Browse > Article

Basic Study on Combustion Characteristics of Coaxial Premixed Burner with the Addition of $Al_2O_3$ Particles  

Park, Seung-Il (중앙대학교 기계공학부)
Kim, Go-Tae (중앙대학교 기계공학부)
Kim, Nam-Il (중앙대학교 기계공학부)
Publication Information
Journal of the Korean Society of Combustion / v.16, no.1, 2011 , pp. 58-65 More about this Journal
Abstract
Thermal spray technology has been used in many industrial application. Especially, thermal spray coating have been employed with the purposes of achieving better resistances in abrasion, heat and corrosion. In the previous studies on the thermal spray coating, thermal spray characteristics from the perspective of combustion engineering have not been investigated sufficiently, while the material characteristics of the coated substrates have been investigated widely. In this study, the effect of spray particles on the flame behavior was experimentally investigated. The amount of the injected particles was measured using the light scattering method and the temperature of the particles was estimated using a two-color method. Various flame-spray interactions were observed and it was found that the high temperature zone near the flame is elongated by particles density. Based on these results, the applicability of the light scattering method and the two-color method was discussed.
Keywords
Thermal spray coating; Flame stability; Luminous intensity; Coaxial diffusion flame; Modeling;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Y.T Han, J.Y. Lee, J.W. Lim, K. Min, "광계측기법을 이용한 층류 및 난류 확산 화염에서의 매연 측정에 관한 연구," Transactions of KSAE, Vol 17, No. 6, 2009, pp. 8-17
2 Fan Jiang, Shi Liu, Shiqiang Liang, Zhihong Li, Xueyao Wang, Gang Lu, "Visual Flame Monitoring System Based on Two-Color Method," Journal of Thermal Science, Vol. 18, No. 3, 2009, pp. 284-288   DOI   ScienceOn
3 Y.W. Nam, W. Lee, "Modulated LII 신호와 이색법을 이용한 매연입자 온도 계측," KOSCO SYMPOSIUM, Vol. 33, pp. 110-116.
4 L. Pawlowski, "The Science and Engineering of Thermal Spray Coatings," 2nd Edition, WILEY, 2008, pp. 69-70
5 P. Fauchais, A. Vardelle, B. Dussoubs, "Quo Vadis Thermal Spraying?," Journal of Thermal Spray Technology, Vol. 10, No. 1, pp. 44-66   DOI   ScienceOn
6 K.A. Khor, P. Cheangd, "Characterization of Thermal Sprayed Hydroxyapatite Powders and Coatings," Journal of Thermal Spray Technology, Vol. 3, No. 1, pp. 45-50
7 C.W. Lee, I.H. Oh, H.K, Lee, B.T. Lee, "플라즈마 용사법에 의한 Hydroxyapatite 코팅층의 제조와 미세구조," Journal of the Korean Ceramic Society, Vol. 41, No. 3, pp. 259-265   DOI
8 G.B. Kwon, D.H. Cho, Y.K. Chang, Y.N. Paik, "HVOF를 이용한 Fe-Cr-Ni-Mo-Si-B계 고성능 합금 용사층의 특성에 미치는 용사조건의 영향," 한국표면공학회지, Vol. 35, No. 1, pp. 5-10
9 J.W. Chung, W. Lee, Y. T. Han, B.S. Kim, C. B. Lee, D.J. Kim, K.H. Lee, "LII/LIS 기법을 이용한 층류확산화염 매연입자의 정량화," 한국연소학회지, pp. 1-8