1 |
D. B. Lee, High-temperature Corrosion by Chlorides in Biomass-fired Plants. J. Kor. Inst. Surf. Eng., 49 (2016) 14-19.
DOI
|
2 |
P. Viklund, Superheater corrosion in biomass and waste fired boilers: characterisation, causes and prevention of chlorine-induced corrosion. Diss. KTH Royal Institute of Technology, (2013) 6.
|
3 |
S. M. Bruemmer, B. W. Arey and L. A. Charlot. Influence of chromium depletion on intergranular stress corrosion cracking of 304 stainless steel, Corros., 48 (1992) 42-49.
DOI
|
4 |
S. Zhang, T. Shibata and T. Haruna, Initiation and propagation of IGSCC for sensitized type 304 stainless steel in dilute sulfate solutions, Corros. Sci., 39 (1997) 1725-1739.
DOI
|
5 |
A. Y. Kina, V. M. Souza, S. S. M. Tavares, J. M. Pardal and J. A. Souza, Microstructure and intergranular corrosion resistance evaluation of AISI 304 steel for high temperature service, Mater. charact., 59 (2008) 651-655.
DOI
|
6 |
K. G. Nam, Y. S. He, J. C. Chang and K. S. Shin, Microstructural Evolution of Super304H Steel upon Long-Term Aging, Key Eng. Mater., 727 (2017) 36-42.
DOI
|
7 |
X. Bai, J. Pan, G. Chen, J. Liu, J. Wang, T. Zhang, and W. Tang, Effect of high temperature aging on microstructure and mechanical properties of HR3C heat resistant steel, Mater. Sci. and Tech., 30 (2014) 205-210.
DOI
|
8 |
A. Iseda, H. Okada, H. A. Semba and M. Igarashi, Long term creep properties and microstructure of SUPER304H, TP347HFG and HR3C for A-USC boilers, Energy Mater., 2 (2007) 199-206.
DOI
|
9 |
M. Farooq, Strengthening and degradation mechanisms in austenitic stainless steels at elevated temperature, Diss. KTH Royal Institute of Technology (2013) 26.
|
10 |
E. A. Trillo and L. E. Murr, Effects of carbon content, deformation, and interfacial energetics on carbide precipitation and corrosion sensitization in 304 stainless steel, Acta materialia, 47 (1998) 235-245.
DOI
|
11 |
W. Wang, Z. Wang, W. Li, J. Tian, W. Zhong and J. Lin, Evolution of phase in HR3C steel aged at ." Mater. High Temp., 33 (2016) 276-282.
DOI
|
12 |
E. A. Trillo, R. Beltran, J. G. Maldonado, R. J. Romero, L. R. Murr, W. W. Fisher and A. H. Advani, Combined effects of deformation (strain and strain state), grain size, and carbon content on carbide precipitation and corrosion sensitization in 304 stainless steel, Mater. Charact., 35 (1995) 99-112.
DOI
|
13 |
H. Tanaka, M. Murata, F. Abe and H. Irie, Microstructural evolution and change in hardness in type 304H stainless steel during long-term creep, Mater. Sci. and Eng., A 319 (2001) 788-791.
|
14 |
X. Xiao, G. Liu, B. Hu, J. Wang, and W. Ma, Coarsening behavior for carbide in 12% Cr-reduced activation ferrite/martensite steel: experimental study combined with DICTRA simulation, J. Mater. Sci., 48 (2013) 5410-5419.
DOI
|