Browse > Article
http://dx.doi.org/10.9718/JBER.2013.34.1.14

Evaluation of Biomechanical Stability of Newly Developed Revision Total Knee Arthroplasty through Strain and Stress Distribution Analysis within the Tibia: Finite Element Analysis  

Han, Paul (Department of Mechanical Engineering, Sejong University)
Jang, Young-Woong (Department of Mechanical Engineering, Sejong University)
Yoo, Oui Sik (Central R&D center, CORENTEC Co., LTD.)
Kim, Jung Sung (Central R&D center, CORENTEC Co., LTD.)
Kim, Han Sung (Department of Biomedical Engineering, Yonsei University)
Lim, Dohyung (Department of Mechanical Engineering, Sejong University)
Publication Information
Journal of Biomedical Engineering Research / v.34, no.1, 2013 , pp. 14-23 More about this Journal
Abstract
In this study, biomechanical stability of the newly developed revision total knee arthroplasty (rTKA) was evaluated through strain and stress distribution analysis within the implanted proximal tibia using a three-dimensional finite element (FE) analysis. 2000N of compressive load (about 3 times body weight) was applied to the condyle surface on spacer, sharing by the medial (60%) and lateral (40%) condyles simulating a stance phase before toe-off. The results showed that PVMS within the revision total knee arthroplasty and the proximal tibia were less than yield strength considering safe factor 4.0 (rTKA: less than 10%, Cortical bone: less than 70%, Cancellous bone: less than 70%). The materials composed of them and the strain and stress distributions within the proximal tibia were generally well matched with those of a traditional revision total knee arthoplasty (Scorpio TS revision system, Stryker Corp., Michigan, USA) without the critical damage strain and stress, which may reduce the capacity for bone remodeling, leading to bone degeneration. This study may be useful to design parameter improvement of the revision total knee arthoplasty in biomechanical stability point of view beyond structural stability of revision total knee arthoplasty itself.
Keywords
Revision Total Knee Arthroplasty; Finite Element Analysis; Stress and Strain Distribution; Biomechanical Stability; Structural Stability;
Citations & Related Records
연도 인용수 순위
  • Reference
1 E. Rubin, JL. Farber, Bone and Joints: Pathology 2nd edition, Press, 1994, pp. 1273-2347.
2 A.J. Bailey, C. Buckland-Wright, and D. Metz, "The role of bone in osteoarthritis," Age Ageing, vol. 30, no. 5, pp.374-378, 2001.   DOI   ScienceOn
3 A.J. Carr, O. Robertsson, and S. Graves, "Knee replacement," Lancet, vol. 379, no. 9823, pp. 1331-1340, 2012.   DOI   ScienceOn
4 G.A. Engh, D.J. Ammeen, "Bone loss with revision total knee arthroplasty: defect classification and alternatives for reconstruction," Instr Course Lect, vol. 48, no. pp. 167-175, 1999.
5 H.D. Clarke, R.T. Trousdale, "Component fracture in total knee arthroplasty," Knee, vol. 6, no. 4, pp. 261-267, 1999.   DOI   ScienceOn
6 Matthew, S. A., Peter F. S. and William J. H. "Knee failure mechanisms after total knee arthroplasty." Techniques in Knee Surgery, vol. 3, no. 1, pp. 55-59, 2004.   DOI   ScienceOn
7 C.J. Lavernia, M.K. Drakeford, and A.K. Tsao, "Revision and primary hip and knee arthroplasty. A cost analysis," Clin Orthop Relat Res, vol. no. 311, pp. 136-141, 1995.
8 K.P. Emmerson, C.G. Moran, and I.M. Pinder, "Survivorship analysis of the Kinematic Stabilizer total knee replacement: a 10-to 14-year follow-up," J Bone Joint Surg Br, vol. 78, no. 3, pp. 441-445, 1996.
9 C.S. Ranawat, C.P. Luessenhop, and J.A. Rodriguez, "The press-fit condylar modular total knee system. Four-to-sixyear results with a posterior-cruciate-substituting design," J Bone Joint Surg Am, vol. 79, no. 3, pp. 342-348, 1997.   DOI
10 D.J. Weir, C.G. Moran and I.M. Pinder, "Kinematic condylar total knee arthroplasty. 14-year survivorship analysis of 208 consecutive cases," J Bone Joint Surg Br, vol. 78, no. 6, pp. 907-911, 1996.   DOI   ScienceOn
11 P. Ducheyne, A. Kagan, 2nd and J.A. Lacey, "Failure of total knee arthroplasty due to loosening and deformation of the tibial component," J Bone Joint Surg Am, vol. 60, no. 3, pp. 384-391, 1978.   DOI
12 J.N. Insall, R.W. Hood, and L.B. Flawn, "The total condylar knee prosthesis in gonarthrosis. A five to nine-year followup of the first one hundred consecutive replacements," J Bone Joint Surg Am, vol. 65, no. 5, pp. 619-628, 1983.   DOI
13 T. Tsonga, S. Kapetanakis, and C. Papadopoulos, "Evaluation of improvement in quality of life and physical activity after total knee arthroplasty in greek elderly women," Open Orthop J, vol. 5, no. pp. 343-347, 2011.   DOI   ScienceOn
14 J. Bugala-Szpak, D. Kusz, and I. Dyner-Jama, "Early evaluation of quality of life and clinical parameters after total knee arthroplasty," Ortop Traumatol Rehabil, vol. 12, no. 1, pp. 41-49, 2010.
15 M.I. Gusso, A. Capone, and R. Civinini, "The spacer block technique in revision of total knee arthroplasty with septic loosening," Chir Organi Mov, vol. 80, no. 1, pp. 21-27, 1995.
16 J.W. Barrington, A. Sah, and H. Malchau, "Contemporary cruciate-retaining total knee arthroplasty with a pegged tibial baseplate. Results at a minimum of ten years," J Bone Joint Surg Am, vol. 91, no. 4, pp. 874-878, 2009.   DOI   ScienceOn
17 D.C. Markel, J.E. Femino, and P. Farkas, "Analysis of lower extremity embolic material after total knee arthroplasty in a canine model," J Arthroplasty, vol. 14, no. 2, pp. 227-232, 1999.   DOI   ScienceOn
18 D. Taylor, "Bone maintenance and remodeling: a control system based on fatigue damage," J Orthop Res, vol. 15, no. 4, pp. 601-606, 1997.   DOI   ScienceOn
19 T.K. Fehring, S. Odum, and C. Olekson, "Stem fixation in revision total knee arthroplasty: a comparative analysis," Clin Orthop Relat Res, vol. no. 416, pp. 217-224, 2003.   DOI
20 R.L. Barrack, C. Rorabeck, and M. Burt, "Pain at the end of the stem after revision total knee arthroplasty," Clin Orthop Relat Res, vol. no. 367, pp. 216-225, 1999.
21 M. Tew, W. Waugh, "Tibiofemoral alignment and the results of knee replacement," J Bone Joint Surg Br, vol. 67, no. 4, pp. 551-556, 1985.
22 E. Kellis, "Tibiofemoral joint forces during maximal isokinetic eccentric and concentric efforts of the knee flexors," Clin Biomech (Bristol, Avon), vol. 16, no. 3, pp. 229-236, 2001.   DOI   ScienceOn
23 I.J. Harrington, "A bioengineering analysis of force actions at the knee in normal and pathological gait," Biomed Eng, vol. 11, no. 5, pp. 167-172, 1976.
24 A. Completo, A. Rego, and F. Fonseca, "Biomechanical evaluation of proximal tibia behaviour with the use of femoral stems in revision TKA: an in vitro and finite element analysis," Clin Biomech (Bristol, Avon), vol. 25, no. 2, pp. 159-165, 2010.   DOI   ScienceOn
25 P.J. Fonseca, J.M. Alves, "A new concept in underwater high fidelity low frequency sound generation," Rev Sci Instrum, vol. 83, no. 5, pp. 055007, 2012.   DOI   ScienceOn
26 R.L. Austman, J.S. Milner, D.W. Holdsworth, "The effect of the density-modulus relationship selected to apply material properties in a finite element model of long bone," J Bio mech, vol. 41, no. 15, pp. 3171-3176, 2008.
27 G.H. Van Lenthe, M.C. de Waal Malefijt, and R. Huiskes, "Stress shielding after total knee replacement may cause bone resorption in the distal femur," J Bone Joint Surg Br, vol. 79, no. 1, pp. 117-122, 1997.   DOI
28 M. Taylor, K.E. Tanner and M.A. Freeman, "Finite element analysis of the implanted proximal tibia: a relationship between the initial cancellous bone stresses and implant migration," J Biomech, vol. 31, no. 4, pp. 303-310, 1998.   DOI   ScienceOn
29 A.G. Au, V. James Raso, and A.B. Liggins, "Contribution of loading conditions and material properties to stress shielding near the tibial component of total knee replacements," J Biomech, vol. 40, no. 6, pp. 1410-1416, 2007.   DOI   ScienceOn
30 C.A. Pattin, W.E. Caler, and D.R. Carter, "Cyclic mechanical property degradation during fatigue loading of cortical bone," J Biomech, vol. 29, no. 1, pp. 69-79, 1996.   DOI   ScienceOn
31 U. Simon, P. Augat, A. Ignatius, "Influence of the stiffness of bone defect implants on the mechanical conditions at the interface: a finite element analysis with contact," J Biomech, vol. 36, no. 8, pp. 1079-1086, 2003.   DOI   ScienceOn
32 A.G. Au, A.B. Liggins, V.J. Raso, "A parametric analysis of fixation post shape in tibial knee prostheses," Med Eng Phys, vol. 27, no. 2, pp. 123-134, 2005.   DOI   ScienceOn
33 A.G. Au, V. James Raso, A.B. Liggins, "Contribution of loading conditions and material properties to stress shielding near the tibial component of total knee replacements," J Biomech, vol. 40, no. 6, pp. 1410-1416, 2007.   DOI   ScienceOn
34 N.A. Ramaniraka, L.R. Rakotomanana and P.F. Leyvraz, "The fixation of the cemented femoral component. Effects of stem stiffness, cement thickness and roughness of the cement-bone surface," J Bone Joint Surg Br, vol. 82, no. 2, pp. 297-303, 2000.   DOI