Browse > Article
http://dx.doi.org/10.5762/KAIS.2015.16.12.8165

Performance Comparison between Indirect Evaporative Coolers made of Aluminum, Plastic or Plastic/Paper  

Kim, Nae-Hyun (Division of Mechanical System Engineering Incheon National University)
Publication Information
Journal of the Korea Academia-Industrial cooperation Society / v.16, no.12, 2015 , pp. 8165-8175 More about this Journal
Abstract
In Korea, summer is hot and humid, and air-conditioners consume lots of electricity. In such case, simultaneous usage of indirect evaporative cooler may reduce the sensible heat and save the electricity. In this study, heat transfer and pressure drop characteristics of indirect evaporative cooler made of aluminum, plastic, plastic/paper are investigated both under dry or wet condition. Results show that indirect evaporation efficiencies of the plastic/paper sample (38.5% ~ 51.4%) are approximately the same as those of the aluminum sample (41.9% ~ 47.5%), and are larger than those of the plastic sample (29.0% ~ 37.4%). This suggests that the plastic/paper sample could be a good substitute to the aluminum sample. However, the pressure drops across the paper channel are 92% ~ 106% larger than those across the aluminum channel. The heat transfer coefficients of the paper channel under dry condition are 15% ~ 44% larger than those of the plastic channel. The increases are 185% ~ 203% for the aluminum channel. The pressure drops of the paper channel are 34% ~ 48% larger than those of the plastic channel and 93% ~ 106% larger than those of the aluminum channel. Rigorous heat transfer analysis reveals that, for the plastic sample, 30% ~ 37% of the wet channels remain dry, whereas all the channels are wet for plastic/paper sample. For aluminum sample, the ratio is 17% ~ 23%.
Keywords
Aluminum; Indirect evaporative cooler; Performance; Paper; Plastic;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Duan, Z., Zhan, C., Zhang, X., Mustafa, M. Zhao, X., Alimohammadisgvand, B. and Hasan, A., "Indirect evaporative cooling: past, present and future potentials," Renew. Sustain. Energy Rev., Vol. 16, pp. 6823-6850, 2012.   DOI
2 Jaber, S. and Ajib, S., "Evaporative cooling as an efficient system in Mediterranean region," Appl. Therm. Eng., Vol. 31, pp. 2590-2596, 2011.   DOI
3 Caliskan, H., Dincer, I. and Hepbasil, A., "Exergoeconomic enviroecomomic and sustainability analyses of a novel air cooler," Energy Build., Vol. 55, pp. 747-756, 2012.   DOI
4 Costello, B. and Finn, D., "Thermal effectiveness characteristics of low approach indirect evaporative cooling systems in buildings," Energy Build., Vol. 39, pp. 1235-1243, 2007.   DOI
5 Maheshwari, G. P., Al-Ragom, F. and Suri, R. K., "Energy saving potential of an indirect evaporative cooler," Appl. Energy, Vol. 69, pp. 69-76, 2001.   DOI
6 Santamouris, M. and Kolokotsa, D.. "Passive cooling dissipation techniques for buildings and other structures: the state of the art," Energy Build., Vol. 57, pp. 74-94, 2013.   DOI
7 Watt, J. D. and Brown, W. K., Evaporative Air Conditioning Handbook, 3rd ed., The Fairmont Press Inc., 1997.
8 Pescod, D., "A heat exchanger for energy saving in an air conditioning plant," ASHRAE Trans., Vol. 85., Pt. 2, pp. 238-251, 1979.
9 Maclaine-Cross, I. L. and Banks, P. J., "A general theory of wet surface heat exchangers and its application to regenerative cooling," J. Heat Transfer, Vol. 103, pp. 578-585, 1981.
10 Kettleborough, C. F. and Hsieh, C. S., "The thermal performance of the wet surface plastic plate heat exchanger used in an indirect evaporative cooler," J. Heat Transfer, Vol. 105, pp. 366-373, 1983.   DOI
11 Parker, R. O. and Treybal, R. E., "The heat mass transfer characteristics of evaporative coolers," Chem. Eng. Prog. Symp. Ser. Vol 57, No. 32, pp. 138-149, 1962.
12 Hasan, A. an Siren, K., "Performance investigation of plain and finned tube evaporatively cooled heat exchangers," Appl. Therm. Eng., Vol. 23, No. 3, pp. 325-340, 2003.   DOI
13 Zalewski, W. and Gryglaszewski, P. A., "Mathematical model of heat and mass transfer processes in evaporative coolers," Chem. Eng. Process, Vol. 36, No. 4, pp. 271-280, 1977.   DOI
14 Ren, C. and Yang, H., "An analytical model for the heat and mass transfer processes in indirect evaporative cooling with parallel/counter flow configurations," Int. J. Heat Mass Transfer, Vol. 49, pp. 617-627, 2006.   DOI
15 Hasan, A., "Going below the wet-bulb temperature by indirect evaporative cooling: Analysis using a modified $\epsilon$-NTU method," Appl. Energy, Vol. 89, pp. 237-245, 2012.   DOI
16 Cui, X., Chua, K. J., Islam, M. R. and Yang, W. M., "Fundamental formulation of a modified LMTD method to study indirect evaporative heat exchangers," Energy Conservation Management, Vol. 88, pp. 372-381, 2014.   DOI
17 ASHRAE Standard 41.1, Standard Method for Temperature Measurement, ASHRAE, 1986.
18 Riangvilaikul, B. and Kumar, S., "An experimental study of a novel dew point evaporative cooling system," Energy Build., Vol. 42, pp. 637-644, 2010.   DOI
19 Zhao, X., Liu, S. and Riffat, S. B., "Comparative study of heat and mass exchanging materials for indirect evaporative cooling systems," Build. Environ., Vol. 43, No. 11, pp. 1902-1911, 2008.   DOI
20 KS M 896, Paper and plate - Measurement of water absorption rate in water, 2013.
21 ASHRAE Standard 41.2, "Standard Method for Laboratory Air-Flow Measurement, ASHRAE, 1987.
22 KS C 9306, Air Conditioner, Korean Standard Association, 2010.
23 Wang, C.-C., Webb, R. L. and Chi, K.-Y., "Data reduction for airside performance of fin-and-tube heat exchangers," Exp. Thermal Fluid Science, Vol. 21, pp. 218-226, 2000.   DOI
24 ASHRAE Standard 143, Method of test for rating indirect evaporative coolers, ASHRAE, 2007.
25 Klein S. J. and McClintock, F. A., "The description of uncertainties in a single sample experiments," Mech. Eng. Vol. 75, pp. 3-9, 1953.
26 Shah, R. K. and London, A. L., Laminar Flow in Ducts, Academic Press, 1989.
27 Gnielinski, V., "New equations for heat and mass transfer in turbulent pipe and channel flow," Int. Chem. Eng., Vol. 6, pp. 359-368, 1976.
28 Wang, C.-C., Hsieh, Y.-C. and Lin, Y.-T., "Performance of plate finned tube heat exchangers under dehumidifying conditions," J. Heat Transfer, Vol. 119, pp. 109-117, 1997.   DOI
29 Pethukov, B. S., "Heat transfer and friction in turbulent pipe flow with variable physical properties," in Advances in Heat Transfer, ed. T. F. Irvine and J. P. Hartnett, Vol. 6, Academic Press, 1970.
30 McQuiston, F. C., "Heat, mass and momentum transfer for five plate-fin-tube surfaces," ASHRAE Trans., Vol. 84, Pt. 1, pp. 266-293, 1978.