1 |
J.G. Collier, Convective Boiling and Condensation, McGraw-Hill, New York, 1981.
|
2 |
RELAP5-3D(R) Code Development Team, RELAP5-3D(R) Code Manual Volume IV: Models and Correlations, Idaho National Lab., 2005. INEEL-EXT-98-00834.
|
3 |
KAERI, MARS Code Manual Volume I: Code Structure, System Models and Solution Methods, Korea Atomic Energy Research Institute, 2009. KAERI/TR-2812.
|
4 |
J.W. Spore, J.S. Elson, S.J. Jolly-Woodruff, T.D. Knight, J.C. Lin, R.A. Nelson, K.O. Pasamehmetoglu, R.G. Steinke, C. Unal, TRAC-M/Fortran 90(Version 3.0) Theory Manual, Los Alamos Lab, 2000. NUREG/CR-6724.
|
5 |
D. Bestion, The physical closure laws in the CATHARE code, Nucl. Eng. Des. 124 (3) (1990) 229-245.
DOI
|
6 |
P.G. Kroeger, N. Zuber, An analysis of the effects various parameters on the average void fractions in subcooled boiling, Int. J. Heat Mass Tran. 11 (2) (1968) 211-233.
DOI
|
7 |
J.E. Kennedy, G.M. Roach, M.F. Dowling, S.I. Abdel-Khalik, S.M. Ghiaasiaan, S.M. Jeter, Z.H. Quershi, The onset of flow instability in uniformly heated horizontal microchannels, J. Heat Tran. 122 (1) (2000) 118-125.
DOI
|
8 |
P. Saha, M. Ishii, N. Zuber, An experimental investigation of the thermally induced flow oscillations in two-phase systems, J. Heat Tran. 98 (4) (1976) 616-622.
DOI
|
9 |
P. Saha, N. Zuber, Point of net vapor generation and vapor void fraction in subcooled boiling, in: 5th International Heat Transfer Conference, Tokyo, 1974.
|
10 |
S.C. Lee, S.G. Bankoff, A comparison of predictive models for the onset of significant void at low pressures in forced-convection subcooled boiling, KSME Int. J. 12 (3) (1998) 504-513.
DOI
|
11 |
A. Ghione, B. Noel, P. Vinai, C. Demaziere, Criteria for onset of flow instability in heated vertical narrow rectangular channels at low pressure: an assessment study, Int. J. Heat Mass Tran. 105 (2017) 464-478.
DOI
|
12 |
V. Kalitvianski, Qualification of CATHARE 2 V1. 5 Rev. 6 on Subcooled Boiling Experiments (KIT Test), CEA, 2000. SMTH/LMDS/EM/2000-030.
|
13 |
J.T. Rogers, M. Salcudean, Z. Abdullah, D. Mcleod, D. Poirier, The onset of significant void in up-flow boiling of water at low pressure and velocities, Int. J. Heat Mass Tran. 30 (11) (1987) 2247-2260.
DOI
|
14 |
E.L. Bibeau, Experimental Investigation of Subcooled Void Growth for Upflow and Downflow at Low Velocities and Low Pressure, PhD Thesis, University of British Columbia, 1988.
|
15 |
T.W. Ha, J.J. Jeong, H.Y. Yoon, B.J. Yun, Improvement of the MARS subcooled boiling model for low-pressure, low-Pe flow conditions, Ann. Nucl. Energy 120 (2018) 236-245.
DOI
|
16 |
L.S. Sabotinov, Experimental Investigation of Void Fraction in Subcooled Boiling for Different Power Distribution Law along the Channel, PhD Thesis, Moskva in Russian, 1974.
|
17 |
S.Y. Lee, J.J. Jeong, S.H. Kim, S.H. Chang, COBRA/RELAP5: a merged version of the COBRA-TF and RELAP5/MOD3 codes, Nucl. Technol. 99.2 (1992) 177-187.
DOI
|
18 |
R.T. Lahey, A mechanistic subcooled boiling model, in: 6th International Heat Transfer Conference, Toronto, Canada, 1978.
|
19 |
C.G. Thurston, RELAP5/MOD3 Benchmarks of Low Pressure Subcooled Vapor Voiding in Annular Flow Channels, Babcock & Wilcox Advanced Systems Engineering, 1992. Doc. 51-3001526-00.
|
20 |
U.S. NRC, RELAP5/MOD3.3 Code Manual Volume I: Code Structure, System Models, and Solution Methods, U.S. Nuclear Regulatory Commission, 2010. NUREG/CR-5535/Rev P4-Vol I.
|
21 |
J.J. Jeong, K.S. Ha, B.D. Chung, W.J. Lee, Development of a multi-dimensional thermal-hydraulic system code, MARS 1.3. 1, Ann. Nucl. Energy 26 (18) (1999) 1611-1642.
DOI
|
22 |
M.O. Kim, S.J. Kim, G.C. Park, Comparison of void fraction profiles in subcooled boiling of low pressure by 3D measurement and MARS calculation, in: Korean Nuclear Society Conference, 2002.
|
23 |
J.J. Jeong, W.J. Lee, B.D. Chung, Simulation of a main steam line break accident using a coupled 'system thermal-hydraulics, three-dimensional reactor kinetics, and hot channel analysis' code, Ann. Nucl. Energy 33 (9) (2006) 820-828.
DOI
|
24 |
B.D. Chung, S.W. Bae, J.J. Jeong, S.M. Lee, Development and Assessment of Multidimensional Flow Models in the Thermal-hydraulic System Analysis Code MARS, Korea Atomic Energy Research Institute, 2005. KAERI/TR-3011/2005.
|
25 |
A.S. Devkin, A.S. Podosenov, RELAP5/MOD3 Subcooled Boiling Model Assessment, U.S. Nuclear Regulatory Commission, 1998. NUREG/IA-0025.
|
26 |
S. Hari, Y.A. Hassan, Improvement of the subcooled boiling model for low-pressure conditions in thermal-hydraulic codes, Nucl. Eng. Des. 216 (1) (2002) 139-152.
DOI
|
27 |
B. Koncar, B. Mavko, Modelling of low-pressure subcooled flow boiling using the RELAP5 code, Nucl. Eng. Des. 198 (3) (2003) 261-286.
DOI
|
28 |
S.R. Dimmick, W.N. Selander, A Dynamic Model for Predicting Subcooled Void: Experimental Results and Model Development, EUROTHERM seminar, Pisa, Italy, 1990.
|
29 |
K.S. Ha, Y.B. Lee, H.C. No, Improvements in predicting void fraction in subcooled boiling, Nucl. Technol. 150 (3) (2005) 283-292.
DOI
|
30 |
O.M. Zeitoun, Subcooled Flow Boiling and Condensation, PhD thesis, University of McMaster, 1994.
|
31 |
R.D. Mcleod, Investigation of Subcooled Void Fraction Growth in Water under Low Pressure and Low Flow Rate Conditions, Master thesis, University of Carleton, 1987.
|
32 |
J.K. Ferrell, D.M. Bylund, Low Pressure Steam-water Flow in a Heated Vertical Channel. Final Report Volume II on a Study of Convection Boiling inside Channels, North Carolina State University, Raleigh, 1966. Dept. of Chemical Engineering.
|
33 |
B. Donevski, M. Shoukri, Experimental Study of Subcooled Flow Boiling and Condensation in an Annular Channel, McMaster University, 1989. ME/89/TFRI.
|
34 |
R. Evangelisti, P. Lupoli, The void fraction in an annular channel at atmospheric pressure, Int. J. Heat Mass Tran. 12 (6) (1969) 699-711.
DOI
|
35 |
B.J. Yun, B.U. Bae, D.J. Euh, C.H. Song, Experimental investigation of local two-phase flow parameters of a subcooled boiling flow in an annulus, Nucl. Eng. Des. 240 (12) (2010) 3956-3966.
DOI
|
36 |
Y.G. Lee, J.W. Yoo, S. Kim, Measurement of local two-phase flow parameters in an annulus under low-pressure subcooled boiling condition, J. KSME (B) 42 (12) (2018) 813-824.
|
37 |
H. Umekawa, S. Nakamura, S. Fujiyoshi, T. Ami, M. Ozawa, Y. Saito, D. Ito, The influence of the heating condition on the void fraction in a boiling channel, Physics Procedia 69 (2015) 599-606.
DOI
|
38 |
S.Z. Rouhani, Void Measurements in the Regions of Sub-cooled and Low-quality Boiling, Part I. Low Mass Velocities, AB Atomenergi, 1966. No. AE-238.
|
39 |
H. Christensen, Power-to-void Transfer Functions, PhD Thesis, Massachusetts Institute of Technology, 1961.
|
40 |
S. Levy, Forced convection subcooled boiling-prediction of vapor volumetric fraction, Int. J. Heat Mass Tran. 10 (7) (1967) 951-965.
DOI
|
41 |
F.W. Staub, The void fraction in subcooled boiling-prediction of the initial point of net vapor generation, J. Heat Tran. 90 (1) (1968) 151-157.
DOI
|
42 |
T.L. Bergman, F.P. Incropera, A.S. Lavine, D.P. Dewitt, Introduction to Heat Transfer, fifth ed., John Wiley & Sons, 2011.
|
43 |
O. Zeitoun, M. Shoukri, Axial void fraction profile in low pressure subcooled flow boiling, Int. J. Heat Mass Tran. 40 (4) (1997) 869-879.
DOI
|
44 |
L.C. Burmeister, Convective Heat Transfer, second ed., John Wiley & Sons, 1993.
|
45 |
J.R. Sellars, M. Tribus, J. Klein, Heat Transfer to Laminar Flow in a Round Tube or Flat Conduit: the Graetz Problem Extended, 1954.
|
46 |
R. Siegel, E.M. Sparrow, T.M. Hallman, Steady laminar heat transfer in a circular tube with prescribed wall heat flux, Appl. Sci. Res. Section A 7 (5) (1958) 386-392.
DOI
|
47 |
F.W. Dittus, L.M.K. Boelter, University of California Publications on Engineering, University of California Publications in Engineering, vol. 2, 1930, p. 371.
|
48 |
E.L. Bibeau, M. Salcudean, Subcooled void growth mechanisms and prediction at low pressure and low velocity, Int. J. Multiphas. Flow 20 (5) (1994) 837-863.
DOI
|