Browse > Article
http://dx.doi.org/10.6110/KJACR.2016.28.1.035

Study on Numerical Analysis of Shape and Guidevane Design for Improving a 500 PS SCR Reactor's Flow Uniformity  

Seong, Hongseok (Graduate School of Mechanical Engineering, Gyeongsang National University)
Lee, Chungho (Graduate School of Mechanical Engineering, Gyeongsang National University)
Suh, Jeongse (School of Mechanical Engineering, Gyeongsang National University. and ERI)
Publication Information
Korean Journal of Air-Conditioning and Refrigeration Engineering / v.28, no.1, 2016 , pp. 35-41 More about this Journal
Abstract
With the assumption that the performance of a catalyst is guaranteed and that the performance of an SCR reactor is influenced by the uniformity of fluid flow into the catalyst, this study carried out a numerical analysis of flow uniformity, which is an important design factor in SCR reactors. CFD was used to grasp flow uniformity and flow characteristics inside the SCR reactor. As for the flow uniformity, analysis was carried out on the velocity and direction of the fluid flowing into the front of the first SCR reactor. Numerical analysis was carried out in terms of the area ratios of the mixing evaporator to the catalyst for 500 PS SCR, 1 : 1.9, 1 : 3.1, 1 : 4.5, and 1 : 7.0. The results showed that the larger the area ratio, the smaller the flow uniformity. On the basis of these results, the flow uniformity of the modified SCR reactor is 77%. A guidevane was installed to improve flow uniformity, and attempts were made to grasp the flow uniformity based on the shape of the guide vane. The shape of the guide vane was cylindrical, and numerical analysis was carried out for cases with two cylinders and three cylinders. As a result of the numerical analysis, it was found that while there was no great difference between 82.7% with two cylinders and 81.7% with three cylinders, the effects of the installation of the guide vane on the improvement of flow uniformity were indisputable.
Keywords
CFD; Area ratio; Flow uniformity; SCR; Guidevane;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Baek, S. M., Zhong, Y., Nam, J. H., Chung, J. D., H. Hong, 2013, Computational Fluid Dynamics Model for Solar Thermal Storage Tanks with Helical Jacket Heater and Upper Spiral Coil Heater, Transactions of the Korean Society of Mechanical Engineers-B, Vol. 37, No. 4, pp. 331-341.   DOI
2 Lee, I., Lee, S., Kim, K., and Heo, J., 2004, Improvement of CFD accuracy using wind tunnel and PIV system, The Korean Society For Bio-Environment Control, pp. 204-207.
3 Schar, C., Onder, C., Geering, H., and Elsener, M., 2003, Control of a Urea SCR Catalytic Converter System for a Mobile Heavy Duty Diesel Engine, SAE Technical Paper 2003-01-0776.
4 Azzara, A., Rutherford, D., and Wang, H., 2014, Feasibility of IMO Annex VI Tier III implementation using Selective Catalytic Reduction, The International Council on Clean Transportation.
5 Yi, C. S., Lee, Y. H., Jeong, H. M., and Chung, H. C., 2007, Numerical Analysis on the Pressure Characteristic and Flow Uniformity in a Ceramic Catalytic Converter for Motorcycle, Trans. Korean Soc. Mech. Eng. B, Vol. 31, No. 4, pp. 376-383.   DOI
6 Weltens, H., Bressler, H., Terres, F., Neumaier, H. and Rammoser, D., 1993, Optimisation of Catalytic Converter Gas Flow Distribution by CFD Prediction, SAE Technical paper, 930780.
7 Mokhtari, S., Kudriavtsev, V. V., and Danna, M., 1997, flow uniformity and pressure variation in multi-outlet flow distribution pipes, PVP-Vol.355, Advances in analytical, Experimental and Computational Technologies in Fluids, Structures, Transients and Natural Hazards, ASME, pp. 113-122.
8 Song, M., Kang, S., Lee, S., Kang, Y., and Cho, Y., 2013, A Numerical study on the NOx Reduction Rate Depending on the Flow Uniformity Index of NH3 in front of the Catalytic Converter, KSAE, pp. 354-360.
9 Seo, J.-W., Lee, K.-I., Oh, J.-T., Choi, Y.-H., Lee, J.- H., and Park, J.-I., 2008, The Study on the Effects of Mixer Configurations on Fluid Mixing Characteristics in SCR Systems, Trans. Korean Soc. Mech. Eng. B, Vol. 16, No. 6, pp. 192-199.