1 |
Z. Han and R. D. Reitz, "Turbulence modeling of internal combustion engines using RNG models", Combustion Science and Technology, Vol. 106, 1995, pp. 267-295.
DOI
ScienceOn
|
2 |
J. C. Beale and R. D. Reitz, "Modeling spray atomization Kelvin-Helmholtz/Rayleigh-Taylor hybrid model", Atomization and Sprays, Vol. 9, 1999, pp. 623-650.
DOI
|
3 |
R. J. Kee, F. M. Rupley and J. A. Miller, "CHEMKINII: a fortran chemical kinetics package for the analyses of gas phase chemical kinetics", Sandia Report, 1989, SAND 89-8009.
|
4 |
A. Patel, S. C. Kong, and R. D. Reitz, "Development and validation of a reduced reaction mechanism for HCCI engine simulations", SAE technical paper, SAE 2004-01-0558, 2004.
|
5 |
H. J. Curran, S. L. Fischer and F. L. Dryer, "The reaction kinetics of dimethyl ether. II: low temperature oxidation in flow reactors", International Journal of Chemical Kinetics, Vol. 32, 2000, pp. 741-759.
DOI
ScienceOn
|
6 |
S. C. Kong, Y. Sun, and R. D. Reitz, "Modeling diesel spray flame lift-off, sooting tendency and NOx emissions using detailed chemistry with phenomenological soot model", J. Eng. Gas Turb. Pow., Vol. 129, 2007, pp.252-260.
DOI
ScienceOn
|
7 |
R. Egnell, "Comparison of heat release and NOx formation in a DI diesel engine running on DME and diesel fuel", SAE technical paper, SAE 2001-01-0651, 2001.
|
8 |
J. B. Heywood, "Internal combustion engine fundamentals", McGraw-Hill, 1988.
|
9 |
H. J. Kim, S. H. Park, H. K. Suh, and C. S. Lee, "Atomization and evaporation characteristics of biodiesel and dimentyl ether compared to diesel fuel in a high-pressure injection system", Energy&Fuels, Vol. 23, 2009, pp.1734-1742.
|
10 |
J. Yu, J. Lee, and C. Bae, "Dimethyl ether (DME) spray characteristics compared to diesel in a common-rail fuel injection system", SAE technical paper, SAE2002-01-2898, 2002.
|
11 |
H. Teng, J. C. McCandless, and J. B. Schneyer, "Thermodynamics properties of dimethyl ether - An alternative fuel for compression-ignition engines", SAE technical paper, SAE 2004-01-0093, 2004.
|
12 |
C. Arcoumanis, C. Bae, R. Crookes, and E. Kinoshita, "The potential of di-methyl ether (DME) as an alternative fuel for compression- ignition engines: A review", Fuel, Vol. 87, 2008, pp.1014-1030.
DOI
ScienceOn
|
13 |
H. K. Suh, S. W. Park, and C. S. Lee, "Atomization characteristics of dimethyl ether fuel as an alternative fuel injected through a common-rail injection system", Energy & Fuels, Vol. 20, 2006, pp.1471-1481.
DOI
ScienceOn
|
14 |
X. Sidu, Y. Mingfa, and X. Junfeng, "An experimental investigation on the spray characteristics of dimethyl ether (DME)", SAE technical paper, SAE 2001-01-0142, 2001.
|
15 |
S. W. Park, "Numerical study on optimal operating conditions of homogeneous charge compression ignition engines fueled with dimethyl ether and n-heptane", Energy & Fuels, Vol. 23, 2009, pp. 3909-3918.
DOI
|
16 |
M. Yao, and J. Qin, "Simulating the homogeneous charge compression ignition process using a detailed kinetic model for dimethyl ether (DME) and methane dual fuel", SAE technical paper, SAE 2004-01-2951, 2004.
|
17 |
M. Y. Kim, J. H. Lee, and C. S. Lee, "Combustion characteristics and NO emissions of a dimethyl-ether fueled premixed charge compression ignition engine", Energy & Fuels, Vol. 22(6), 2008, pp.4206-4212.
DOI
ScienceOn
|