Browse > Article
http://dx.doi.org/10.5695/JKISE.2012.45.6.278

Characteristics Evaluation with Cavitation Condition of 304 Stainless Steel in Seawater Environment  

Jang, Seok-Ki (Division of Marine Engineering, Mokpo Maritime University)
Chong, Sang-Ok (Division of Marine Engineering, Mokpo Maritime University)
Han, Min-Su (Division of Marine Engineering, Mokpo Maritime University)
Kim, Seong-Jong (Division of Marine Engineering, Mokpo Maritime University)
Publication Information
Journal of the Korean institute of surface engineering / v.45, no.6, 2012 , pp. 278-283 More about this Journal
Abstract
This investigation evaluated the effect of cavitation condition on electrochemical characteristics of 304 stainless steel, which is widely used for marine environment. The cavitation test with time were conducted on 304 stainless steel in seawater solution. Surface morphologies of specimen were observed by scanning electron microscope (SEM) and 3D microscope. Pitting depth, weight loss and damage rate were analyzed after each cavitation experiment. The surface damage was more severe as the current density increased. A dramatical increase in the damage depth and weight loss was observed after 7 hours of cavitation experiment.
Keywords
Cavitation; Electrochemical experiment; Pitting depth; 304 stainless steel; Sea water;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 C. Y. Choi, N. H. Kang, D. G. Nam, J. Kor. Inst. Surf. Eng., 44 (2011) 173.   DOI
2 J. K. Bae, S. O. Park, I. S. Chung, J. Kor. Inst. Surf. Eng., 22 (1989) 185.
3 G. Okamoto, Corrosion Science, 13 (1973) 471.   DOI
4 T. Momma, A. Lichtarowicz, Wear, 186-187 (1995) 425.   DOI
5 M. G. Lee, S. M. Hong, Q. H. Kim, C. K. Rhee, J. Kor. Inst. Met. Mater., 44 (2006) 350.
6 A. J. Sedriks, "Corrosion of Stainless Steels", Wiley- Interscience, (1996).
7 Denny A. Jones, "Principles and Prevention of Corrosion", 2nd Edition, (1996).
8 I. R. Jones, D. H. Edward, Journal of Fluid Mechanics, 7 (1960) 596.   DOI
9 M. R. Sriraman, R. Vasudevan, J. Mater. Sci., 33 (1998) 2899.   DOI
10 A. Al-Hashem, P. G. Caceres, A. Abdullah, H. M. Shalaby, NACE International, 53 (1997) 103.
11 K. H. Lo, F. T. Cheng, C. T. Kwok, H. C. Man, Surface & Coatings Technology, 165 (2003) 258.   DOI
12 Y. Zheng, S. Luo, W. Ke, Wear, 262 (2007) 1308.   DOI
13 X. B. Zhang, C. S. Liu, J. Zhu, Y. G. Zheng, Joural-Northeastern University Natural Science, 27 (2006) 1335.
14 A. Neville, T. Hodgkiess, British Corrosion Journal, 32 (1997) 197.   DOI
15 Book of ASTM Standards G32-92, 110, (1992).
16 M. Qin, D. Y. Ju, R. Oba, Surface & Coating Technology, 200 (2006) 5364.   DOI
17 J. C. Park, S. J. Lee, S. J. Kim, J. Kor. Inst. Surf. Eng., 44 (2011) 277.   DOI
18 D. Y. Ju, H. Tsuda, V. Ji, T. Uchiyama, R. Oba, Proceedings of the Third International Conference on Advanced Technology in Experimental Mechanics, 399 (2003).
19 S. J. Kim, K. Y. Hyun, S. K. Jang, Current. Appl. Phys., 12 (2012) S24.
20 D. Odhiambo, H. Soyama, International Journal of Fatigue, 25 (2003) 1217.   DOI
21 ASTM Special Technical Publication, 567 (1982).
22 S. J. Lee, S. J. Kim, Corros. Sci. Tech., 11 (2012) 205.   DOI
23 H. Mochizuki, M. Yokota, S. Hattori, Wear, 262 (2007) 522.   DOI
24 G. Bregliozzi, A. Di Schino, S. I. U. Ahmed, J. M. Kenny, H. Haefke, Wear, 258 (2005) 503.   DOI   ScienceOn