1 |
F. Bi, L. Peng, P. Yi, X. Lai, Multilayered Zr-C/a-C film on stainless steel 316L as bipolar plates for proton exchange membrane fuel cells, J. Power Sources, 314 (2016) 58-65.
DOI
|
2 |
P. Zhang, C. Hao, Y. Han, Electrochemical behavior and surface conductivity of NbC modified Ti bipolar plate for proton exchange membrane fuel cell, Surf. Coat. Technol., 397 (2020) 126064.
DOI
|
3 |
Y. Gou, H. Chen, R. Li, J. Geng, Z. Shao, Nb-Cr-C coated titanium as bipolar plates for proton exchange membrane fuel cells, J. Power Sources, 520 (2022) 230797.
DOI
|
4 |
W. Yan, Y. Zhang, Corrosion behavior and interfacial conductivity of amorphous hydrogenated carbon and titanium carbide composite (a-C: H/TiC) films prepared on titanium bipolar plates in PEMFCs, Diamond Relat. Mater., 120 (2021) 108628.
DOI
|
5 |
J. Shi, P. Zhang, Y. Han, H. Wang, X. Wang, Y. Yu, J. Sun, Investigation on electrochemical behavior and surface conductivity of titanium carbide modified Ti bipolar plate of PEMFC, Int. J. Hydrog. Energy, 45 (2020) 10050-10058.
DOI
|
6 |
I. Alaefour, S. Shahgaldi, J. Zhao, X. Li, Synthesis and ex-situ characterizations of diamond-like carbon coatings for metallic bipolar plates in PEM fuel cells, Int. J. Hydrog. Energy, 46 (2021) 11059-11070.
DOI
|
7 |
J. Jin, Z. He, X. Zhao, Formation of a protective TiN layer by liquid phase plasma electrolytic nitridation on Ti-6Al-4V bipolar plates for PEMFC, Int. J. Hydrog. Energy, 45 (2020) 12489-12500.
DOI
|
8 |
W. Li, L. Liu, Z. Li, Y. Wang, H. Li, J. Lei, Corrosion resistance and conductivity of amorphous carbon coated SS316L and TA2 bipolar plates in proton-exchange membrane fuel cells, Diamond Relat. Mater., 118 (2021) 108503.
DOI
|
9 |
P. Yi, D. Zhang, D. Qiu, L. Peng, X. Lai, Carbon-based coatings for metallic bipolar plates used in proton exchange membrane fuel cells, Int. J. Hydrog. Energy, 44 (2019) 6813-6843.
DOI
|
10 |
J. Wang, L. Min, F. Fang, W. Zhang, Y. Wang, Electrodeposition of graphene nano-thick coating for highly enhanced performance of titanium bipolar plates in fuel cells, Int. J. Hydrog. Energy, 44 (2019) 16909-16917.
DOI
|
11 |
A. Shenhar, I. Gotman, S. Radin,P. Ducheyne, E.Y. Gutmanas, Titanium nitride coatings on surgical titanium alloys produced by a powder immersion reaction assisted coating method: residual stresses and fretting behavior, Surf. Coat. Technol., 126 (2000) 210-218.
DOI
|
12 |
J. G. G. Rodriguez, M. A. L. Garcia, M. E. Nicho, R. C. Silva, M. Casales, E. Valenzuela, Improvement on the corrosion protection of conductive polymers in pemfc environments by adhesives, J Power Sources, 168 (2007) 184-190.
DOI
|
13 |
P. Mandal, U. K. Chanda, S. Roy, A review of corrosion resistance method on stainless steel bipolar plate, Mater. Today: Proc., 5 (2018) 17852-17856.
DOI
|
14 |
C. Shanmugham, N. Rajen, Corrosion resistance of poly p-phenylenediamine conducting polymer coated 316L SS bipolar plates for Proton Exchange Membrane Fuel Cells, Progress in Organic Coatings, 89 (2015) 42-49.
DOI
|
15 |
E. Valenzuela, Improvement on the corrosion protection of conductive polymers in pemfc environments by adhesives, J. Power Sources, 168 (2007) 184-190.
DOI
|
16 |
C.Shanmugham, N.Rajen, Corrosion resistance of poly p-phenylenediamine conducting polymer coated 316L SS bipolar plates for proton exchange membrane fuel cells, Prog. Org. Coat., 89 (2015) 42-49.
DOI
|
17 |
J. Bi, J. Yang, X. Liu, D. Wang, Z.Yang, G. Liu, X. Wang, Development and evaluation of nitride coated titanium bipolar plates for PEM fuel cells, Int. J. Hydrog. Energy, 46 (2021) 1144-1154.
DOI
|
18 |
J. Jin, J. Zhang, M. Hu, X. Li, Investigation of high potential corrosion protection with titanium carbonitride coating on 316L stainless steel bipolar plates, Corros. Sci., 191 (2021) 109757.
DOI
|
19 |
P. C. Zhang, Y. T. Han, J. F. Shi, T. Li, H. Y.Wang, X. Y. Wang, J. C. Sun, ZrC Coating Modified Ti Bipolar Plate for Proton Exchange Membrane Fuel Cell, Fuel Cells, 20 (2020) 540-546.
DOI
|
20 |
K. Feng, Y. Shen, J. Mai, D. Liu, X. Cai, An investigation into nickel implanted 316L stainless steel as a bipolar plate for PEM fuel cel, J. Power Sources, 182 (2008) 145-152.
DOI
|
21 |
S. B. Jadi, A. E. Jaouhari, A. Aouzal, A. E. Guerraf, M. Bouabdallaoui, R. Wang, E. A. Bazzaoui, M. Bazzaoui, Electropolymerization and corrosion resistance of polypyrrole on nickel bipolar plate for PEM fuel cell application, Mater. Today: Proc., 22 (2020) 52-56.
DOI
|
22 |
Y. Song, C. Zhang, C. Ling, M. Han, R. Yong, D. Sun, J. Chen, Review on current research of materials, fabrication and application for bipolar plate in proton exchange membrane fuel cell, Int. J. Hydrog. Energy, 45 (2020) 29832-29847.
DOI
|
23 |
S. H. Wang, J. Peng, W.B. Lui, Surface modification and development of titanium bipolar plates for PEM fuel cells, J. Power Sources, 160 (2006) 485-489.
DOI
|
24 |
S. P. Mani, P. Agilan, M. Kalaiarasan, K. Rvichandran, N. Rajendran, Y. Meng, Effect of multilayer CrN/CrAlN coating on the corrosion and contact resistance behavior of 316L SS bipolar plate for high temperature proton exchange membrane fuel cell, J. Mater. Sci. Technol., 97 (2022) 134-146.
DOI
|
25 |
W. Yoon, X. Huang, P. Fazzino, K.L. Reifsnider, M.A. Akkaoui, Evaluation of coated metallic bipolar plates for polymer electrolyte membrane fuel cells, J. Power Sources, 179 (2008) 265-273.
DOI
|
26 |
N. F. Asri, T. Husaini, A. B. Sulong, E. H. Majlan, W. R. W. Daud, Coating of stainless steel and titanium bipolar plates for anticorrosion in PEMFC: A review, Int. J. Hydrog. Energy, 42 (2017) 9135-9148.
DOI
|
27 |
M. P. Brady, K. Weisbrod, I. Paulauskas, R. A. Buchanan, K. L. More, H. Wang, M. Wilson, F. Garzon, L. R. Walke, Preferential thermal nitridation to form pin-hole free Cr-nitride to protect proton exchange membrane fuel cell metallic bipolar plates, Scr. Mater., 50 (2004) 1017-1022.
DOI
|
28 |
H. Wang, M.P. Brady, G. Teeter, J.A. Turner, Thermally nitrided stainless steels for polymer electrolyte membrane fuel cell bipolar plates Part 1: Model Ni-50Cr and austenitic 349TM alloys, J. Power Sources, 138 (2004) 86-93.
DOI
|
29 |
A. Shenhar, I. Gotman, E.Y. Gutmanas, P. Ducheyn, Surface modification of titanium alloy orthopaedic implants via novel powder immersion reaction assisted coating nitriding method, Mater. Sci. Eng., A268 (1999) 40-46.
|
30 |
P. Yi, C. Dong, T. Zhang, K. Xiao, Y. Ji, J. Wu, X. Li, Effect of plasma electrolytic nitriding on the corrosion behavior and interfacial contact resistance of titanium in the cathode environment of proton-exchange membrane fuel cells, J. Power Sources, 418 (2019) 42-49.
DOI
|
31 |
P. Yi, L. Peng, T. Zhou, H. Wu, X. Lai, Cr-N-C multilayer film on 316L stainless steel as bipolar plates for proton exchange membrane fuel cells using closed field unbalanced magnetron sputter ion plating, Int. J. Hydrogen Energy, 38 (2013) 1535-1543.
DOI
|
32 |
S. H. Lee, T. H. Yang, S. H. Hyun, Y. S. Yoo, Corrosion behavior of pre-oxidized and thermally nitrided stainless steel for polymer electrolyte membrane fuel cell bipolar plates, Corros. Sci., 58 (2012) 79-85.
DOI
|
33 |
Y. Wang, S. Zhang, Z. Lu, L. Wang, W. Li, Preparation and performances of electrically conductive Nb-doped TiO2 coatings for 316 stainless steel bipolar plates of proton-exchange membrane fuel cells, Corros. Sci., 142 (2018) 249-257.
DOI
|