Browse > Article

Experimental Study on Film Boiling Heat Transfer of Spray Cooling for Inclined heat transfer Surface  

Kim, Yeung-Chan (School of Mechanical Engineering, Andong National University)
Publication Information
Korean Journal of Air-Conditioning and Refrigeration Engineering / v.22, no.1, 2010 , pp. 33-39 More about this Journal
Abstract
The film boiling heat transfer was experimentally investigated for the water sprays impacting on an inclined hot surface. Full cone spray nozzles were employed for the spray cooling experiment, and experiments were made for different inclination angles of $\theta=0^{\circ}$, $15^{\circ}$, $30^{\circ}$ and $45^{\circ}$. The experimental results show that, in the downstream region of the inclined hot surface, increasing the inclination angle increases the local heat flux slowly because of increasing the number of rebound droplets. However, the inclination angle of heat transfer surface had no remarkable effect on the local heat flux of spray cooling under the present test conditions.
Keywords
Spray cooling; Film boiling; Heat transfer; Inclined surface; Cooling technique; Full cone spray;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Bar-Cohen, A., 1993, Thermal management of electronic Components with Dielectric Liquids, JSME Int. Journal, Series B-36, pp. 1-25.
2 Beck, J. V., 1970, Nonlinear Estimation Applied to the Nonlinear Inverse Heat Conduction Problem, Int. J. of Heat and Mass Transfer, Vol. 13, pp. 703-716.   DOI   ScienceOn
3 Muller, H. and Jescher, R., 1973, Investigation of the Heat Transfer in a Simulated Secondary Cooling Zone in the Continuous Casting Process, Arch Eisenhuttenwes, Vol. 44, No. 8, pp. 589-594.
4 Kim, Y. C. and Yun, S. M., 2006, Study on Correlation of Droplet Flow rate and Film Boiling Heat Transfer in Spray Cooling, Trans. of the KSME(B), Vol. 31, No. 4, pp. 335-340.
5 Kim, Y. C., Nishio, S. and Ohkubo, H., 1994, Spray Cooling with Formation of Liquid Film Flow :Distribution of Heat Transfer Coefficient in High Temperature Region, Trans. of the JSME(B), Vol. 60, No. 574, pp. 2158-2164.   DOI
6 Kim, Y. C., Nishio, S. and Ohkubo, H., 1996, Heat Transfer in High Temperature Region of Spray Cooling Interacting with Liquid Film Flow, Trans. of the JSME(B), Vol. 62, Vo. 597, pp. 1991-1997.   DOI
7 Bar-Cohen, A., 1993, Thermal management of electronic Components with Dielectric Liquids, JSME Int. Journal, Series B-36, pp. 1-25.
8 Bolle, L. and Moureau, J. C., 1977, Spray Cooling of Hot Surface, Two-Phase Flow and Heat Transfer Proc. NATO Advanced Study Institude, Vol. 3, pp. 1327-1346.
9 Ohkubo, H. and Nishio, S., 1993, Study on Mist Cooling for Heat Treatment of Metals, J. Materials Processing and Manufacturing Science, Vol. 2, pp. 14-27
10 Kim, Y. C. 2007, Study on Boiling Heat Transfer of FC-77 in Spray Cooling, Journal of ILASS-KOREA, Vol. 12, No. 4, pp. 179-184.
11 Kim, Y. C., Riu, K. J., Seo, T. W., 2000, Measurements of Heat Transfer Distribution in Spray Cooling of Hot Steel Plate, Korean J. of Air-Conditioning and Refrigeration Engineering, Vol. 12-10, pp. 886-893.
12 Wadsworth, D. C. and Mudawar, I., 1990 Cooling of Multi-chip Electronic Module by Means of Confined Two-Dimensional Jets of Dielectric Liquid, ASME J. of Heat Transfer, Vol. 112, pp. 891-898.   DOI
13 Toda, S., 1974, A Study of Mist Cooling (2nd Report:Theory of Mist Cooling and its Fundamental Experiments), Heat Transfer Japanese Research, Vol. 3, pp. 1-44.
14 Kim, Y. C., 2005, Film Boiling Heat Transfer Model of Spray Cooling Focusing on Rebound Motion of Droplets, Trans. of the KSME(B), Vol. 29, No. 2, pp. 287-293.
15 Kim, Y. C. and Yun, S. M., 2006, Study on Film Boiling Heat Transfer of Spray Cooling in Air-Water Full Cone Spray System, Trans. of the KSME(B), Vol. 30, No. 12, pp. 1236-1242.
16 Toda, S., 1972, A Study of Mist Cooling (1st Report:Investigation of Mist Cooling), Heat Transfer Japanese Research, Vol. 1, pp. 39-52.
17 Ohkubo, H. and Nishio, S., 1990, Study on Accurate Prediction of Heat Transfer Characters of Mist Cooling, JSME International Journal, Vol. 33-2, pp. 326-33.
18 Nishio, S. and Kim, Y. C., 1998, Heat Transfer of Dilute Spray Impinging on Hot Surface, Int. J. of Heat and Mass Transfer, Vol. 41, pp. 4113-4119.   DOI   ScienceOn