1 |
J. Robertson, Mater., "Diamond-like amorphous carbon", Sci. Eng., R Rep., Vol. 37, pp. 129-281, 2002.
DOI
|
2 |
Grill, A., "Diamond-like carbon: state of the art", Diamond RM., Vol. 8, pp. 428-434, 1999.
DOI
|
3 |
Nir, D., "Stress relief forms of diamond-like carbon thin films under internal compressive stress", Thin Solid Films., Vol. 112, pp. 41-50, 1984.
DOI
|
4 |
Liu, Y., Erdemir, A., Meletis, E. I. "A study of the wear mechanism of diamond-like carbon films", Surf. Coat. Technol., Vol. 82, pp. 48-56, 1996.
DOI
|
5 |
Vercammen, K., Haefke, H., Gerbig, Y., Hulsel, A.V., Pfluger, E., Meneve, J. "A comparative study of state-of-the-art diamond-like carbon films", Surf. Coat. Technol. Lett., Vol. 133, pp. 466-472, 2000.
|
6 |
Chen, L., Yang, M. C., Song, C. F., Yu, B. J., Qian, L. M., "Is 2 nm DLC coating enough to resist the nanowear of silicon", Wear., Vol. 302, pp. 909-917, 2013.
DOI
|
7 |
Wei, Chehung, Yen, J.-Y., "Effect of film thickness and interlayer on the adhesion strength of diamond like carbon films on different substrates", Diamond RM., Vol. 16, pp. 1325-1330, 2007.
DOI
|
8 |
Crombez, R., McMinis, J., Veerasamy, V. S., Shen, W., "Experimental study of mechanical properties and scratch resistance of ultra-thin diamond-like-carbon (DLC) coatings deposited on glass", Tribology International., Vol. 44, pp. 55-62, 2011
DOI
|
9 |
Huang, L. Y., Zhao, J. W., Xu, K. W., Lu, J., "A new method for evaluating the scratch resistance of diamond-like carbon films by the nano-scratch technique", Diamond Relat. Mater., Vol. 11, pp. 1454-1459, 2002.
DOI
|
10 |
Nakao, S., Kim, J., Choi, J., Miyagawa, S., Miyagawa, Y., Ikeyama, M., "Micro-scratch test of DLC films on Si substrates prepared by bipolar-type plasma based ion implantation", Surf. Coat. Technol. Lett,, Vol. 201, pp. 8334-8338, 2007.
DOI
|
11 |
Zaidi, H., Djamail, A., Chin, K. J., Mathia, T., "Characterisation of DLC coating adherence by scratch testing", Tribology International., Vol. 39, pp. 124-128, 2006.
DOI
|
12 |
Cho, K. M., Ahn, H.-S., Kim, D. E. "Tribological behavior of DLC coatings at various humidities", Trans. Korean Soc. Mech. Eng. A., Vol. 26, No. 9, pp. 1842-1848, 2002.
DOI
|
13 |
Zawischa, M., Makowski, S., Schwarzer, N., Weihnacht, V., "Scratch resistance of superhard carbon coatings - A new approach to failure and adhesion evaluation", Surf. Coat. Technol., Vol. 308, pp. 341-348, 2016.
DOI
|
14 |
Caro, J., Cuadrado, N., Gonzalez, I., Casellas, D., Prado, J. M., Vilajoana, A., Artus, P., Peris, S., Carrilero, A., Dursteler, J. C. "Microscratch resistance of ophthalmic coatings on organic lenses", Surf. Coat. Technol., Vol. 205, pp. 5040-5052, 2011.
DOI
|
15 |
Bull, S. J. "Failure modes in scratch adhesion testing", Surf. Coat. Technol., Vol. 50, pp. 25-32, 1991.
DOI
|
16 |
Bull, S. J., Berasetegui, E. G., "An overview of the potential of quantitative coating adhesion measurement by scratch testing", Tribology International., Vol. 39, pp. 99-114, 2006.
DOI
|
17 |
Lee, J. H., Park, T. J. "Indentation and Sliding Contact Analysis between a Rigid Ball and DLC-Coated Steel Surface : Influence of Supporting Layer Thickness", J. Korean Soc. Tribol. Lubr. Eng., Vol. 30, No. 4, pp. 199-204, 2014.
DOI
|