Browse > Article
http://dx.doi.org/10.5762/KAIS.2013.14.1.39

Study on Structural Strength Analysis of Automotive Seat Frame  

Kim, Key-Sun (Division of Mechanical & Automotive Engineering, Kongju University)
Kim, Sung-Soo (Division of Mechanical Engineering, Graduate School, Kongju University)
Kim, Sei-Hwan (Department of Metal Mold Design Engineering, Kongju University)
Cho, Jae-Ung (Division of Mechanical & Automotive Engineering, Kongju University)
Publication Information
Journal of the Korea Academia-Industrial cooperation Society / v.14, no.1, 2013 , pp. 39-44 More about this Journal
Abstract
Seat is the part relevant to comfortableness and safety among automotive parts directly. It also should have sufficient stiffness and strength to satisfy these conditions and ensure the safety of passenger. Automotive seat is modelled with 3D and is simulated with structural analyses about three kinds of experiments by before and after gap, side gap, before and after moment strength. As analysis result, deformation angles of $0.038^{\circ}$ and $0.04^{\circ}$ are respectively shown at before and after gap test, side gap test. Through before and after the moment strength test, maximum total deformations of 0.18946mm and 3.2482mm are respectively shown at front and rear loads. By the study result of no excessive deformation and no fracture at automotive seat frame, the sufficient rigidity and strength to guarantee the safety of passenger can be verified.
Keywords
Automotive seat; Before and after gap test; Side gap test; Before and after moment strength test; Maximum total deformation;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 H. Y. Lee, J. Y. Lim, H. T. Bom , "A Study on the Structural Analysis of Car Seat Frame", Annual Conference of KSAE, Vol. 2, pp. 170-176, June, 1997.
2 S. H. Hwang, K. N. Lee, S. D. Park and J. K. Pyun, "Driving Adaptive control System Development for Air-Bladder Seat", Journal of the Korea Society of Automotive Engineers, Vol. 4, pp. 2237-2244, June, 2007.
3 S. N. Park, "Development Trend of Car Seat Technology", Journal of the Korea Society of Automotive Engineers, Vol. 31, No. 4, pp. 26-33, August, 2009.   과학기술학회마을
4 H. J. Lee, J. H. Won, S. H. Son, S. J. Heo and J. H. Choe, "Fatigue Life Prediction Algorithm and Analysis Programming of Vehicle Components", Journal of the Korea Society of Automotive Engineers, Vol. 2, pp. 1345-1352, June, 2006.1.
5 J. M. Lim, I. S. Jang, "The Strength Analysis of Passenger Car Seat Frame", Journal of KSAE, Vol. 11, No. 6, pp. 205-212, 2003   과학기술학회마을
6 K. S. Kim, W. H. Han, Y. H. Youn, B. J. Hwang, "Design of Magnesium Seat Back Frame Using Sensitivity analysis", Annual Conference of KSAE, pp. 2122-2126, November, 2009
7 D. M. Park, K. S. Kim, D. S. Choi, S. H. Kim, W. S. Park, J. U. Cho, "A basic study on plastic suspension system for automotive seat under consideration of body pressure distribution", Journal of KAIS, Vol. 12, No. 11, pp. 4751-4755, November, 2011. DOI : http://dx.doi.org/10.5762/KAIS.2011.12.11.4751   과학기술학회마을   DOI   ScienceOn
8 J. U. Cho, K. S. Kim, D. S. Choi, S. H. Kim, S. O. Bang, C. K. Cho, "Development of plastic suspension system for automotive seat", Journal of KAIS, Vol. 12, No. 3, pp. 1091-1097, March, 2011. DOI: http://dx.doi.org/10.5762/KAIS.2011.12.3.1091   과학기술학회마을   DOI   ScienceOn