Browse > Article
http://dx.doi.org/10.7469/JKSQM.2018.46.2.327

A Risk Evaluation Procedure in FMEA for Failure Causes including Common Cause Failures  

Kim, Byung Nam (Department of Systems Management and Engineering, Pukyong National University)
Kwon, Hyuck Moo (Department of Systems Management and Engineering, Pukyong National University)
Hong, Sung Hoon (Department of Industrial & Information Systems Engineering, Chonbuk National University)
Lee, Min Koo (Department of Information and Statistics, Chungnam National University)
Publication Information
Journal of Korean Society for Quality Management / v.46, no.2, 2018 , pp. 327-338 More about this Journal
Abstract
Purpose: A risk evaluation procedure is proposed for common failure causes in FMEA(Failure Mode and Effects Analysis). The conventional FMEA does not provide a proper means to compare common failure causes with other failure causes. This research aims to develop a risk evaluation procedure in FMEA where common failure causes and other failure causes exist together. Methods: For each common failure cause, the effect of each combination of its resulting failures is recommended to be reevaluated considering their interactive worsening effect. And the probability that each combination of failures is incurred by the same common cause is also considered. Based on these two factors, the severity of each common cause is determined. Other procedures are similar to the conventional method. Results: The proposed procedure enables to compare and prioritize every failure cause. Thus, the common causes, each of which incurring two or more failures, and other causes, each of which is corresponding to one failure, can be fairly compared. Conclusion: A fair and proper way of comparing the common failure causes and other causes is provided. The procedure is somewhat complicated and requires more works to do. But it is worth to do.
Keywords
FMEA; Common Failure Cause; Common Cause Failure; Revised Risk Priority Number;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Browne, A. M., Mullen, R., Teets, J. T., Bollig, A. and Steven, J. 2018. "Common cause Analysis: Focus on institutional Change." https://www.ncbi.nlm.nih.gov/books/NBK43639/.
2 Childs, J. A., and Mosleh, A. 1999. "A modified FMEA Tool for Use in Identifying and Addressing Common Cause Failure Risks in Industry." IEEE 1999 Proceedings Annual Reliability and Maintainability Symposium, 19-24.
3 Clapper, C., and Crea, K. 2010. "Common Cause Analysis." Patient Safety & Quality Healthcare, May/June, 30-35.
4 Jones, H. W. 2016. "Common cause failures and ultra-reliability." NASA Ames research Center, https://ntrs.nasa.gov/.
5 Kelly, D. L., and Rasmuson, D. M. 2008. "Common cause failure analysis in event assessment." ANS PSA 2008 Topical meeting - challenges to PSA during the nuclear Renaissance, Knoxville, Tennessee, September 7-11.
6 Kreuser, A., and Johanson, G. 2017. "Recent insights from the international common-cause failure data exchange project." Nuclear Engineering and Technology 49:327-334.   DOI
7 Lilleheier, T. 2008. "Analysis of common cause failures in complex safety instrumented systems." July 28. www.ntnu.no/ross/reports/stud/lilleheier.pdf.
8 Liu, H., Liu, L,. and Liu, N., 2013. "Risk evaluation approaches in failure modes and effect analysis: A literature review." Expert Systems with Applications 40:327-334.
9 McGinley, P. 2010. "Common Cause Analysis." https://www.psqh.com/analysis/common-cause-analysis/.
10 Mosleh, A., Fleming, K.N., , G.W., Paula, H.M., Worledge, D.H., and Rasmuson, D.M., 1988. Procedures for Treating Common Cause Failures in Safety and Reliability Studies. Vol. 1. Procedural Framework and Examples. Electric Power Research Institute (January 1988). NUREG/CR-4780, EPRI NP-5613.
11 Parry, G.W., 1991. "Common cause failure analysis: A critique and som suggestions." Reliability Engineering & System Safety 34(3):309-326.   DOI
12 Sankar, N. R., and Prabhu, B. S., 2001. "Modified approach for prioritization of failures in a system failure mode and effects analysis." International Journal of Quality and Reliability Management. 18(3):324-335.   DOI
13 Rasmuson, D.M., and Mosleh, A. 2007. "A Brief History of Common-Cause Failure Analysis." IAEA Technical Meeting on CCF in Digital Instrumentation and Control Systems for Nuclear Power Plants, Bethesda, Maryland, June 20.
14 Rausand, M., and Hoyland, A., 2004. System Reliability Theory - Models, Statistical Methods, and Applications, 2nded. John Wiley and Sons.