1 |
K. S. Moon, Strategic Utilization of Submarines and countermeasures Against North Korea Threats, Ph.D dissertation, Kyonggi University, Kyonggi, Korea, pp.1-5, 2019.
|
2 |
Naval & Special Ship Design Team, Diving Sys. Design Report, Design Review Report, Daewoo Shipbuilding & Marine Engineering Co.,LTD, Korea, 2009 (in Korea), pp.18.
|
3 |
R. B. Na, J. H. Seo and B. H. Kim, "A study for increasing the safety of gun firing system of patrol killer guided missile from failure mode analysis", Journal of the KIMST, Vol.20, No.2, pp.159-169, 2017. DOI: https://dx.doi.org/10.9766/KIMST.2017.20.2.159
DOI
|
4 |
H. S. Chang, K. W. Lee, Y. H. Choi, D. S. Seo, "Reliability analysis and its application based on quality information of submarine installed equipment during building stage", Journal of the Korean Society of Marine Engineering, Vol.41, No.9 pp.934-942, 2017. DOI: https://dx.doi.org/10.5916/jkosme.2017.41.9.934
DOI
|
5 |
S. C. Shin, J. W. Park, J. C. Lee, "An SE-Based System Architecture Process for Submarine's Basic Desig", Journal of the Korea Academia-Industrial cooperation Society, Vol.20, No.3 pp.91-99, 2019. DOI: https://doi.org/10.5762/KAIS.2019.20.3.91
DOI
|
6 |
S. U. Jung, H. G. Shim, M. J. Choi, "Measures for Improvement of RAM Target Value Setting Methods for Submarine Weapon Systems", Journal of the Korea Academia-Industrial cooperation Society, Vol.21, No.4 pp.419-427, 2020. DOI: https://doi.org/10.5762/KAIS.2020.21.4.419
DOI
|
7 |
K. B. Lee and J. H. Kim, "Design of leaf spring with high fatigue life applied to horizontal linear vibrating actuator", Journal of the Korea Academia-Industrial cooperation Society, Vol.13, No.12 pp.5684-5688, 2012. DOI: http://dx.doi.org/10.5762/KAIS.2012.13.12.5684
DOI
|
8 |
D. J. Lee, G. G. Kim and S. B. Shin, "Behavior of Global Bending Distortion of Hatch-cover in Container Carrier during Fabrication Process", Journal of the Korean Welding and Joining Society, Vol.28, No.4 pp.41-48, 2010. DOI: http://dx.doi.org/10.5781/KWJS.2010.28.4.041
DOI
|
9 |
Y. C. Byun and E. S. Kang, "Study on the Disturbance Applied to Launcher Hatch by Ship Motions", Journal of Institute of control, robotics and systems, Vol.19, No.12 pp.1111-1118, 2013. DOI: http://dx.doi.org/10.5302/J.ICROS.2013.13.1907
DOI
|
10 |
S. B. Shin, D. J. Lee and J. S. Lee, "A Study on the Predicting Transverse Residual Stress at the Ultra Thick FCA Butt Weldment of Hatch Coaming in a Large Container Vessel", Journal of the Korean Welding and Joining Society, Vol.28, No.4 pp.33-40, 2010. DOI: http://dx.doi.org/10.5781/KWJS.2010.28.4.033
DOI
|
11 |
S. H. Oh and B. L. Choi, "Prediction of Spring Rate and Initial Failure Load due to Material Properties of Composite Leaf Spring", Transactions of the Korean Society of Mechanical Engineers, Vol.38, No.12 pp.1345-1350, 2014. DOI: http://dx.doi.org/10.3795/KSME-A.2014.38.12.1345
DOI
|
12 |
N. G. Jeong, "A study on the behavior of the piston with orifice hole in the cylinder of a gas spring", Journal of the Korea Academia-Industrial cooperation Society, Vol.20, No.12, pp.125-130, 2019. DOI: https://doi.org/10.5762/KAIS.2019.20.12.125
DOI
|
13 |
B. H. Kim, Microstructure and Their Properties of Heat Resistant Mg Alloys by Squeeze Casting, Ph.D dissertation, Pusan National University, Busan, Korea, pp 50-54, 2012.
|