Browse > Article
http://dx.doi.org/10.5762/KAIS.2017.18.5.151

A study on the improvement of antenna switching module structure of ground based ES equipment  

Kim, Seung-Woo (Defense Agency for Technology and Quality)
Lee, Kang-Ho (LIGNex1 Co.,Ltd)
Chin, Hui-cheol (Defense Agency for Technology and Quality)
Choi, Jae-In (Defense Agency for Technology and Quality)
Publication Information
Journal of the Korea Academia-Industrial cooperation Society / v.18, no.5, 2017 , pp. 151-159 More about this Journal
Abstract
The aspect of modern warfare is gradually changing to a network of warfare, and its central information electronic warfare is evolving every day. Recently, domestic equipment of electronic warfare, which have succeeded in domestic localization, are strongly influenced by the nature of the environment. Therefore, the structural reliability of the antenna switching module that connects the mast and antenna of the ES equipment is the most important. This study proposed a structure that has an improved structure of antenna switching module by currently analyzing the structure of the antenna switching module and the environmental influence. By modifying the structure of the antenna switching module welding method and part of the reinforcement block, the structure was improved and the validity of the improved antenna switching module was simulated using a load test. The simulation showed that the safety factors of antenna switching module welding point and reinforced block part was enhanced 5.3 and 1.5 times compared to the existing values. These values were verified by load (181kg) test results, which was each 3.7Mpa and 64.4Mpa. The load test results were similar to the simulation results and load supporting capacity of the proposed antenna switching module was enhanced.
Keywords
Antenna; Hard rime; Load; Welding; Wind force;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 G. H. Baek, B. N. Lee, "The Role of NCW and Information․Electronic Warfare", The Science & Technology, Vol. 495, pp. 55-61, 2010.
2 S. W. Kim, "A Report on the Initial Production Quality Assurance Activities for Countermeasures Set(TLQ-201K)," Defense Agency for Technology and Quality, DTaQ-13-3619-Q, 2013.
3 S. W. Kim, H. C. Chin, J. I. Choi, "The Report on Quality Improvement for TLQ-200K/201K," Defense Agency for Technology and Quality, DTaQ-16-5044-Q, 2016.
4 J. H. Kim et el, "Experimental Performance Evaluation on V-shaped Butt Welding Using GMA Welding Double Wire Reel and Remote Control Torch Welding Technique", Journal of the Korea Academia-Industrial cooperation Society, Vol. 16, No. 2 pp. 1339-1347, 2015. DOI: http://dx.doi.org/10.5762/KAIS.2015.16.2.1339   DOI
5 G. O. Eom, "Practical Welding Engineering," gerund, pp. 2-3, 226, 321-323, 1978.
6 Y. W. Kim et el, "Stress Analysis on a Structure of Solar Tracker Subjected to Wind Load", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 21, No. 5, pp. 747-754, 2012. DOI: http://dx.doi.org/10.7735/ksmte.2012.21.5.747   DOI
7 Tsne, ANSYSWorkbench Tutorial, Seoul, pp. 20-25, 2010.
8 W. S. Joo et el, "Mechanical Design", Hakjin Books, Seoul, pp. 31-32, 2011.