1 |
H. R. Bakhsheshi-Rad, M. H. Idris, M. R. A. Kadir, M. Daroonparvar, Effect of fluoride treatment on corrosion behavior of Mg-Ca binary alloy for implant application, Trans. Nonferrous Met. Soc. China. 23 (2013) 699-710.
DOI
|
2 |
T. F. da Conceicao, N. Scharnagl, C. Blawert, W. Dietzel, K. U. Kainer, Surface modification of magnesium alloy AZ31 by hydrofluoric acid treatment and its effect on the corrosion behaviour, Thin Solid Films. 518 (2010) 5209-5218.
DOI
|
3 |
T. F. da Conceicao, N. Scharnagl, W. Dietzel, K. U. Kainer, Controlled degradation of a magnesium alloy in simulated body fluid using hydrofluoric acid treatment followed by polyacrylonitrile coating, Corros. Sci. 62 (2012) 83-89.
DOI
|
4 |
T.F. da Conceicao, N. Scharnagl, W. Dietzel, K.U. Kainer, Corrosion protection of magnesium AZ31 alloy using poly(ether imide) [PEI] coatings prepared by the dip coating method: Influence of solvent and substrate pre-treatment, Corros. Sci. 53 (2011) 338-346.
DOI
|
5 |
G. T. Bayer, M. Zamanzadeh, Failure analysis of paints and coatings, Publ. Internally Matco Assoc. SURFACE PREPARATION AND COATING APPLICATION PRACTICES. 331 (2004) 1-37.
|
6 |
Y. Zheng, Magnesium Alloys as Degradable Biomaterials, CRC Press, (2015).
|
7 |
T. S. N. S. Narayanan, I. S. Park, M. H. Lee, Surface Modification of Magnesium and its Alloys for Biomedical Applications: Modification and Coating Techniques, Elsevier, (2015).
|
8 |
P. Y. Casanova, K. J. Jaimes, N. J. Parada, C. A. Hernandez-Barrios, M. Aparicio, F. Viejo, A. E. Coy, Synthesis and evaluation of coatings by chemical conversion on magnesium alloys for producing biodegradable orthopedic implants of temporary use, J. Phys. Conf. Ser. 466 (2013) 12003 1-4.
DOI
|
9 |
X. -Y. Ye, M. -F. Chen, C. You, D. -B. Liu, The influence of HF treatment on corrosion resistance and in vitro biocompatibility of Mg-Zn-Zr alloy, Front. Mater. Sci. China. 4 (2010) 132-138.
DOI
|
10 |
B. R. Fazal, S. Moon, Acid Pickling/polishing of AZ31 Magnesium Alloy, J. Korean Inst. Surf. Eng. 49 (2016) 231-237.
DOI
|
11 |
ASTM standard D3359-02, ASTM International 06.01 (2004) 1-8.
|
12 |
ASTM standard B117-03, ASTM International 03.02 (2004) 1-12.
|
13 |
T. Yan, L. Tan, B. Zhang, K. Yang, Fluoride Conversion Coating on Biodegradable AZ31B Magnesium Alloy, J. Mater. Sci. Technol. 30 (2014) 666-674.
DOI
|
14 |
T. F. da Conceicao, N. Scharnagl, W. Dietzel, K. U. Kainer, Controlled degradation of a magnesium alloy in simulated body fluid using hydrofluoric acid treatment followed by polyacrylonitrile coating, Corros. Sci. 62 (2012) 83-89.
DOI
|
15 |
T. F. da Conceicao, N. Scharnagl, W. Dietzel, D. Hoeche, K. U. Kainer, Study on the interface of PVDF coatings and HF-treated AZ31 magnesium alloy: Determination of interfacial interactions and reactions with self-healing properties, Corros. Sci. 53 (2011) 712-719.
DOI
|
16 |
S. Verdier, N. van der Laak, S. Delalande, J. Metson, F. Dalard, The surface reactivity of a magnesium-aluminium alloy in acidic fluoride solutions studied by electrochemical techniques and XPS, Appl. Surf. Sci. 235 (2004) 513-524.
DOI
|