Browse > Article
http://dx.doi.org/10.9725/kstle.2014.30.2.86

Tooth Profile Analysis for Face Gear with 1:2 Gear Ratio in Handpiece with 160° Contra Angle  

Choi, Jihun (Graduate School, Dept. of Mechanical Engineering, Yeungnam University)
Ahn, Sukyeong (Graduate School, Dept. of Mechanical Engineering, Yeungnam University)
Park, Sangshin (School of Mechanical Engineering, Yeungnam University)
Publication Information
Tribology and Lubricants / v.30, no.2, 2014 , pp. 86-91 More about this Journal
Abstract
This paper presents a design procedure for a face gear and pinion used in a handpiece with a $160^{\circ}\acute{y}$ contra angle and 1:2 gear ratio. Based on the geometric theory of gearing, the tooth profile of the face gear and pinion is developed. To analyze the contact pressure, the gear profile should be determined before calculating the stress between the two gears. The concept of calculating the face gear profile is that it can be generated by the coordinate transformation of the shaper profiles, which have involute curves, using a simulation method from the gear manufacturing process.
Keywords
face gear; shaper; pinion; shaft angle; tooth profile;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Litvin, F. L. Fuentes, A., Gear Geometry and Applied Theory, pp. 508-524, Cambridge University Press, 2004. (ISBN-13: 978-0521815178)
2 Litvin, F. L., "Handbook on Face Gear Drives With a Spur Involute Pinion", NASA/CR-2000-209909, 2000.
3 Chung, T.-D., Chang, S. H., "The Undercutting and Pointing of Face-gears", J. Chin. Inst. Eng., Vol. 21, No. 3, pp.181-188, 1998.   DOI
4 Logue, C. H., American Machinist Gear Book, pp. 139-147, University Press of the Pacific, 2001. (ISBN-13: 978-0898756869)
5 Radzevich, S. P., Dudley's Gear Handbook of Practical Gear Design and Manufacture, 2nd Edition, pp. 209-293, CRC Press, 2012. (ISBN-13: 978-1439866016)
6 "American Gear Manufactures Association Standard System", AGMA 203.03.