Browse > Article
http://dx.doi.org/10.1016/j.net.2018.12.012

Numerical investigation on vortex behavior in wire-wrapped fuel assembly for a sodium fast reactor  

Song, Min Seop (Department of Nuclear Engineering, Seoul National University)
Jeong, Jae Ho (Korea Atomic Energy Research Institute)
Kim, Eung Soo (Department of Nuclear Engineering, Seoul National University)
Publication Information
Nuclear Engineering and Technology / v.51, no.3, 2019 , pp. 665-675 More about this Journal
Abstract
The wire-wrapped fuel bundle is an assembly design in a sodium-cooled fast reactor. A wire spacer is used to maintain a constant gap between rods and to enhance the mixing of coolants. The wire makes the flow complicated by creating a sweeping flow and vortex flow. The vortex affects the flow field and heat transfer inside the subchannels. However, studies on vortices in this geometry are limited. The purpose of this research is to investigate the vortex flow created in the wire-wrapped fuel bundle. For analysis, a RANS-based numerical analysis was conducted for a 37-pin geometry. The sensitivity study shows that simulation with the shear stress transport model is appropriate. For the case of Re of 37,100, the mechanisms of onset, periodicity, and rotational direction were analyzed. The vortex structures were reconstructed in a three-dimensional space. Vortices were periodically created in the interior subchannel three times for one wire rotation. In the edge subchannel, the largest vortex occurred. This large vortex structure blocked the swirl flow in the peripheral region. The small vortex formed in the corner subchannel was negligible. The results can help in understanding the flow field inside subchannels with sweeping flow and vortex structures.
Keywords
Sodium-cooled fast reactor; Wire-wrapped fuel bundle; Computational fluid dynamics; Vortex identification;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 M. Nishimura, H. Sato, H. Kamide, H. Ohshima, K. Nagasawa, Y. Imai, Investigation on velocity distribution around the wrapping wire in an inner subchannel of fuel pin bundle, in: 2012 20th International Conference on Nuclear Engineering and the ASME 2012 Power Conference, American Society of Mechanical Engineers, 2012, July, pp. 299-308.
2 H. Ohshima, Y. Imai, Numerical simulation of flow field in wire-wrapped fuel pin bundle of sodium cooled fast reactor using SPIRAL, Proc. of NTHAS5-F011 (2006) 480-487.
3 S.K. Chang, D.J. Euh, H.S. Choi, H. Kim, S.R. Choi, H.Y. Lee, Flow distribution and pressure loss in subchannels of a wire-wrapped 37-pin rod bundle for a sodium-cooled fast reactor, Nuclear Engineering and Technology 48 (2) (2016) 376-385.   DOI
4 L. Brockmeyer, L.B. Carasik, E. Merzari, Y. Hassan, Numerical simulations for determination of minimum representative bundle size in wire wrapped tube bundles, Nucl. Eng. Des. 322 (2017) 577-590.   DOI
5 Y.B. Chen, K. Ip, N.E. Todreas, Velocity Measurements in Edge Subchannels of Wire Wrapped LMFBR Fuel Assemblies (No. COO-2245-11TR). Massachusetts Inst. Of Tech, Dept. of Nuclear Engineering, Cambridge (USA), 1974.
6 J.H. Jeong, J. Yoo, K.L. Lee, K.S. Ha, Three-dimensional flow phenomena in a wire-wrapped 37-pin fuel bundle for SFR, Nuclear Engineering and Technology 47 (5) (2015) 523-533.   DOI
7 J.H. Jeong, M.S. Song, K.L. Lee, CFD investigation of three-dimensional flow phenomena in a JAEA 127-pin wire-wrapped fuel assembly, Nucl. Eng. Des. 323 (2017) 166-184.   DOI
8 ANSYS CFX-Solver Modeling Guide, ANSYS CFX Release 16 (1) (2015).
9 M.N. Raj, K. Velusamy, Characterization of velocity and temperature fields in a 217 pin wire wrapped fuel bundle of sodium cooled fast reactor, Ann. Nucl. Energy 87 (2016) 331-349.   DOI
10 J. Jeong, F. Hussain, On the identification of a vortex, J. Fluid Mech. 285 (1995) 69-94.   DOI
11 N.E. Todreas, L.W. Wilson, Coolant Mixing in Sodium Cooled Fast Reactor Fuel Bundles (No. WASH-1096), Division of Reactor Development and Technology (AEC), Washington, DC, 1968.
12 R. Ranjan, C. Pantano, P. Fischer, Direct simulation of turbulent heat transfer in swept flow over a wire in a channel, Int. J. Heat Mass Tran. 54 (21-22) (2011) 4636-4654.   DOI
13 J.H. Jeong, M.S. Song, K.L. Lee, Thermal-hydraulic effect of wire spacer in a wire-wrapped fuel bundles for SFR, Nucl. Eng. Des. 320 (2017) 28-43.   DOI
14 J.H. Jeong, M.S. Song, K.L. Lee, RANS based CFD methodology for a real scale 217-pin wire-wrapped fuel assembly of KAERI PGSFR, Nucl. Eng. Des. 313 (2017) 470-485.   DOI
15 R. Gajapathy, K. Velusamy, P. Selvaraj, P. Chellapandi, S.C. Chetal, A comparative CFD investigation of helical wire-wrapped 7, 19 and 37 fuel pin bundles and its extendibility to 217 pin bundle, Nucl. Eng. Des. 239 (11) (2009) 2279-2292.   DOI
16 T. Ohtake, S. Uruwashi, K. Takahashi, Velocity measurements in the subchannel of the wire-spaced subassembly, Nucl. Technol. 30 (3) (1976) 333-349.   DOI