Browse > Article
http://dx.doi.org/10.5695/JKISE.2019.52.2.62

TEM Analysis on Oxide Films of Al1050 and Al7075 Exposed to 24-month Atmospheric Conditions  

Kim, Dae-Geon (School of Mechanical Engineering, Pusan National University)
Kim, Ga-Rim (School of Mechanical Engineering, Pusan National University)
Choi, Wonjun (School of Mechanical Engineering, Pusan National University)
Bahn, Chi Bum (School of Mechanical Engineering, Pusan National University)
Publication Information
Journal of the Korean institute of surface engineering / v.52, no.2, 2019 , pp. 62-71 More about this Journal
Abstract
Al1050 and Al7075 alloy specimens were exposed to atmospheric conditions for 24 months and analyzed by Transmission Electron Microscopy to characterize their corrosion behavior and oxide film characteristics, especially focusing on intergranular corrosion or oxidation. In general, the intergranular oxygen penetration depth of Al1050 was deeper than Al7075. Since O and Si signals were overlapped at the oxidized grain boundaries of Al1050 and Mg is not included in Al1050, it is concluded that Si segregated along the grain boundaries directly impacts on the intergranular corrosion of Al1050. Cr-Si or Mg-Si intermetallic particles were not observed along the grain boundaries of Al7050, but Mg-Si particle was barely observed in the matrix. 10-nm size Mg-Zn particles were also found all over the matrix. Mg was mainly observed along the oxidized grain boundary of Al7075, but Si was not detected due to the Mg-Si particle formation in the matrix and relatively low concentration of Si in Al7075. Therefore, it is thought that Mg plays an important role in the intergranular corrosion of Al7075 under atmospheric corrosion conditions.
Keywords
Aluminum alloys; Atmospheric corrosion; Intergranular corrosion; TEM;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 T. F. Otero, A. Porro, A. S. Elola, Prediction of Pitting Probability on 1050 Aluminum in Environmental Conditions, Corrosion 48 (1992) 785-791.   DOI
2 S. Sun, Q. Zheng, D. Li, J. Wen, Long-term atmospheric corrosion behaviour of aluminium alloys 2024 and 7075 in urban, coastal and industrial environments, Corros. Sci. 51 (2009) 719-727.   DOI
3 T. Zhang, Y. He, R. Cui, T. An, Long-Term Atmospheric Corrosion of Aluminum Alloy 2024-T4 in a Coastal Environment, J. Mater. Eng. Perform. 24 (2015) 2764-2773.   DOI
4 X. K. Yang, L. W. Zhang, S. Y. Zhang, M. Liu, K. Zhou, X. L. Mu, Properties degradation and atmospheric corrosion mechanism of 6061 aluminum alloy in industrial and marine atmosphere environments, Mater. Corros. 68 (2017) 529-535.   DOI
5 M. Poltavtseva, A. Heyn, E. Boese, Long term corrosion behavior of clad aluminum materials under different atmospheric conditions, Mater. Corros. 64 (2013) 723-730.   DOI
6 J. Ryl, J. Wysocka, M. Jarzynka, A. Zielinski, J. Orlikowski, K. Darowicki, Effect of native airformed oxidation on the corrosion behavior of AA 7075 aluminum alloys, Corros. Sci. 87 (2014) 150-155.   DOI
7 Y. S. Kim, H. K. Lim, J. J. Kim, W. S. Hwang, and Y. S. Park, Corrosion cost and corrosion map of Korea-Based on the data from 2005 to 2010, Corros. Sci. Tech. 10 (2011) 52-59.   DOI
8 김선규, 이찬형, 반치범. 대기 부식에 의해 생성된 Al1050 및 Al7075 알루미늄 합금 산화막에 대한 투과전자현미경 분석. 한국표면공학회지, 50(6), (2017) 447-454.   DOI
9 S.P. Knight, M. Salagaras, A.R. Trueman, The study of intergranular corrosion in aircraft aluminium alloys using X-ray tomography, Corros. Sci. 53 (2011) 727-734.   DOI
10 ASM International, ASM Handbook Vol 13A Corrosion: Fundamentals, Testing, and Protection, 2003, pp. 196-209.
11 Yoshiyuki Oya, Yoichi Kojima, Nobuyoshi Hara, Influence of Silicon on Intergranular Corrosion for Aluminum Alloys, MATERIALS TRANSACTIONS, Volume 54, Issue 7, (2013), 1200-1208.   DOI
12 Binger, W. W., Hollingsworth, E. H. and Sprawls, D., In Aluminium Vol. I, ed. Van Horn, ASM, (1967), p. 209.
13 M. Kaifu, H. Fujimoto and M. Takemoto, Influence of Mn contents and heat treatments on intergranular corrosion of Al-Mn alloys, J. Japan Inst. Met. 32 (1982), 135-142.
14 M. Zamin, The Role of Mn in the Corrosion Behavior of Al-Mn Alloys, Corrosion 37 (1981) 627-632.   DOI
15 Y. Zou, Q. Liu, Z. Jia, Y. Xing, L. Ding, and X. Wang, The intergranular corrosion behavior of 6000-series alloys with different Mg/Si and Cu content, Appl. Surf. Sci. 405 (2017) 489-496.   DOI
16 A.K. Bhattamishra, Kishori Lal, Microstructural studies on the effect of Si and Cr on the intergranular corrosion in Al-Mg-Si alloys, Materials & Design, Volume 18, Issue 1, (1997) 25-28.   DOI
17 Y. Zheng, B. Luo, Z. Bai, J. Wang, and Y. Yin, Study of the Precipitation Hardening Behavior and Intergranular Corrosion of Al-Mg-Si Alloys with Differing Si Contents, Metals (2017) 7, 387.   DOI
18 J. R. Galvele and S. M. de De Micheli, Mechanism of intergranular corrosion of Al-Cu alloys, Corros. Sci. 10 (1970), 795-807.   DOI
19 American Society for Testing and Materials (ASTM) International, ASTM G50-10 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals (2010).
20 M. Navaser, M. Atapour, Effect of Friction Stir Processing on Pitting Corrosion and Intergranular Attack of 7075 Aluminum Alloy, J. Mater. Sci. Tech. 33 (2017) 155-165.   DOI