1 |
S. Shi, M.P. Puls, Fracture strength of hydride precipitates in . 5Nb alloys 275 (1999) 312-317.
|
2 |
C.S. Fernanda, C. Alho, J.F. Labuz, Experiments on effective elastic modulus of two-dimensional solids with cracks and holes 33 (28) (1996) 4119-4130.
DOI
|
3 |
H.K. Birnbaum, P. Sofronis, Hydrogen-enhanced localized plasticity-a mechanism for hydrogen-related fracture 176 (1994) 191-202.
DOI
|
4 |
N. Rupa, M. Clavel, P. Bouffioux, C. Domain, A. Legris, About the mechanisms governing the hydrogen effect on visrnplastieity of unirradiated fully annealed zircaloy-4 sheet, Zircon. Nucl. Ind. Thirteen. Int. Symp. ASTM STP 1423 (2002) 811-836.
|
5 |
H. Li, et al., Hydride precipitation and its influence on mechanical properties of notched and unnotched Zircaloy-4 plates, J. Nucl. Mater. 436 (1-3) (2013) 84-92.
DOI
|
6 |
J.H. Huang, S.P. Huang, Effect of hydrogen contents on the mechanical properties of Zircaloy-4, J. Nucl. Mater. 208 (1-2) (1994) 166-179.
DOI
|
7 |
S.-C. Lin, M. Hamasaki, Y.-D. Chuang, The effect of dispersion and spheroidization treatment of zirconium hydrides on the mechanical properties of zircaloy, Nucl. Sci. Eng. 71 (3) (1979) 251-266.
DOI
|
8 |
M. Grange, J. Besson, E. Andrieu, Anisotropic behavior and rupture of hydrided ZIRCALOY-4 sheets, Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 31 (3) (2000) 679-690.
|
9 |
B.V. Cockeram, K.S. Chan, In situ studies and modeling the fracture of Zircaloy-4, J. Nucl. Mater. 393 (3) (2009) 387-408.
DOI
|
10 |
M. Le Saux, J. Besson, S. Carassou, C. Poussard, X. Averty, Behavior and failure of uniformly hydrided Zircaloy-4 fuel claddings between and under various stress states, including RIA loading conditions, Eng. Fail. Anal. 17 (3) (2010) 683-700.
DOI
|
11 |
Z.X. Wu, Y.W. Zhang, M.H. Jhon, D.J. Srolovitz, Anatomy of nanomaterial deformation: grain boundary sliding, plasticity and cavitation in nanocrystalline Ni, Acta Mater. 61 (15) (2013) 5807-5820.
DOI
|
12 |
S.M. Myers, et al., Hydrogen interactions with defects in crystalline solids, Rev. Mod. Phys. 64 (2) (1992) 559-617.
DOI
|
13 |
C. Vitanza, A review and interpretation of ria experiments, Nucl. Eng. Technol. 39 (5) (Oct. 2007) 591-602.
DOI
|
14 |
J. Kim, H. Yoon, D. Kook, Y. Kim, A study on the initial characteristics of domestic spent nuclear fuels for long term dry storage, Nucl. Eng. Technol. 45 (3) (2013) 377-384.
DOI
|
15 |
J.S. Kim, Y.J. Kim, D.H. Kook, Y.S. Kim, A study on hydride reorientation of Zircaloy-4 cladding tube under stress, J. Nucl. Mater. 456 (2015) 246-252.
|
16 |
T. Sugiyama, M. Umeda, T. Fuketa, H. Sasajima, Y. Udagawa, F. Nagase, Failure of high burnup fuels under reactivity-initiated accident conditions, Ann. Nucl. Energy 36 (3) (2009) 380-385.
DOI
|
17 |
J.B. Bai, C. Prioul, D. Francois, Hydride embrittlement in ZIRCALOY-4 plate: Part I. Influence of microstructure on the hydride embrittlement in ZIRCALOY-4 at and , Metall. Mater. Trans. A 25 (6) (1994) 1185-1197.
DOI
|
18 |
H.H. Hsu, M.F. Chiang, Y.C. Chen, The influence of hydride on fracture toughness of recrystallized Zircaloy-4 cladding, J. Nucl. Mater. 447 (1-3) (2014) 56-62.
DOI
|
19 |
J.S. Kim, T.H. Kim, D.H. Kook, Y.S. Kim, Effects of hydride morphology on the embrittlement of Zircaloy-4 cladding, J. Nucl. Mater. 456 (2015) 235-245.
|
20 |
F. Nagase, T. Fuketa, Investigation of hydride rim effect on failure of zircaloy-4 cladding with tube burst test, J. Nucl. Sci. Technol. 42 (1) (2005) 58-65.
DOI
|
21 |
J.S. Kim, J.D. Hong, Y.S. Yang, D.H. Kook, Rod internal pressure of spent nuclear fuel and its effects on cladding degradation during dry storage, J. Nucl. Mater. 492 (2017) 253-259.
|
22 |
K.J. Geelhood, W. Luscher, Frapcon-4.0: A Computer Code for the Calculation of Steady-State, Thermal-Mechanical Behavior of Oxide Fuel Rods for High Burnup, U.S. Dep. Energy, 2015.
|
23 |
R.P. Siqueira, H.R.Z. Sandim, T.R. Oliveira, D. Raabe, Composition and orientation effects on the final recrystallization texture of coarse-grained Nbcontaining AISI 430 ferritic stainless steels, Mater. Sci. Eng. A 528 (9) (2011) 3513-3519.
DOI
|
24 |
D.S. Stafford, Multidimensional simulations of hydrides during fuel rod lifecycle, J. Nucl. Mater. 466 (2015) 362-372.
DOI
|
25 |
O. Courty, A.T. Motta, J.D. Hales, Modeling and simulation of hydrogen behavior in Zircaloy-4 fuel cladding, J. Nucl. Mater. 452 (1-3) (2014) 311-320.
DOI
|
26 |
S. Oh, C. Jang, J.H. Kim, Y.H. Jeong, Effect of Nb on hydride embrittlement of Zr-xNb alloys, Mater. Sci. Eng. A 527 (6) (2010) 1306-1313.
DOI
|
27 |
J.W. Martin, Precipitation Hardening, Butterworth-Heinemann, 1998.
|
28 |
US NRC, Spent Fuel Project Office, Interim Staff Guidance-11, Revision 3, 2003.
|
29 |
Z.L. Pan, M.P. Puls, I.G. Ritchie, Measurement of hydrogen solubility during isothermal charging in a Zr alloy using an internal friction technique, J. Alloy. Comp. 211-212 (C) (1994) 245-248.
|
30 |
S. Yamanaka, et al., Characteristics of zirconium hydrogen solid solution, J. Alloy. Comp. 372 (1-2) (Jun. 2004) 129-135.
|
31 |
J. Xu, S.Q. Shi, Investigation of mechanical properties of -zirconium hydride using micro- and nano-indentation techniques, J. Nucl. Mater. 327 (2-3) (2004) 165-170.
DOI
|
32 |
M.P. Puls, S.Q. Shi, J. Rabier, Experimental studies of mechanical properties of solid zirconium hydrides, J. Nucl. Mater. 336 (1) (2005) 73-80.
DOI
|