1 |
Huff, H., Hwang, Y., and Radermacher, R., 2002, Options for a two-stage transcritical cycle, 5th IIR-Gustav Lorentzen on Natural Working Fluids Conference 2002, Guangzhou, China.
|
2 |
Baek, J., Groll, E., and Lawless, P., 2002, Effect of pressure ratios across compressors on th performance of the transcritical cycle with two-stage compression and inter-cooling, International Refrigeration and Air Conditioning Conference, Purdue University, Indiana, U.S.A.
|
3 |
Cavallini, A., Cecchinato, L., Corradi, M., Fornasieri, E. and Zilio, C., 2005, Two-stage transcritical carbon dioxide cycle optimisation:A theoretical and experimental analysis, Int. Journal of Refrigeration, Vol. 28, No. 8, pp. 1274- 1283.
DOI
|
4 |
Agrawal, N., Bhattacharyya, S., and Sarkar, J., 2007, Optimization of two-stage transcritical carbon dioxide heat pump cycles, Int. Journal of Thermal Science, Vol. 46, No. 2, pp. 180- 187.
DOI
|
5 |
Ryu, C., Lee, H., Kim, Y., Cho, H., and Cho, S., 2006, Simulation study on the performance improvement of a system applying a twostage phase-separate cycle, Korea Journal of Air-conditioning and Refrigeration, Vol. 18, No. 8, pp. 613-687.
|
6 |
Rice, C. and Fisher, S., 1983 A steady state computer design model for air to air heat pump, Department of Energy, division of building equipment, ORNL.
|
7 |
Pitla, S. S., Groll, E. A., and Ramadhyani, S., 2002, New correlation to predict the heat transfer coefficient during in-tube cooling of turbulent supercritical , Int. Journal of Refrigeration, Vol. 25, No. 7, pp. 887-895.
DOI
|
8 |
Thome, J. R., Hajal, J. E., and Cavallini, A, 2003, Condensation in horizontal tubes, part 2 :new heat transfer model based on flow regimes, Int. Journal of Heat and Mass Transfer, Vol. 46, No. 18, pp. 3356-3387.
|
9 |
Winterton, R. H. S., 1998, Where did the Dittus and Boelter equation come from?, Int. Journal of Heat and Mass Transfer, Vol. 41, No. 4, pp. 809-810.
DOI
|
10 |
Cheng, L., Ribatski, G., Wojtan, L., and Thome, J. R., 2008, New prediction method for evaporation inside tubes:Part II-An updated general flow boiling heat transfer model based on flow patterns, Int. Journal of Heat and Mass Transfer, Vol. 51, No. 1-2, pp. 125-135.
DOI
|
11 |
Wang, C. C. and Chang, Y. J., 1997, A generalized heat transfer correlation for louver fin geometry, Int. Journal of Heat and Mass Transfer, Vol. 40, No. 3, pp. 533-544.
DOI
|
12 |
Churchill, S. W., 1977, Friction-Factor Equation Span all Fluid Flow Regimes, Chemical Engineering, Vol. 7, pp. 91-92.
|
13 |
Friedel, L., 1979, Improved Friction Pressure Drop Correlations for Horizontal and Vertical Two Phase Pipe Flow, European Two-Phase Flow Group Meeting, Ispra, Italy, p. E2.
|
14 |
Petukhov, B. S., 1970, Advances in Heat Transfer, Vol. 6, Academic Press, New York.
|
15 |
Cheng, L., Ribatski, G., Quiben, J. M., and Thome, J. R., 2008, New prediction methods for evaporation inside tubes:Part I-A two-phase flow pattern map and a flow pattern based phenomenological model for twophase flow frictional pressure drops, Int. Journal of Heat and Mass Transfer, Vol. 51, No. 1-2, pp. 111-124.
DOI
|
16 |
Wang, C. C., Hsu, K. C., Lin, Y. T., and Chang, Y. J., 2000, A generalized friction correlation for louver fin geometry, Int. Journal of Heat and Mass Transfer, Vol. 43, No. 12, pp. 2237- 2243.
DOI
|
17 |
Hwang, Y. and Kim, O., 2007, Experimental study on the flow through electronic expansion valves, Proceedings of the SAREK, Korea, pp. 1237-1241.
|
18 |
ASHRAE Standard 116, 2010, Methods of Testing for Seasonal Efficiency of Unitary Airconditioner and Heat Pumps, ASHRAE, Atlanta, GA, USA.
|