal of Irrigation and Drainage Engineering, Vol. 121, No. 3, pp. 261-264.   DOI
2 David, P.S., and Bedient, P.B. (1980). “Detention Storage for Urban Flood Control.” Journal ofWater Resources Planning and Management Division, ASCE. Vol. 106, No. WR2, pp. 413-425.
3 Guo, Y., and Urbonas, B. (1996). “Maximized Detention Volume Determined by Runoff Capture Ratio.” Journal of Water Resources Planning and Management, Vol. 122, No. 1, pp. 33-39.   DOI
4 Hager, W.H. (1998). “Generalized culvert design diagram.” Journal of Irrigation and Drainage Engineering. Vol. 124, No. 5, pp. 271-274.   DOI
5 Russell, M.G. (1980). “Analysis of Detention Basin Systems.” Water Resources Bulletin, Vol. 16, No. 5, pp. 824-829.   DOI
6 U.S Federal HighWay Administration (FHWA) (1985) Hydraulic Design of Highway Culverts.
7 U.S Federal HighWay Administration (FHWA) (2009) HY 8, Culvert Hydraulic Analysis Program, Version 7.2.
8 소방방재청, 한국방재협회(2005). 재해영향평가 실무지침서.
9 유동훈, 엄호식(2001). “원형 암거의 간편설계.” 2001년 한국수자원학회 학술발표회 논문집, 한국수자원학회, pp. 685-690.
10 윤여진, 이재철(2001). “계획강우의 지속기간에 따른 저류지용량의 산정.” 한국수자원학회논문집, 한국수자원학회, 제34권, 제5호, pp. 415-426.   과학기술학회마을
11 이길성, 진락선(2003). “사각형 암거 설계를 위한 프로그램의 개발.” 2003년도 대한토목학회 학술발표회논문집, 대한토목학회, pp. 2686-2689.
12 이정식, 이재준, 김규호, 오석호(1995). “도시유역에서 지체저류시설의 수문학적 설계에 관한 연구.” 한국수문학회지, 한국수문학회, 제28권, 제2호, pp. 159-173   과학기술학회마을
13 이재준, 이정식, 전병호, 이종태(1993). “우수관거 설계를 위한 계획강우의 임계지속기간; 서울 지역을 중심으로.” 한국수문학회지, 한국수문학회, 제26권, 제2호, pp. 49-57.   과학기술학회마을
14 이재준, 김호년(2008). “도시유역 저류지 위치에 따른 우수유출저감효과 분석.” 대한토목학회논문집, 대한토목학회, 제28권, 제5B호, pp. 535-546.   과학기술학회마을
15 이재준, 곽창재(2008). “우수유출저감용 저류지의 간편설계기법 개발.” 한국수자원학회논문집, 한국수자원학회, 제41권, 제7호, pp. 693-700.   과학기술학회마을   DOI
16 이종태, 윤세의, 이재준, 윤용남(1991). “도시화 영향을 고려한 유수지 계획모형.” 한국수문학회지, 한국수문학회, 제24권, 제4호, pp. 78-83.   과학기술학회마을
17 한국수자원학회(2005). 하천설계기준 해설.
18 한국도로공사(1991). 도로배수계획.
19 행정자치부 (2000-2008). 각종 개발사업 재해영향평가서. 소방방재청.
20 Bohler, B.A., and Hahn, E.M. (2005). “Sensitivity of Detention Basin Volume to Rainfall Input.” 2005 World Water and Environmental Resources Congress, EWRI 2005, pp. 15-19.
21 김대근, 고영찬(2005). “도심지 소유역에 적용 가능한 우수저류조의 용량 산정에 관한 연구.” 상하수도학회지논문, 상하수도학회, 제19권, 제5호, pp. 619-624.   과학기술학회마을
22 구혜진, 전경수(2008). “암거 설계 모형의 개발.” 2008년도 한국수자원학회 학술발표회 논문집, 한국수자원학회, pp. 645-649.