Browse > Article
http://dx.doi.org/10.6110/KJACR.2015.27.11.559

The Effect of Header and Channel Angle Variation on Two-Phase Flow Distribution at Multiple Junctions  

Lee, Jun Kyoung (Department of Mechanical Engineering, Kyungnam University)
Publication Information
Korean Journal of Air-Conditioning and Refrigeration Engineering / v.27, no.11, 2015 , pp. 559-566 More about this Journal
Abstract
The main objective of this work is to experimentally investigate the effect of angle variation on the distribution of two-phase flow at header-channel junctions. The cross-sections of the header and the channels were fixed at $16mm{\times}16mm$ and $12mm{\times}1.8mm$, respectively. Air and water were used as the test fluids. Four different header-channel positions were tested : Vertical header with Horizontal channels (case VM-HC), Horizontal header with Horizontal channels (case HM-HC), Horizontal header with Vertical Downward channels (case HM-VDC), and Horizontal header with Vertical Upward channels (case HM-VUC). In all cases, liquid flow distribution tended to decrease gradually in the upstream header region. However, in the downstream region, different trends could be seen. The reason for these different tendencies were identified by flow visualization in each case. The standard deviations for the liquid and gas flow distribution in each case were calculated, and the case of VM-HC had the lowest values compared to other cases because of the symmetrically distributed liquid film and strong flow recirculation near the end plate.
Keywords
Flow distribution; Two-phase; Angle variation; Header;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Lee, S. Y., 2006, Flow distribution behavior in condensers and evaporators, Proceedings of the 13th Int. Heat Transfer Conference, Sydney, Australia.
2 Lee, J. K., 2005, An Experimental Study on Twophase Flow Distribution at Header-Channel Junctions, Ph.D. Dissertation, Department of Mechanical Engineering, KAIST.
3 Webb, R. L. and Chung, K., 2004, Two-phase flow distribution in tubes of parallel flow heat exchangers, Heat Transfer Engineering, Vol. 26, pp. 3-18.
4 Hrnjak, P., 2004, Developing Adiabatic Two Phase Flow in Headers-Distribution Issue in Parallel Flow Microchannel Heat Exchangers, Heat Transfer Engineering, Vol. 25, pp. 61-68.
5 Dario, E. R., Tadrist, L., and Passos, J. C., 2013, Review on two-phase flow distribution in parallel channels with macro and micro hydraulic diameters : Main results, analyses, trends, Applied Thermal Engineering, Vol. 59, pp. 316-335.   DOI
6 Lee, J. K., 2009, Two-phase flow behavior inside a header connected to multiple parallel channels, Experimental Thermal and Fluid Science, Vol. 33, pp. 195-202.   DOI
7 Kim, N. H. and Han, S. P., 2008, Distribution of airwater annular flow in a header of a parallel flow heat exchanger, International Journal of Heat and Mass Transfer, Vol. 51, pp. 977-992.   DOI
8 Cho, H. and Cho, K., 2004, Mass flow rate distribution and phase separation of R-22 in multi-microchannel tubes under adiabatic condition, Nanoscale and Microscale Thermophysical Engineering, Vol. 8, pp. 129-139.   DOI
9 Vist, S. and Pettersen, J., 2004, Two-phase Flow Distribution in Compact Heat Exchanger Manifolds, Experimental Thermal and Fluid Science, Vol. 28, pp. 209-215.   DOI
10 Marchitto, A., Devia, F., Fossa, M., Guclielmini, G., and Schenone, C., 2008, Experiments on two-phase flow distribution inside parallel channels of compact heat exchangers, International Journal of Multiphase Flow Vol. 34, pp. 128-144.   DOI
11 Ahmad, M., Berthoud, G., and Mercier, P., 2009, General characteristics of two-phase flow distribution in a compact heat exchanger, International Journal of Heat and Mass Transfer, Vol. 52, pp. 442-450.   DOI
12 Lee, J. K. and Lee, S. Y., 2004, Disbution of twophase annular flow at header-channel junctions, Experimental Thermal and Fluid Science, Vol. 28, pp. 217-222.   DOI
13 Troniewski, L. and Ulbrich, R., 1984, Two-phase gas liquid flow in rectangular channels, Chem. Eng. Sci., Vol. 39, pp. 751-765.   DOI
14 Lee, J. K., 2010, Optimum Channel Intrusion Depth for Uniform Flow Distribution at Header-Channel Junctions, J. of Mech. Sci. and Tech., Vol. 24, pp. 1011-1017.   DOI