Browse > Article
http://dx.doi.org/10.9725/kts.2018.34.4.125

A Study on the Design of a Double Cantilever Structure Friction Tester for Precision Friction Measurement  

Kang, Won-Bin (Department of Precision Mechanial Engineering, Kyungpook National University)
Kim, Hyun-Joon (Department of Precision Mechanial Engineering, Kyungpook National University)
Publication Information
Tribology and Lubricants / v.34, no.4, 2018 , pp. 125-131 More about this Journal
Abstract
A precision tribometer consisting of a cantilever was designed to measure frictional forces in the micro-Newton range. As frictional forces are measured based on the bending of the cantilever, vibration of the cantilever is the most significant factor affecting the quality of the friction measurement. Therefore, improved design of the tribometer with double cantilevers and a connecting plate that united the two cantilevers mechanically was suggested. For the verification of the modified design of the tribometer, numerical analysis and experiments were conducted. Examination using the finite element method revealed that the tribometer with a double cantilever and a connecting plate exhibited faster damping characteristics than the tribometer with a single cantilever. In the experiment, effectiveness of the double cantilever and connecting plate for vibration reduction was also confirmed. Vibration of the tribometer with double cantilever decreased eight times faster than that of the tribometer with a single cantilever. The faster damping of the double cantilever design is attributed to the mechanical interaction at the contacting surfaces between the cantilever and the connecting plate. Tribotesting using the tribometer with a single cantilever resulted in random fluctuation of frictional forces due to the stick-slip behavior. However, using the tribometer with a double cantilever and connecting plate for the tribotest gave relatively uniform and steady measurement of frictional forces. Increased stiffness owing to using a double cantilever and mechanical damping of the connecting plate were responsible for the stable friction signal.
Keywords
precision tribometer; cantilever; vibration analysis; finite element analysis; Stick-slip;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Malek, C. K., Saile, V., "Applications of LIGA technology to precision manufacturing of high-aspect-ratio micro-components and -systems: a review", Microelectron. J., Vol. 35, pp. 131-143, 2004.   DOI
2 Shikida, M., Masuda, T., Uchikawa, D., Sato, K., "Surface roughness of single-crystal silicon etched by TMAH solution", Sens. Actuator A-Phys., Vol. 90, pp. 223-231, 2001.   DOI
3 Patton, S. T., Zabinski, J. S., "Failure mechanisms of a MEMS actuator in very high vacuum", Tribol. Int., Vol. 35, pp. 373379, 2002.
4 Bhushan, B., Principles an Applications of Tribology, Chap. 12, pp. 812, John Wiley & Sons, Inc., 1999. (ISBN : 0471594075)
5 Czichos, H., Becker, S., Lexow, J., "Multilaboratory tribotesting: Results from the Versailles Advanced Materials and Standards programme on wear test methods", Wear, Vol. 114, pp. 109-130, 1987.   DOI
6 Khadem, M., Penkov, O. V., Pukha, V. E., Maleyev, M. V., Kim, D.-E., "Ultra-thin nano-patterned wearprotective diamond-like carbon coatings deposited on glass using a C60 ion beam", Carbon, Vol. 80, pp. 534-543, 2014.   DOI
7 Kim, H.-G., Kim, T.-H., Kim, J., Jang, Y.-J., Kang, Y.-J., Kim, D.-E., "Water Lubrication Characteristics and Effect of Nano Particles based on the Substrate", J. Korean Soc. Tribol. Lubr. Eng., Vol. 33, No. 6, pp. 245-250, 2017.
8 Sader, J., E., "Calibration of rectangular atomic force microscope cantilevers", Rev. Sci. Instrum., Vol. 70, pp. 3967, 1999.   DOI
9 Varenberg, M., Etsion, I., Halperin, G., "An improved wedge calibration method for lateral force in atomic force microscopy", Rev. Sci. Instrum., Vol. 74, pp. 3362, 2003.   DOI
10 Celis, J.-P., Ponthiaux, P., Testing Tribocorrosion of Passivating Materials Supporting Research and Industrial Innovation: A Handbook, Maney Publishing, 2011, (ISBN 1907975209).
11 Kim, H.-J., Kim, D.-E., "Molecular dynamics simulation of atomic-scale frictional behavior of corrugated nano-structured surfaces", Nanoscale, Vol. 4, pp. 3937-3944, 2012.   DOI
12 Muser, M. H., "Nature of Mechanical Instabilities and Their Effect on Kinetic Friction", Phys. Rev. Lett., Vol. 89, pp. 224301, 2002.   DOI
13 Kim, H.-J., Kim, D.-E., "Nano-scale friction: A review", Int. J. Precis. Eng. Man., Vol. 10, pp. 141-151, 2009.
14 Kim, H.-J., Kim, H.-W., Precise tribometer operated with low load, Kyungpook National University., KR Patent No. 10-1793593, 2017.