Applicability of nonlinear ultrasonic technique to evaluation of thermally aged CF8M cast stainless steel |
Kim, Jongbeom
(Korea Atomic Energy Research Institute)
Kim, Jin-Gyum (Korea Institute of Nuclear Safety) Kong, Byeongseo (Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology) Kim, Kyung-Mo (Korea Atomic Energy Research Institute) Jang, Changheui (Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology) Kang, Sung-Sik (Korea Institute of Nuclear Safety) Jhang, Kyung-Young (School of Mechanical Engineering, Hanyang University) |
1 | J.H. Cantrell, Quantitative assessment of fatigue damage accumulation in wavy slip metals from acoustic harmonic generation, Philos. Mag. 86 (2006) 1539-1554. DOI |
2 | J.-Y. Kim, L.J. Jacobs, J. Qu, J.W. Littles, Experimental characterization of fatigue damage in a nickel-base superalloy using nonlinear ultrasonic waves, J. Acoust. Soc. Am. 120 (2006) 1266-1273. DOI |
3 | K.H. Matlack, J.-Y. Kim, L.J. Jacobs, J. Qu, Review of second harmonic generation measurement techniques for material state determination in metals, J. Nondestruct. Eval. 34 (2014) 273. |
4 | A. Hikata, B.B. Chick, C. Elbaum, Dislocation contribution to the second harmonic generation of ultrasonic waves, J. Appl. Phys. 36 (1965) 229-236. DOI |
5 | C.-S. Seok, J.-P. Kim, Studies on the correlation between mechanical properties and ultrasonic parameters of aging lCr-lMo-0.25V steel, J. Mech. Sci. Technol. 19 (2005) 487-495. DOI |
6 | G.E. Dace, R.B. Thompson, O. Buck, Measurement of the acoustic harmonic generation for materials characterization using contact transducers, Rev. Prog. Quant. Nondestruct. Eval. 11B (1992) 2069-2076. |
7 | A. Viswanath, B.P.C. Rao, S. Mahadevan, P. Parameswaran, T. Jayakumar, B. Raj, Nondestructive assessment of tensile properties of cold worked AISI type 304 stainless steel using nonlinear ultrasonic technique, J. Mater. Process. Technol. 211 (2011) 538-544. DOI |
8 | R.B. Thompson, O. Buck, D.O. Thompson, Higher harmonics of finite amplitude ultrasonic waves in solids, J. Acoust. Soc. Am. 59 (1976) 1087-1094. DOI |
9 | J. Kim, D.G. Song, K.Y. Jhang, A method to estimate the absolute ultrasonic nonlinearity parameter from relative measurements, Ultrasonics 77 (2017) 197-202. DOI |
10 | J.H. Cantrel, W.T. Yost, Effect of precipitate coherency strains on acoustic harmonic generation, J. Appl. Phys. 81 (1997) 2957-2962. DOI |
11 | K.-Y. Jhang, Application of nonlinear ultrasonics to the NDE of material degradation, IEEE Trans. Ultrason. Ferroelectr. Freq. Control 47 (2000) 540-548. DOI |
12 | C. Jang, H. Jang, S. Hong, J.G. Lee, Evaluation of the recovery of thermal aging embrittlement of CF8M cast stainless steels after reversion heat treatments, Int. J. Press. Vessel. Pip. 131 (2015) 67-74. DOI |
13 | H. Jang, S. Hong, C. Jang, J.G. Lee, The effects of reversion heat treatment on the recovery of thermal aging embrittlement of CF8M cast stainless steels, Mater. Des. 56 (2014) 517-521. DOI |
14 |
G.O. Subramanian, B.S. Kong, H.J. Lee, C. Jang, Evaluation of the thermal aging of |
15 | R.E. Jacob, T.L. Moran, A.E. Holmes, A.A. Diaz, M.S. Prowant, Interim Analysis of the EPRI CASS Round Robin Study, Pacific Northwest National Labatory, PNNL-27712, 2018, pp. 1-44. |
16 | J. Kim, K.-Y. Jhang, Assessment of thermal degradation by cumulative variation of ultrasonic nonlinear parameter, Int. J. Precis. Eng. Manuf. 18 (2017) 23-29. DOI |
17 | K. Balasubramaniam, J.S. Valluri, R.V. Prakash, Creep damage characterization using a low amplitude nonlinear ultrasonic technique, Mater. Char. 62 (2011) 275-286. DOI |
18 | J. Kim, K.-Y. Jhang, Evaluation of ultrasonic conlinear characteristics in heat-treated aluminum alloy (Al-Mg-Si-Cu), Ann. Mater. Sci. Eng. 407846 (2013) 1-6. |
19 | J. Kim, K.-Y. Jhang, C. Kim, Dependence of nonlinear ultrasonic characteristic on second-phase precipitation in heat-treated Al 6061-T6 alloy, Ultrasonics 82 (2018) 84-90. DOI |
20 | J. Park, M. Kim, B. Chi, C. Jang, Correlation of metallurgical analysis & higher harmonic ultrasound response for long term isothermally aged and crept FM steel for USC TPP turbine rotors, NDT Int. 54 (2013) 159-165. DOI |
21 | G. Gutierrez-Vargas, A. Ruiz, J.-Y. Kim, L.J. Jacobs, Characterization of thermal embrittlement in 2507 super duplex stainless steel using nonlinear acoustic effects, NDT Int. 94 (2018) 101-108. DOI |
22 | C.O. Ruud, A.A. Diaz, M.T. Anderson, Grain Structure Identification and Casting Parameters of Austenitic Stainless Steel (CASS) Piping, Pacific Northwest National Labatory, PNNL-19002, 2009. |
23 | M. Hong, Z. Su, Q. Wang, L. Cheng, X. Qing, Modeling nonlinearities of ultrasonic waves for fatigue damage characterization: theory, simulation, and experimental validation, Ultrasonics 54 (2014) 770-778. DOI |
24 | K.-Y. Jhang, Nonlinear ultrasonic techniques for nondestructive assessment of micro damage in material: a review, Int. J. Precis. Eng. Manuf. 10 (2009) 123-135. DOI |
25 | O.K. Chopra, G. Ayrault, Aging Degradation of Cast Stainless Steel: Status and Program, Argonne National Labatory, CONF, 1983, pp. 8310143-8310165. |
26 | O.K. Chopra, A. Sather, Initial Assessment of the Mechanisms and Significance of Low-Temperature Embrittlement of Cast Stainless Steels in LWR Systems, U. S. Nuclear Regulatory Commission & Argonne National Labatory, NUREG/CR-5385(ANL-89/17), 1990. |
27 | U. S. Nuclear Regulatory Commission, Generic aging lessons learned (GALL) report, U. S. Nuclear Regulatory Commission, NUREG-1801, Rev 2 (2010). |
28 | K. Sakamoto, T. Furukawa, I. Komura, Y. Kamiyama, T. Mihara, Study on the ultrasound propagation in cast austenitic stainless steel, E-J. Adv. Mainten. 4 (2012) 1-21. |
29 | K. Sakamoto, T. Furukawa, I. Komura, Y. Kamiyama, T. Mih, Capability of ultrasonic testing for cast austenitic stainless steel in Japanese pressurized water reactors, E-J. Adv. Mainten. 4 (2012) 21-35. |
30 | M.T. Anderson, S.L. Crawford, S.E. Cumblidge, K.M. Denslow, A.A. Diaz, S.R. Doctor, Assessment of Crack Detection in Heavy-Walled Cast Stainless Steel Piping Welds Using Advanced Low-Frequency Ultrasonic Methods, U. S. Nuclear Regulatory Commission & Pacific Northwest National Laboratory, NUREG/CR-6933(PNNL-16292), 2007. |
31 | American Society of Mechanical Engineers, Rules for Inservice Inspection of Nuclear Power Plant Components, Section XI, ASME Boiler and Pressure Vessel Code, 2017. |
![]() |