Browse > Article
http://dx.doi.org/10.20910/JASE.2018.12.1.42

A Study on Structural Design and Analysis of Small Engine Test Equipment for Use in Aircraft  

Back, Kyeongmi (EGT Co., Ltd.)
Park, Hyunbum (Dept. of Defense Science & Technology-Aeronautics, Howon University)
Publication Information
Journal of Aerospace System Engineering / v.12, no.1, 2018 , pp. 42-46 More about this Journal
Abstract
The subject of this study dealt with the structural safety analysis regarding the measured thrust test equipment as noted on a small engine. In this work, the structural design and analysis of steel and aluminum alloy structure for a small engine test of equipment were performed. Firstly, the structural design requirements of the engine test equipment were identified and investigated. After the structural design was reviewed, next the structural analysis of the engine test equipment was performed by the utilization of the finite element analysis method. The study was performed to determine that the stress and displacement analysis was appropriately managed regarding the applied load condition. As a result, it was determined that through the structural analysis, this study has confirmed that the designed engine test equipment is approved for safety, and meets its design purpose at this time.
Keywords
Engine Test Equipment; Structural Design; Finite Element Method; Structural Analysis;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Yi-Rui Tang, Xiao Xiao, Yangmin Li, "Nonlinear dynamic modeling and hybrid control design with dynamic compensator for a small-scale UAV quadrotor," Measurement, vol. 109, pp. 51-64, 2017.   DOI
2 Umair Ahsun, Tabish Badar, Shiraz Tahir, Saeed Aldosari, "Real-time identification of propeller-engine parameters for fixed wing UAVs," IFAC-PapersOnLine, vol. 48, pp. 1082-1087, 2015.   DOI
3 Cem Tahsin Yucer, "Thermodynamic analysis of the part load performance for a small scale gas turbine jet engine by using exergy analysis method," Energy, vol. 111, pp. 251-259, 2016.   DOI
4 C. Kong, S. Lim, "A study of inverse modeling from micro gas turbine experimental test data," Journal of the Korean Society of Propulsion Engineers, vol. 13, no. 6, pp. 1-7, Dec. 2009.
5 C. Kong, M. Kang, G. Park, "Study on fault diagnostics considering sensor noise and bias of mixed flow type 2-spool turbofan engine using non-linear gas path analysis method and genetic algorithms," Journal of Aerospace System Engineering, vol. 7, no. 1, pp. 8-18, Mar. 2013.
6 C. Kong, S. Kho, K. Park, G. Park "Development of practical integral condition monitoring system for a small turbojet engine using SIMULINK and LabVIEW," Journal of the Korean Society of Propulsion Engineers, vol. 17, no. 1, pp. 80-88, Feb. 2013.   DOI
7 D. Han, "Fault detection of small turbojet engine for UAV using unscented Kalman Filter and sequential probability ratio test," Journal of Aerospace System Engineering, vol. 11, no. 4, pp. 22-29, Aug. 2017.   DOI
8 Y. Park, J. Im, J. Park, "Damage Tolerant Design for the Tilt Rotor UAV," Journal of Aerospace System Engineering, vol. 1, no. 2, pp. 27-36, Sep. 2007.
9 H. Hwang, S. Heo, J. K, J Bae, "Aircraft design and manufacturing for UAV," Journal of Aerospace System Engineering, vol. 2, no. 4, pp. 38-43, Dec. 2008.