Browse > Article

The Characteristics of Thermal Hydraulic Performance for Micro Plate Heat Exchanger with Straight channel  

Kim, Yoon-Ho (Graduate School of Mechanical Engineering, Korea University)
Lee, Kyu-Jung (Department of Mechanical Engineering, Korea University)
Seo, Jang-Won (Graduate School of Mechanical Engineering, Korea University)
Jeon, Seung-Won (Graduate School of Mechanical Engineering, Korea University)
Publication Information
Korean Journal of Air-Conditioning and Refrigeration Engineering / v.20, no.11, 2008 , pp. 767-774 More about this Journal
Abstract
This paper presented the heat transfer and pressure drop characteristics for micro plate heat exchanger with straight channel. The metal sheets for straight channel are manufactured by chemical etching and fabricated micro plate heat exchangers by using the vacuum brazing of bonding technology. The performance experiments are performed within the Reynolds numbers range of 15$\sim$250 under the same flow rate conditions for hot and cold sides. The inlet temperature of hot and cold water are conducted in the range of $30^{\circ}C{\sim}50^{\circ}C$ and $15^{\circ}C{\sim}25^{\circ}C$, respectively. Heat transfer rate and pressure drop are evaluated by the Reynolds numbers and mass flow rates as the inlet temperature variations of the hot and cold sides. Correlations of Nusselt number and friction factor are suggested for micro plate heat exchanger with straight channel using the results of performance experiment.
Keywords
Micro plate heat exchanger; Straight channel; Nusselt number; Friction factor; Correlation;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Rachkovskij, D. A., Kussul, E. M. and Talayev, S. A., 1998, Heat exchange in short microtubes and micro heat exchangers with low hydraulic losses, Microsystem Technologies, Vol. 4, No. 3, pp. 151-158   DOI
2 Sieder, E. N. and Tate, G. E., 1936, Heat transfer and pressure drop of liquids in tubes, Industrial and Engineering Chemistry, Vol. 28, No. 12, pp. 1429-1435   DOI
3 Manglik, R. M., 1996, Plate heat exchangers for process industry applications : Enhanced thermal-hydraulic characteristics of chevron plates, Process, Enhanced and Multiphase Heat Transfer, R. M. Manglik and A. D. Kraus, eds., Begell House, New York, pp. 267-276
4 Kakaç, S., Shah, R. K. and Aung, W., 1987, Handbook of single-phase convective heat transfer, John Wiley and Sons, New York
5 Harris, C., Kelly, K. and Wang, T., 2002, Fabrication, modeling and testing of Micro-Cross-Flow Heat Exchangers, Journal of MEMS, Vol. 11, No. 6, pp. 726-735   DOI   ScienceOn
6 Kang, S. W. and Tseng, S. C., 2007, Analysis of effectiveness and pressure drop in micro cross-flow heat exchanger, Applied Thermal Engineering, Vol. 27, No. 5-6, pp. 877-885   DOI   ScienceOn
7 Shih, F. S., 1967, Laminar flow in axisymmetric conduits by a rational approach, Can. J. Chem. Eng, Vol. 48, pp. 285-294
8 NIST Technical Note 1297, 1994
9 Kays, W. M. and London, A. L., 1964, Compact Heat Exchangers, 2nd Ed. McGraw- Hill, New York
10 Muley, A. and Manglik, R. M., 1999, Experimental study of turbulent flow heat transfer and pressure drop in a plate heat exchanger with chevron plates, ASME J. Heat Transfer, Vol. 121, No. 1, pp. 110-121   DOI   ScienceOn
11 Seo, J. W., Lee, K. J., Kim, Y. H. and Moom, C. E., 2008, Experiments on heat transfer characterictics and pressure drop in microchannel plate heat exchangers with 3D shapes, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 20, No. 3, pp. 213-219   과학기술학회마을
12 ASME PTC 19.1, 1998
13 Dittus, F. W. and Boelter, L. M. K., 1985, Heat transfer in automobile radiators of the tubular type, International Communications in Heat and Mass Transfer, Vol. 12, No. 1, pp. 3-22   DOI   ScienceOn
14 Gromoll, B., 1998, Micro cooling systems for high density packaging, Revue Generale de Thermique, Vol. 37, No. 9, pp. 781-787   DOI   ScienceOn