Browse > Article
http://dx.doi.org/10.9725/kts.2020.36.2.75

Development of Mechanical Face Seal in 75-tonf Turbopump for Leakage Reduction  

Bae, JoonHwan (Turbopump Department, Korea Aerospace Research Institute)
Kwak, Hyun-Duck (Turbopump Department, Korea Aerospace Research Institute)
Lee, ChangHun (Mechanical Seal R&D Team, Flowserve KSM)
Choi, JongSoo (Department of Aerospace Engineering, Chungnam National University)
Publication Information
Tribology and Lubricants / v.36, no.2, 2020 , pp. 75-81 More about this Journal
Abstract
In this paper, we present an experimental investigation of the leakage and endurance performances of mechanical face seals in a 75-tonf turbopump for the Korea Space Launch Vehicle II first-stage engine. A mechanical face seal is used between the fuel pump and turbine to prevent mixing of the fuel and turbine gas. However, excessive leakage occurs through the carbon attached to the mechanical face seal bellows. To reduce this leakage, we redesign the mechanical face seal such that the contact area between the fuel and carbon is reduced, height of the carbon nose is reduced, and stiffness of the bellows is increased. Then, we conduct static and dynamic leakage tests and endurance tests to compare the performances of the original and modified mechanical face seals. The investigation of the leakage of the old and new mechanical face seals confirms that the leakage performance is significantly improved, by 80%, in the new design in comparison with the old design. The endurance tests demonstrate that the average wear rate of carbon in the new mechanical face seal is 0.1094 ㎛/s. The service lifetime is predicted to be 4,200 s, which is 28 times greater than the requirement. Finally, we present a new mechanical face seal in a 75-tonf turbopump, and perform a validation test in the real-propellant test facility at the NARO Space Center. Based on the test results, we can confirm that the modified mechanical face seal works well under real operating conditions.
Keywords
turbopump; mechanical face seal; wear rate; leakage; performance test;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Kwak, H. D., Kim, D. J., Kim, J. S., Kim, J. H., Noh, J. G., Park, P. J., Bae, J. H., Shin, J. H., Yoon, S. H., Lee, H. G., Jeon, S. M., Jeong, E. H., Choi, C. H., Hong, S. S., Kim, S. L., Kim, S. H., Han, Y. M., "Performance Test of a 7 tonf Liquid Rocket Engine Turbopump", Journal of the Korean Society of Propulsion Engineers, Vol.19, No.2, pp.65-72, 2015.   DOI
2 Jeong, E. H., Kwak, H. D., Kim, D. J., Kim, J. S., Noh, J. G., Park, M. J., Bae, J. H., Shin, J. H., Wang, S. W., Yoon, S. H., Lee, H. G., Jeon, S. M., Choi, C. H., Hong, S. S., Kim, S. L., Kim, S. H., Han, Y. M., Kim, J. H., "Performance Test of a 75 tonf Rocket Engine Turbopump", Journal of the Korean Society of Propulsion Engineers, Vol.20, No.2, pp.86-93, 2016.   DOI
3 Lee, H., Shin, J., Jeong, E., and Choi, C., "Turbine Performance Experiments for the Turbopump of a Liquid Rocket Engine," International Journal of Aerospace System Engineering, 3, pp.25-29, 2016.   DOI
4 Kwak, H. D., Jeon, S. M., Kim, J., "Acceptance Test of a Mechanical Face Seal for Turbopumps", KFMA Journal of Fluid Machinery, Vol.10, No.1, pp.20-25, 2007.   DOI
5 Jeon, S. M., Kwak, H. D., Park, M. J., Kim, J. H., "Mechanical Face Seal Performance Test for 75ton Class Turbopump", J. Korean Soc. Tribol. Lubr. Eng., Vol. 25, No.3, pp.187-191, 2009, https://doi.org/10.9725/kstle.2009.25.3.187
6 Bae, J. H., Kwak, H. D., Choi, C. H., "Study on the Mechanical Face Seal Performance for a 7-ton-Class Turbopump", J. Korean Soc. Tribol. Lubr. Eng., Vol.32, No.5, pp.154-159, 2016, https://doi.org/10.9725/kstle.2016.32.5.154
7 Alan O. Lebeck, Principles and design of mechanical face seals, Chap.1, pp.13, A Wiley-Interscience Publication, Hoboken, USA, 1991.(ISBN 0-471-51533-7)
8 Kim, J. S., Han, Y. M., Ko, Y. S., "Construction and Validation Test of Turbopump Real-propellant Test Facility", Journal of the Korean Society of Propulsion Engineers, Vol.19, No.4, pp.85-93, 2015.   DOI
9 Kim, J., Lee, E. S., Choi, C. H., and Jeon, S. M.,"Current Status of Turbopump Development in Korea Aerospace Research Institute", IAC-04-S.P.17, International Astronautical Congress 2004, Vancouver, Canada, October 2004.
10 Kim, J., Hong, S. S., Jeong, E. H., Choi, C. H., and Jeon, S. M., "Development of a Turbopump for a 30 Ton Class Engine," AIAA Paper 2007-5516, 43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Cincinnati, OH, July 2007.