1 |
ASME, ASME B&PV Code Sec. III, Nuclear Components, 1998.
|
2 |
ASME, ASME B&PV Code Sec. XI, Rules for Inservice Inspection of Nuclear Power Plant Components, 1998.
|
3 |
J.D. Stevenson, Summary of the historical development of seismic design of nuclear power plants in Japan and the U.S. Nucl. Eng. Des 269 (2014) 160-164.
DOI
|
4 |
G. Saji, Safety goals for seismic and tsunami risks: lessons learned from the Fukushima Daiichi disaster, Nucl. Eng. Des 280 (2014) 449-463.
DOI
|
5 |
USNRC, Evaluation of Potential Pipe Break, NUREG-1061 Vol. 3, 1984.
|
6 |
USNRC, The Effect of Cyclic and Dynamic Loading on the Fracture Resistance of Nuclear Piping Steels, NUREG/CR-6440, 1996.
|
7 |
C.S. Seok, K.L. Murty, A study on the decrease of fracture resistance curve under reversed cyclic loading, Int. J. Pres. Ves. Piping 77 (2000) 303-311.
DOI
|
8 |
P.K. Singh, V.R. Ranganath, S. Tarafder, P. Prasad, V. Bhasin, K.K. Vaze, H.S. Kushwaha, Effect of cyclic loading on elastic-plastic fracture resistance of PHT system piping material of PHWR, Int. J. Pres. Ves. Piping 80 (2003) 745-752.
DOI
|
9 |
B. Tranchand, S. Chapuliot, V. Aubin, S. Marie, M. Bourgeois, Ductile Fracture Analysis Under Large Amplitude Cycles, Proc. ASME PVP Conf. PVP2014-PVP28426, 2014.
|
10 |
T. Chowdhury, S. Sivaprasad, H.N. Bar, S. Tarafder, N.R. Bandyopadhyay, Cyclic fracture behaviour of 20MnMoNi55 steel at room and elevated temperatures, Fat. Frac. Eng. Mater. Struc 38 (2015) 813-827.
DOI
|
11 |
H. Roy, S. Sivaprasad, S. Tarafder, K.K. Ray, Monotonic vis-a-vis cyclic fracture behavior of ANSI 304LN stainless steel, Eng. Frac. Mech 76 (2009) 1822-1832.
DOI
|
12 |
S.K. Gupta, V. Bhasin, J. Chattopadhyay, A.K. Ghosh, R.K. Singh, Cyclic-tearing behavior and JeR curves of Indian NPP pipes under displacement-controlled cyclic loading, Int. J. Pres. Ves. Piping 132-133 (2015) 72-86.
DOI
|
13 |
ASTM, Standard Test Method for Measurement of Fracture Toughness, ASTM E1820-09, 2009.
|
14 |
USNRC, Development of Technical Basis for Leak-Before-Break Procedure, NUREG/CR-6765, 2002.
|
15 |
H.H. Johnson, Calibrating the electric potential method for studying slow crack growth, Mater. Res. Stand 5 (1965) 442-445.
|
16 |
J.A. Joyce, G.E. Sutton, An automated method of computercontrolled low-cycle fatigue crack growth testing using the elasticeplastic parameter cyclic J, ASTM STP 877 (1985) 227-247.
|
17 |
J.W. Kim, I.S. Kim, Investigation of dynamic strain aging on SA106 Gr. C piping steel, Nucl. Eng. Des 172 (1997) 49-59.
DOI
|
18 |
J.A. Joyce, E.M. Hackett, C. Roe, Effect of cyclic loading on the deformation and elastic-plastic fracture behaviour of cast stainless steel, ASTM STP 1207 (1994) 722-741.
|
19 |
J.W. Kim, M.R. Choi, Effect of loading rate on the deformation behavior of SA508 Gr. 1a low-alloy steel and TP316 stainless steel pipe materials at RT and , Trans. KSME (A) 39 (2015) 383-390.
|
20 |
USNRC, Effect of Dynamic Strain Aging on the Strength and Toughness of Nuclear Ferritic Piping at LWR Temperatures, NUREG/CR-6226, 1994.
|
21 |
J.H. Yoon, B.S. Lee, Y.J. Oh, J.H. Hong, Effects of loading rate and temperature on JeR fracture resistance of an SA516eGr.70 steel for nuclear piping, Int. J. Pres. Ves. Piping 76 (1999) 663-670.
DOI
|