Browse > Article
http://dx.doi.org/10.5695/JKISE.2016.49.5.401

Effect of Zincate Treatment of As-Cast AZ91 Mg Alloy on Electrodeposition of Copper in a Copper Pyrophosphate Bath  

Nguyen, Van Phuong (Korea Institute of Materials Science)
Park, Min-Sik (KMW Inc.)
Yim, Chang Dong (Korea Institute of Materials Science)
You, Bong Sun (Korea Institute of Materials Science)
Moon, Sungmo (Korea Institute of Materials Science)
Publication Information
Journal of the Korean institute of surface engineering / v.49, no.5, 2016 , pp. 401-407 More about this Journal
Abstract
In this work, effect of zincate treatment of AZ91 Mg alloy on the following electrodeposition of copper was examined in a non-cyanide bath containing pyrophosphate ions in view of surface morphology and adhesion of the electrodeposited copper layer. Without zincate treatment, the electrodeposited copper layer showed very porous structure and poor adhesion. On the other hand, the copper layer electrodeposited on the zincate-treated surface showed dense structure and good adhesion. The dissolution rate of AZ91 Mg alloy after the zincate treatment appeared to decrease about 40 times in the copper pyrophosphate bath, as compared to that of the surface without zincate treatment. The porous morphology and poor adhesion of a copper layer on the AZ91 Mg alloy surface without zincate treatment were attributed to small number of nucleation sites of copper because of rapid dissolution of the magnesium substrate in the pyrophosphate bath. Based on the experimental results, it is concluded that the zincate treatment to form a conducting and protecting layer on the AZ91 Mg alloy surface is essential for successful electrodeposition of a copper layer on AZ91 Mg alloy with good adhesion and dense structure in the copper pyrophosphate bath.
Keywords
Mg alloy; Copper plating; Electroplating; AZ91 Mg alloy; Pyrophosphate; Zincate treatment;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 J. E. Gray, B. Luan, Protective coatings on magnesium and its alloys - a critical review, J. Alloy Compd., 336 (2002) 88-113.   DOI
2 N. V. Phuong, K. H. Lee, D. Chang, M. Kim, S. Lee, S. Moon, Zinc phosphate conversion coatings on magnesium alloys - a review, Met. Mater. Int., 19 (2013) 273-281.   DOI
3 X. B. Chen, H. Y. Yang, T. B. Abbott, M. A. Easton, N. Birbilis, Corrosion-resistance electrochemical platings on magnesium alloys: A state-of-the-art review, Corrosion, 68 (2011) 518-535.
4 G. L. Song, Corrosion prevention of magnesium alloys, Woodhead Publishing Limited. (2013).
5 R. F. Basit, S. Moon, Formation of cerium conversion coatings on AZ31 magnesium alloy, J. Kor. Inst. Surf. Eng., 49 (2016) 1-13.   DOI
6 F. Czerwinski, Magnesium alloys - Corrosion and surface treatments, InTech, Croatia, (2011) 153-184.
7 T. S. N. Sankara Narayanan, I. S. Park, M. H. Lee, Strategies to improve the corrosion resistance of microarc oxidation (MAO) coated magnesium alloys for degradable implants: Prospects and challenges, Prog. Mater. Sci., 60 (2014) 1-71.   DOI
8 N. V. Phuong, S. Moon, Deposition and characterization of E-paint on magnesium alloys, Prog. Org. Coat., 89 (2015) 91-99.   DOI
9 A. Atrens, G. -L. Song, M. Liu, Z. Shi, F. Cao, M. S. Dargusch, Review of recent developments in the field of magnesium corrosion, Adv. Eng. Mater., 17 (2015) 400-453.   DOI
10 L. P. Wu, J. J. Zhao, Y. P. Xie, Z. D. Yang, Progress of electroplating and electroless plating on magnesium alloy, Trans. Nonferrous Met. Soc. China, 20 (2010) 630-637.   DOI
11 X. P. Lei, G. Yu, Y. P. Zhu, Z. P. Zhang, X. M. He, B. N. Hu, Y. Chen, Successful cyanide free plating protocols on magnesium alloys, T. I. Met. Finish., 88 (2010) 75-80.   DOI
12 P. Zhu, L.Y. Wang, G.R.Qian, T.H. Cao, Copper coating electrodeposited directly onto AZ31 magnesium alloy, Anti-Corros. Method. M., 60 (2013) 127-133.   DOI
13 N. V. Phuong, M. S. Park, C. D. Yim, B. S. You, S. Moon, Electrodeposition of copper on AZ91 Mg alloy in cyanide solution, J. Kor. Inst. Surf. Eng., 49 (2016) 238-244.   DOI
14 Modern electroplating 5th edition, Mordechay Schlesinger (Editor), Milan Paunovic (Editor), A John Wiley & Sons, Inc., Publication (2010) 33-78.
15 C. A. Huang, T. H.Wang, T. Weirich, V. Neubert, A pretreatment with galvanostatic etching for copper electrodeposition on pure magnesium and magnesium alloys in an alkaline copper-sulfate bath, Electrochim. Acta, 53 (2008) 7235-7241.   DOI
16 J. Tang, K. Azumi, Effect of copper pretreatment on the zincate process and subsequent copper electrodeposition of AZ31 magnesium alloy, J. Electrochem. Soc., 158 (2011) D535-D540.   DOI
17 P. Zhu, L. Y. Wang, Y. Chen, M. Zhou, J. Zhou, Electrodeposition of copper coating on AZ31 magnesium alloy, Surf. Eng., 28 (2012) 796-799.   DOI
18 J. C. Ballesteros, E. Chainet, P. Ozil, Y. Meas, G. Trejo, Electrodeposition of copper from non-cyanide alkaline solution containing tartrate, Int. J. Electrochem. Sci., 6 (2011) 2632-2651.
19 J. Tang, K. Azumi, Influence of zincate pretreatment on adhesion strength of a copper electroplating layer on AZ91 D magnesium alloy, Surf. Coat. Tech., 205 (2011) 3050-3057.   DOI
20 C. A. Huang, Y. H. Yeh, C. K. Lin, C. Y. Hsieh, Copper electrodeposition on a magnesium alloy (AZ80) with a U-Shaped surface, Materials, 7 (2014) 7366-7378.   DOI
21 O. Radovici, Cecilia Vass, I. Solacolu, Some aspects of copper electrodeposition from pyrophosphate electrolytes, Electrodepos. Surface Treat., 2 (1974) 263-273.   DOI
22 J. H. Lee, Y. H. Kim, U. C. Jung, W. S. Chung, Electroplating on magnesium alloy in KF-added pyrophosphate copper bath, Kor. J. Met. Mater., 48 (2010) 218-224.   DOI
23 J. Kato, W. Urushihara, T. Nakayama, Magnesium based alloys article and a method thereof, US Patent No: 6,068,938.
24 ASTM standard D3359-02, ASTM International; 2004, 06.01.
25 Tohru Watanabe, Nano-plating: Microstructure control theory of plated film and data base of plated film microstructure, Elsevier (2004).
26 M. Hayase, Electronics Packaging 3, The Electrochemical Society (2009).