Browse > Article

Flow Characteristics of a Laminar Rivulet Down an Inclined Surface  

Kim, Byong-Joo (Department of Mechanical and System Design Engineering, Hongik University)
Publication Information
Korean Journal of Air-Conditioning and Refrigeration Engineering / v.17, no.11, 2005 , pp. 1035-1042 More about this Journal
Abstract
In the present study, the principle of minimum energy is employed to configure the shape of rivulet flowing down an inclined surface. The profile of laminar rivulet is determined by numerical integration. The maximum center thickness, which corresponds to the minimum thickness of falling film, is found to exist regardless of liquid flow rate and is compared with the analytical and experimental data. At small liquid flow rate the center thickness of rivulet and its width increase almost linearly with flow rate. Once the center thickness of rivulet becomes very close to its maximum value, its growth rate retards abruptly. However the width of rivulet increases proportionally to the liquid flow rate and most part of its free surface is as flat as that of stable film. The growth rate of rivulet thickness with respect to liquid flow rate becomes larger at bigger contact angle. The width of rivulet increases rapidly with its flow rate especially at small contact angle, As the liquid-vapor interfacial shear stress increases, the center thickness of rivulet decreases with its flow rate, which is remarkable at small contact angle. However the effect of interfacial shear stress on the width of rivulet is almost negligible.
Keywords
Rivulet; Center thickness; Minimum energy; Contact angle; Interfacial shear stress;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Doniec, A., 1991, Laminar flow of a liquid rivulet down a vertical solid surface, Can. J. Chem. Eng., Vol. 69, pp.198-202
2 Kim, B. J. and Choi, S. H., 1999, Study on the wetting characteristics of rivulet, '99 Summer Conference of SAREK, pp.936-940
3 Hartley, D. E. and Murgatroyd, W., 1964, Criteria for the break-up of thin liquid layers flowing isothermally over solid surfaces, Int. J. Heat Mass Transfer, Vol. 77, pp. 1003-1015
4 Lance, G. N., 1960, Numerical methods for high speed computer, Iliffe & Sons, pp. 5457
5 Hildebrand, F. B., 1965, Methods of Applied Mathematics, 2nd ed., Prentice-Hall
6 Munakata, T., Watanabe, K. and Miyashita, K., 1975, Minimum wetting rate on wetted-wall column, J. Chem. Engng. Japan, Vol. 8, p.440
7 Bankoff, S. G., 1971, Minimum thickness of a draining film, Int. J. Heat Mass Transfer, Vol. 14, pp.2143-2146   DOI   ScienceOn
8 Ponter, A. B. and Boyes, A. P., 1972, The rupture of isothermal vertical liquid films, J. Chem. Engng. Japan, Vol. 5, p. 80   DOI
9 Hobler, T. and Czajka, J., 1968, Minimal wetting of flat surface, Chemia Stosow, Vol. 2B, pp. 169-186
10 Nusselt, W., 1916, Die Oberflachenkondensation des Wasserdampfes, Z. Ver. Dtsch. Ing., Vol. 60, pp. 541-569
11 Towell, G. D. and Rothfeld, L. B., 1966, Hydrodynamics of rivulet flow, A.I.Ch.E. Journal, Vol. 12, pp. 972-980   DOI
12 Mikielewicz, J. and Moszynski, J. R., 1976, Minimum thickness of a liquid film flowing vertically down a solid surface, Int. J. Heat Mass Transfer, Vol. 19, pp.771-776   DOI   ScienceOn
13 Doniec, A., 1988, Flow of a laminar film down a vertical surface, Chem. Engng. Sci., Vol. 43, pp.847-854   DOI   ScienceOn
14 Hughies, D. T. and Bott, T. R., 1998, Minimum thickness of a liquid film flowing down a vertical tube, Int. J. Heat Mass Transfer, Vol. 41, pp.253-260   DOI   ScienceOn
15 Batchelor, G. K., 1983, An introduction to fluid dynamics, Cambrige University Press, New York, pp.63-70