1 |
P. G. Hill and D. Zhang, "The effects of swirl and tumble on combustion in spark-ignition engines", Progress in Energy and Combustion Science, Vol. 20, No. 5, 1994, pp. 373-429.
DOI
ScienceOn
|
2 |
R. Hadef and B. Lenze, "Effects of co- and counterswirl on the droplet characteristics in a spray flame", Chemical Engineering and Processing: Process Intensification, Vol. 47, No. 12, 2008, pp. 2209-2217.
DOI
ScienceOn
|
3 |
D. T. Li, R. Xiong and H. Xue, "Temperature measurement in the swirl chamber of an IDI engine using Moire deflectometry", Applied Thermal Engineering, Vol. 19, No. 5, 1999, pp. 543-554.
DOI
ScienceOn
|
4 |
Stevan Nemoda, Vukman Bakic, Simeon Oka, Goran Zivkovic and Nenad Crnomarkovic, "Experimental and numerical investigation of gaseous fuel combustion in swirl chamber", International Journal of Heat and Mass Transfer, Vol. 48, No. 21-22, 2005, pp. 4623-4632.
DOI
ScienceOn
|
5 |
LIU A B, MATHER D and REIYZ R D, "Modeling the Effects of Drop Drag and Breakup on Fuel Sprays", SAE Paper 930072, 1993.
|
6 |
J Senda, M Kobayashi, S Iwashita and H Fujimoto, "Modeling of Diesel Spray Impingement on a Flat Wall", SAE Paper 941894, 1994.
|
7 |
Kunpeng Qi, Liyan Feng, Xiabyin Leng, Baoguo Du and Wuqiang Long, "Simulation of quasi-dimensional combustion model for predicting diesel engine performance", Applied Mathematical Modelling, Vol. 35, No. 2, 2011, pp. 930-940.
DOI
ScienceOn
|
8 |
AVL LIST GmbH, "AVL FIRE 8.2 Manual-Theory", Graz, Austria, 2003.
|
9 |
F. Brandl, I. Reverencic, W. Cartellieri and J. C. Dent, "Turbulent air flow in the combustion bowl of a DI diesel engine and its effect on engine performance", SAE paper 790040, SAE Trans., Vol. 88, 1979.
|
10 |
M. J. Tindal, T. J. Williams and M. Aldoory, "The effect of inlet port design on cylinder gas motion in direct injection diesel engines", Flow in Internal Combustion Engines, ASME, New York, 1982, pp. 101-111.
|
11 |
Y. Shimamoto and K. Akiyama, "A study of squish in open combustion chambers of a diesel engine", JSME, Vol. 13, No.63, 1970, pp. 1096-1103.
DOI
|