1 |
Jun Yu, Jukwang Lee, and Choongsik Bae, "Microscopic Characteristics of Evaporation Diemethyl Ether (DME) System", Transaction of the KSAE, Vol. 11, No. 3, 2003, pp. 58-64.
|
2 |
Hyeonsook Yoon, Kitae Yeom and Choongsik Bae, "The Effects of Pilot Injection on Combustion in Dimethyl- ether (DME) Direct Injection Compression Ignition Engine", SAE paper, 2007, 2007-24-0118.
|
3 |
Kazuki Chiba and Takeshi Okamoto and Mitsuru Konno, "Experimental and Numerical Analysis of High Pressure DME Spray", SAE paper, 2010, 2010-01-0880.
|
4 |
Ion M. Sivebaek, Spencer C. Sorenson and Joergen Jakobsen, "Dimethyl Ether (DME)-Assessment of Viscosity Using the New Volatile Fuel Viscometer (VFVM)", SAE paper, 2001, 2001-01-2013.
|
5 |
Sejun Lee, Sedoo Oh, Soojin Jeong and Ocktaeck Lim, "An Investigation on the Spray Characteristics of DME Common Rail Fuel Injection System with Variation of Ambient Pressure", Transaction of KSAE, Vol. 20, No. 2, 2012, pp. 90-97.
DOI
|
6 |
Jinwook Lee, Kuoungdoug Min, Kernyong Kang and Choongsik Bae, "Hydraulic Simulation and Experimental Analysis of Needle Response and Controlled Injection Rate Shape Characteristics in a Piezo-driven Diesel Injector", SAE paper, 2006, 2006-01-1119.
|
7 |
Byounggul Oh, Seungsuk Oh, Kangyoon Lee and Myoungho Sunwoo, "Development of an Injector Driver for Piezo Actuated Common Rail Injectors", SAE paper, 2007, 2007-01-3537.
|
8 |
James Smith, Gerald Szekely Jr, Arun Solomon and Scott Parrish, "A Comparison of Spray-Guided Stratified- Charge Combustion Performance with Outwardly- Opening Piezo and Multi-Hole Solenoid Injectors", SAE paper, 2011, 2011-01-1217.
|
9 |
Jangsik Kong, "Effect of Nozzle Geometry on the Common-rail Diesel Spray Characteristics", Master's Thesis of Korea Advanced Institute of Science and Technology, 2003.
|
10 |
Lisa Jacobsson, Ernst Winklhofer and Jerzy Chomiak, "Injection Orifice Shape: Effects on Spray Characteristics and Heat-Release Rate in a Large-Size Single-Cylinder Diesel Engine", SAE paper, 1999, 1999-01-3490.
|