Development of a diverging collimator for environmental radiation monitoring in the industrial fields |
Dong-Hee Han
(Department of Medical Health Science, Kangwon National University)
Seung-Jae Lee (Department of Radiological Science, Dongseo University) Jang-Oh Kim (Health and Medical Education Research Institute, Kangwon National University) Da-Eun Kwon (Department of Medical Health Science, Kangwon National University) Hak-Jae Lee (ARALE Laboratory Co., Ltd.) Cheol-Ha Baek (Department of Medical Health Science, Kangwon National University) |
1 | International atomic energy agency, PRIS homepage, http://pris.iaea.org/PRIS/home.aspx. |
2 | Y.C. Lai, S. Smith, Metaheuristic minimum dose path planning for nuclear power plant decommissioning, Ann. Nucl. Energy 166 (2022), 108800. |
3 | S.R. Lin, H.W. Chou, J.J. Chen, International case survey and literature review of maintenance strategy for decommissioning nuclear power plant during transition period, Int. J. Press. Vessel. Pip. 198 (2022), 104654. |
4 | K. Inoue, M. Arai, M. Fujisawa, K. Saito, M. Fukushi, Detailed distribution map of absorbed dose rate in air in tokatsu area of Chiba prefecture, Japan, Constructed by car-borne survey 4 Years after the Fukushima Daiichi nuclear power plant accident, PLoS One 12 (2017). |
5 | V. Mubayi, R. Youngblood, Reevaluating the current U.S. Nuclear regulatory commission's safety goals, Nucl. Technol. 207 (2021) 406-412. DOI |
6 | S.H. Jung, K. Kim, W.S. Jang, H.K. Jeong, B.J. Kwon, S.U. Kuh, S.H. You, H.J. Choi, K.B. Kim, Development of a direction-sensitive gamma-ray monitoring system using a gamma camera with a dual-sided collimator: a Monte Carlo study, Appl. Radiat. Isot. 178 (2021), 109937. |
7 | D.H. Han, J.H. Won, S.J. Lee, H.J. Lee, C.H. Baek, Optimization using Monte Carlo simulations of the thickness of a variable collimator for radiation monitoring, J. Korean Phys. Soc. 78 (2021) 627-633. DOI |
8 | M.I. Ahmad, M.H. Mohd, R. Nordin, F. Mohamed, A. Abu-Samah, N.F. Abdullah, Ionizing radiation monitoring technology at the verge of internet of things, Sensors 21 (2021) 1-29. DOI |
9 | S. Widodo, A. Abimanyu, R. Apribra, Development of drone mounted aerial gamma monitoring system for environmental radionuclide surveillance in BATAN, J. Phys. Conf. Ser. 1436 (2020), 012126. |
10 | S.D. Metzler, J.E. Bowsher, M.F. Smith, R.J. Jaszczak, Analytic determination of pinhole collimator sensitivity with penetration, IEEE Trans. Med. Imaging 20 (2001) 730-741. DOI |
11 | H. Il Kim, C.H. Baek, S. Jung An, S.W. Kwak, Y. Hyun Chung, Gamma camera with a two-layer diverging-slat collimator for radioisotope monitoring, Nucl. Instruments Methods Phys. Res. Sect. A Accel. Spectrometers, Detect. Assoc. Equip. 698 (2013) 90-93. DOI |
12 | H. Cha, S. Leem, K. Cho, C. Kang, S. Bae, B. Yu, J. Yeom, H. Lee, K. Lee, Simulation study on the effect of constant hole length of curved diverging collimators for radiation monitoring systems, IEEE Trans. Nucl. Sci. 68 (2021) 1135-1143. DOI |
13 | V. Bom, M. Goorden, F. Beekman, Comparison of pinhole collimator materials based on sensitivity equivalence, Phys. Med. Biol. 56 (2011) 3199-3214. DOI |
14 | J.H. Won, D.H. Han, S.J. Lee, C.H. Baek, Development of a gamma camera with a diverging collimator using DMLS 3D printing, J. Magn. 25 (2020) 606-613. DOI |
15 | S.R. Cherry, J.A. Sorenson, M.E. Phelps, Physics in Nuclear Medicine, Elsevier, Amsterdam, The Netherlands, 2012. |
16 | K. Van Audenhaege, R. Van Holen, S. Vandenberghe, C. Vanhove, S.D. Metzler, S.C. Moore, Review of SPECT collimator selection, optimization, and fabrication for clinical and preclinical imaging, Med. Phys. 42 (2015) 4796-4813. DOI |
17 | Y.J. Lee, D.H. Kim, H.J. Kim, The effect of high-resolution parallel-hole collimator materials with a pixelated semiconductor SPECT system at equivalent sensitivities: Monte Carlo simulation studies, J. Korean Phys. Soc. 64 (2014) 1055-1062. DOI |
18 | M. Georgiou, S. David, Development of a SiPM based gamma-ray imager using a Gd3Al2Ga3O12:Ce (GAGG:Ce) scintillator array, in: 2013 IEEE NSS/MIC, 2013, pp. 1-3. |