Study on the irradiation effect of mechanical properties of RPV steels using crystal plasticity model |
Nie, Junfeng
(Institute of Nuclear and New Energy Technology, Collaborative Innovation Center of Advanced Nuclear Energy Technology, Key Laboratory of Advanced Reactor Engineering and Safety of Ministry of Education, Tsinghua University)
Liu, Yunpeng (Institute of Nuclear and New Energy Technology, Collaborative Innovation Center of Advanced Nuclear Energy Technology, Key Laboratory of Advanced Reactor Engineering and Safety of Ministry of Education, Tsinghua University) Xie, Qihao (Data Science and Information Technology Research Center, Tsinghua-Berkeley Shenzhen Institute) Liu, Zhanli (Applied Mechanics Lab., School of Aerospace Engineering, Tsinghua University) |
1 | A. Ma, F. Roters, D. Raabe, A dislocation density based constitutive model for crystal plasticity FEM including geometrically necessary dislocations, Acta Mater. 54 (8) (2006) 2169-2179. DOI |
2 | L. Vincent, M. Libert, B. Marini, et al., Towards a modelling of RPV steel brittle fracture using crystal plasticity computations on polycrystalline aggregates, J. Nucl. Mater. 406 (2010) 91-96. DOI |
3 | Fabien Onimus, Jean-Luc Bechade, A polycrystalline modeling of the mechanical behavior of neutron irradiated zirconium alloys, J. Nucl. Mater. 384 (2009) 163-174. DOI |
4 | Xiazi Xiao, Dmitry Terentyev, Long Yu, et al., Modelling irradiation-induced softening in BCC iron by crystal plasticity approach, J. Nucl. Mater. 466 (2015) 312-315. DOI |
5 | E. Schmid, W. Boas, Plasticity of crystals, Aeronaut. J. 54 (479) (1950) 353-719. |
6 | E.P. Busso, Cyclic Deformation of Monocrystalline Nickel Aluminide and High Temperature Coatings, Doctoral Thesis, Massachusetts Institute of Technology, Cambridge, 2005. |
7 | E. Orowan, Zur Kristallogr, Z. Phys. 89 (3/4) (1934) 327-343. |
8 | U. Essmann, H. Mughrabi, Annihilation of dislocations during tensile and cyclic deformation and limits of dislocation densities, Philos. Mag. A 40 (1979) 731. DOI |
9 | A. Arsenlis, D.M. Parks, Modeling the evolution of crystallographic dislocation density in crystal plasticity, J. Mech. Phys. Solid. 50 (2002) 1979-2009. DOI |
10 | U.F. Kocks, A statistical theory of flow stress and work-hardening, Philos. Mag. 13 (1966) 541-566. DOI |
11 | Y. Estrin, H. Mecking, A unified phenomenological description of work hardening and creep based on one-parameter models, Acta Metall. 32 (1984) 57-70. DOI |
12 | C. Deo, C. Tome, R. Lebensohn, et al., Modeling and simulation of irradiation hardening in structural ferritic steels for advanced nuclear reactors, J. Nucl. Mater. 377 (1) (2008) 136-140. DOI |
13 | Anirban Patra, L. David, McDowell, Crystal plasticity-based constitutive modelling of irradiated bcc structures, Philos. Mag. A 92 (7) (2011) 1-27. |
14 | Hibbitt Karlsson, Sorensen, ABAQUS/Standard User's Manuals., v6.5, 2005. |
15 | Yun Lin, Guang-sheng Ning, Chang-yi Zhang, et al., Mechanical property of China A508-3 steel after neutron irradiation, Energy Sci. Technol. 50 (02) (2016) 204-207. |
16 | R.A. Johnson, D.J. Oh, Analytic embedded atom method model for BCC metals, J. Mater. Res. 4 (5) (1989) 1195-1201. DOI |
17 | D. Brunner, J. Diehl, Strain-rate and temperature dependence of the tensile flow stress of high-purity -iron above 250 K (regime I) studied by means of stress-relaxation tests, Phys. Status Solidi Appl. Res. 124 (1) (1991) 155-170. DOI |
18 | W.A. Spitzig, A.S. Keh, The role of internal and effective stresses in the plastic flow of iron single crystals, Metall. Mater. Trans. B 1 (12) (1970) 3325-3331. |
19 | X.M. Bai, H. Ke, Y. Zhang, et al., Modeling copper precipitation hardening and embrittlement in a dilute Fe-0.3at.%Cu alloy under neutron irradiation, J. Nucl. Mater. 495 (2017) 442-454. DOI |
20 | M.F. Ashby, Mechanisms of deformation and fracture, Adv. Appl. Mech. 23 (1983) 117-177. DOI |
21 | P. Zhang, M. Karimpour, D. Balint, et al., A controlled Poisson Voronoi tessellation for grain and cohesive boundary generation applied to crystal plasticity analysis[J], Comput. Mater. Sci. 64 (2012) 84-89. DOI |
22 | E. Meslin, M. Lambrecht, M. Hernandez-Mayoral, et al., Characterization of neutron-irradiated ferritic model alloys and a RPV steel from combined APT, SANS, TEM and PAS analyses, J. Nucl. Mater. 406 (1) (2009) 73-83. DOI |
23 | Junfeng Nie, Zhenrui Tang, et al., Crystal plasticity constitutive model for BCC based on the dislocation density[J], J. Tsinghua Univ. 57 (2017) 780-784. |
24 | J.W. Hutchinson, Plastic stress-strain relations of F.C.C polycrystalline metals hardening according to Taylor's rule[J], J. Mech. Phys. Solid. 12 (1) (1964) 11-24. DOI |
25 | Lemaitre, A Course on Damage Mechanics, Springer-Verlag, 1996. |
26 | Feng Lu, Ke-shi Zhang, Guang Zhang, et al., Anisotropic damage model under continuum slip crystal plasticity theory for single crystals, Int. J. Solid Struct. 39 (20) (2002) 5279-5293. DOI |
27 | Zhao-liang Wang, The Research of Inhomogenous Plastic Deformation and Damage of Metal Materials, Master's Thesis, Guangxi University, Nanning, 2016. |
28 | Y. Estrin, H. Mecking, A unified phenomenological description of work hardening and creep based on one-parameter models, Acta Metall. 32 (1) (1984) 57-70. DOI |
29 | T. Takeuchi, A. Kuramoto, J. Kameda, et al., Effects of chemical composition and dose on microstructure evolution and hardening of neutron-irradiated reactor pressure vessel steels, J. Nucl. Mater. 402 (2/3) (2010) 93-101. DOI |
30 | S. A Maloy, M. R James, G. Willcutt, et al., The mechanical properties of 316L/304L stainless steels, Alloy 718 and Mod 9Cr-1Mo after irradiation in a spallation environment, J. Nucl. Mater. 296 (1-3) (2001) 119-128. DOI |
31 | M.K. Miller, M.G. Burke, An atom probe field ion microscopy study of neutronirradiated pressure vessel steels, J. Nucl. Mater. 195 (1992) 68-82. DOI |
32 | R. Hill, J.R. Rice, Constitutive analysis of elastic-plastic crystals at arbitrary strain, J. Mech. Phys. Solid. 20 (6) (1972) 401-403. DOI |
33 | D. Brimbal, B. Decamps, A. Barbu, et al., Dual-beam irradiation of -iron: heterogeneous bubble formation on dislocation loops, J. Nucl. Mater. 418 (1) (2011) 313-315. DOI |
34 | C. Domain, C.S. Becquart, L. Maplerba, Simulation of radiation damage in Fe alloys: an object kinetic Monte Carlo approach, J. Nucl. Mater. 335 (1) (2004) 121-145. DOI |
35 | G.I. Taylor, Plastic strain in metals, J. Inst. Met. 62 (1938) 307-324. |
36 | R.J. Asaro, Micro mechanics of crystals and polycrystals, Adv. Appl. Mech. 23 (8) (1983) 11-15. |
37 | D. Peirce, C.F. Shih, A. Needleman, A tangent modulus method for rate dependent solids, Comput. Struct. 18 (5) (1984) 875-887. DOI |
38 | F.T. Meissornnier, E.P. Busso, N.P. O'Dowd, Finite element implementation of a generalised non-local rate-dependent crystallographic formulation for finite strains, Int. J. Plast. 17 (2001) 601-640. DOI |